| Age | Commit message (Collapse) | Author |
|---|
|
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For deco stops show the gas of the next segment in the table. In
recalculation remove old deco stops earlier.
In struct diveplan, the items are "segments" with a beginning, a duration,
and a gas. In contrast, the UI of the planner uses "waypoints" which are
the boundaries between segments. It is conventional at least for deco
stops to display the gas of the _next_ segment in the runtime table (i.e.
the gas possibly to be switched to).
Furthermore, in addStop, the old deco stops have to be removed earlier as
otherwise a new waypoint later than a previous generated gas switch
inherits the gas of the old switch.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The depth types are unsigned for dive plan datapoints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When a manually added dive is saved we cancel the plan. In that process
we throw away the cylinders which triggers a redraw of the profile. Which
tries to access the diveplan and its data points that have already been
freed. BOOM.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixed connections to call drawProfile() in diveplanner whenever cylinder
table widget is edited.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Model derived from tableview is expected to have remove slot,
which is missing in DivePlannerDisplay currently. This patch fixes
the annoying warning message while starting Subsurface because of
not including remove slot.
Currently there is lot of work to do, that either requires modifying
the model to skip 'remove' slot or find a way to make them inactive.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Currently user can edit content in compute waypoints table
(in PLAN mode), ofcourse this does not trigger any calculations in
the code, but user cannot see the content he needs to see after edit.
This patch makes the content uneditable.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Nothing exciting here, just a few independent changes close to each other.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Recently Robert Helling provided a patch "Distinguish between entered and
calculated waypoints" in an attempt to distinguish between entered and
calculated stops.
This patch is an independent (content wise) extension of the above
patch and is built relative to it which adds new table to display
computed waypoints in plan mode.
Currently table includes only two columns "Comp. Depth" and "Comp.
Duration", which can extended to show further information.
This is only a start to the UI interaction in PLAN mode.
In addition to this there are many TODO things that diveplan feature
demands
TODO:
1. Show more details through "Computed Waypoints" table.
2. Remove tooltip from "Computed Waypoints" table widget.
3. Make contents in "Computed Waypoints" table widget non-editable.
4. Fix error when trying to save dive plan without using cylinder data.
5. Make dive plan editable after saving it.
6. Improvise dive planner graphics window.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Just treat it as a cancel instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In bf205726 DEPTH/Switch at was disabled by commenting out that code.
This puts it back behind ifdefs
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Hugle <wulong@comp.nus.edu.sg>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes #464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch fixes the colors on the new profile, the init of the colors map
was not being done. This fixes it.
A few problems were spotted on the new profile dealing with the ruler
graph and a newly added dive, when using the dive add dialog.
I'll be on it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We can't keep the cache around (even though it's tempting) as the next
iteration might change the start time of the planned dive or other
parameters which would make the cached data invalid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Decrease depth by tapping left part of widget. Icon is showing "up" (i.e. closer to surface).
Increase depth by tapping right part of widget. Icon is showing "down" (i.e. deeper).
Fixes #354
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the variable was inside of an inner scope this was technically legal,
but it's just too annoying for words.
(The diff in the commit doesn't make this obvious, but outside the for
loop in the same function there is a divedatapoint *dp, so we had a
pointer to divedatapoint and a divedatapoint with the same name...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I could have gone either way - the other alternative would have been to
remove the argument to the function. But since current_dive is a macro
and since the semantic of the function make sense with the argument being
passed in, it seemed better to just not use current_dive in the function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I think that catches all the ones we missed (thanks clang -Wfloat-equal).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
* Move variable members construction to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
* Add missing variable members to the initializer lists.
* Add *lazy* structure initializations.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
* Add missing DivePlannerPointsModel::tempDive to the constructor
initialize list.
* ExpanderGraphics class: Construct pointer-variable members into
initialize list,
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the planner is disabled this column isn't needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code was obviously bogus before.
Fixes #429
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the index is out of range, just return black.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Memory leaks were caused by broken parent/child relations.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I had problems with this one on Qt5.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
QList is optimized for storing pointer-sized items, thus
a QVector is the better choice for everything else.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is easier to read and also avoids an incorrect gcc warning.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The fix for dereferencing a null pointer from me was a bad fix that
broke the possibility of saving a planned dive as a dive.
This is a better fix to not dereference a null pointer and be able to
save the plan again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch makes sure that the minimum time / depth is
correctly set on the profile planner.
Fixes: #358
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If createTemporaryPlan was called on a empty diveplan.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If rowCount() is 0 we get an assert:
ASSERT: "last >= first" in file kernel/qabstractitemmodel.cpp...
To solve that we wrap the beginRemoveRows() call in a bnrach:
if (rowCount() > 0) {
...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Initialize diveplan.dp to NULL, so we know that we will bail in
drawProfile, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Initialize stagingDive to NULL, so we know that we will bail in
createTemporaryPlan, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is so we can default to the GF's from the preferences. We need the
bail handler in createTemporaryPlan, because its triggered when we
change GF's, and if we don't have a stagingDive there, we will access a
NULL-pointer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When got auto-rescaling of the depth scale, always reset the depth scale
to what the profile would suggest. This introduces a concept of user
requested minimum witch we will update and not scale down to lower than.
Reported-by: Henrik Brautaset Aronsen <henrik@synth.no>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
Dirk Hohndel
Lakshman
Tomaz Canabrava
Robert Helling
Anton Lundin
Hugle
Linus Torvalds
Tomaz Canabrava
Andrey Zhdanov
Boris Barbulovski
Lubomir I. Ivanov