| Age | Commit message (Collapse) | Author |
|---|
|
Spin boxes for pO2 are now hooked up to preference values. Adding new
cylinders (or changing their fo2) computes the MOD accordin to the current
value of decopo2. Note that chaning the limits for deco pO2 does _not_
automatically update the switch depth of all cylinders as those might have
been manually entered.
Furthermore, MOD has now to option of rounding to multiples of a given
depth. That is used for the automatic switch depth which are now always
multiples of 3m (so that EAN50 is switched to at 21m rather than 22m).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This enables so we can change the decent speed for drop like a stone
mode.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Qt didn't find the right function without the type there. This also gets
rid of the warning about that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That provides some UI elements that were recently introduced with function
of allowing the ascent rates of the planner to be configured by the user.
I tried to make it work both with senisble as well as with imperial units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Most of my dives i plan i know it will just be full speed down a line in
the beginning and thus the planner can figure out that leg of the plan
by it self.
The config box added here isn't connected, because i saw that the other
planner boxes wasn't connected ether, so i left it in the same state as
they where.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Back in 6699e3ab ("Add print button to planner") unconditional printing
code was added. This puts that same code behind NO_PRINTING macro.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
QSpinBox is nice to see how different sac rate would affect our dive
plan.
"Hey, What would happen if I would be stressed and my sac goes up by 50%?"
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In planner mode, this replaces the globe with the dive plan and introduces
a new plannerSettingsWidget in the diveListPane. All new fields are still
disfunctional. This is WIP.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's kinda bogus, but since we add it to the Vector, we might as well
initialize all of it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The planner has its own view of the gradient factors. So replacing those
with the ones set up for viewing dives in the preferences is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While planning we might change the gradient factors. Make sure they are
back to what's in the preferences when we're done planning.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In most cases this wouldn't really matter, but when planning very deep or
very long dive with corresponding very long deco times, calculating the
deco takes long enough to make this notable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was only semi-implemented the first time around. Now we really only
copy the ones that are indeed used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems intuitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The edit starts with the current value, but our data() function didn't
return that in the edit role.
Thanks Tomaz for explaining this to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There are new check-boxes to modify the look of the diveplan in the notes.
The old behaviour appears with "verbatim display", others are shorter,
runtimes, stoplengths and transitions being optional. Also round to full
meters and minutes to remove optical clutter.
To be done: Remember these setting in the config.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order to call this as slot it needs to have defaults for all arguments.
So we need to change the gasmix into a pointer - which is actually better
as this allows to easily pass a NULL pointer when we want to continue to
use the previous gas.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
addStop, addGas and createSimpleDive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is step one of many to use gasmix instead of int o2/he.
Right now some of these changes look ridiculous because after changing a
few lines we immediately go back to o2 = get_o2(gas). The reason is that I
wanted to convert a hand full of functions at a time. So in this commit I
only change validate_gas(), get_gas_from_events() and get_gasidx() to use
a struct gasmix instead of int o2, int he.
This state builds and survived some mild testing. Let's continue on top of
that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This reverts commit 7d42b53bba235894668ed1f2da3f5d17cd97b9c5.
With the addition of the dive plan details widget we no longer want to
show the deco points in the dive planner points table.
Conflicts:
qt-ui/diveplanner.cpp
|
|
We want the disclaimer in the final dive that can be printed, but it's
distracting when shown while planning the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That was easy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise the change to the Cylinder widget would trigger a recreation of
the dive in an inconsistent state.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was introduced in commit fc1336107930 ("Don't crash if we try to save
a empty plan") - but it doesn't seem to make any sense. It is perfectly
reasonable for the diveplan to have no datapoints at this spot - we are
just about to call createTemporaryPlan() which will fill those datapoints
from the mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise we'll happily go back and access the freed data structures
later. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The planner would offer an text-editor if the user double
clicked it's remove column. forbidding that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Besides not deleting them, we shouldn't offer the icon for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch forbids deletion of the Deco Stop from the
QTableView that holds the model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't want to do this when calling plan() from createTemporaryPlan() -
we only want to record the dive at the end of createPlan().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of even trying to keep one around (which then could cause all
kinds of trouble) we now always delete it at the end of the planner.
So simply always recreate one when starting the planner (and make sure
that the staging dive has always been cleared out, first).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we first ADD a dive and then PLAN a dive, stagingDive first was an
alias to the current_dive (for ADD) - we need to make sure that when PLAN
is started, a new dive is allocated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the stagingDive is just an alias for the current_dive (as it is in dive
ADD mode), there's no need to copy the cylinders; they are already there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Moved the connections between DivePlannerPointsModel and
MainWindow from inside the Planner class to the MainWindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If there was no current dive we didn't set up any cylinder at all which
was a bit awkward as we use AIR but have no cylinder corresponding to it,
which breaks assumptions elsewhere.
Instead we use either the default cylinder or make one up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way it's already gone from the dive list before it gets reprocessed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were making things way too hard (and were doing things that don't need
doing, like clearing the DivePlanPointModel).
Currently we still crash after manually adding a dive or when canceling
a plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This still crashes when canceling the plan.
And doesn't display the correct dive profile until you switch to a
different dive and back.
And Keyboard focus is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This still crashes when you abort the plan.
And when you accept the plan, the profile stays stuck in PLAN mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
Anton Lundin
Henrik Brautaset Aronsen
Dirk Hohndel
Tomaz Canabrava