| Age | Commit message (Collapse) | Author |
|---|
|
Conservatism level can now be changed from gui, is saved in settings.
Also way of disabling the planner settings in the ui was improved
to support more deco models and be called at the widget creation.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
|
|
Removed recreational mode from ui and pref and replaced it with
new deco_mode enum.
Added radio button ui selection.
Set default deco_mode to Buehlmann algorithm.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
|
|
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
so it affect no longer the previous leg but all the following ones
with the same gas (i.e. until the next gaschange).
This makes the add dive/planner behaviour more consistent
with the rest of the program regarding gas changes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This disables planner UI elements in recreational mode that have no function
in that mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes #840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And place it in mainwindow.cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is the last of the current dialogs to be ported to the
new widgets system. now we need to clean the mainwindow of the
old code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were updating the dive quite a lot of times, we really didn't need to.
This will help, but not fix, the issues with plan / add dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Do the switching based on the index rather than the string (which is
translatable!).
Update set-points when turning on/off CCR mode (remeber: the rebreather
mode is stored in two places: the divemode and implicitly in the setpoitns.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Depth is often mentioned in a length unit, but what we care about is
pressure. When diving in fresh water the pressure is lower than the same
depth in salt water. This adds support for using different salinities in
planning.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When replannig a dive, offer another button that creates a new
dive rather than overwriting the old. This should help in creating
several versions of a planned dive (longer/shorter, deeper/shallower
etc). Note that this makes dives that start at the same time not
influcence each other's deco.
Also, only the first of a row of simultaneous dives contributes to
the tissue loadings of later dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply setting the pointer to NULL leaks memory.
And that C++ recursive two function implementation... oh boy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While it's nice to have immediate response to gradient factor changes,
there is an oddity that very low GFHigh values can cause infinite
decompression if the last stop is at 6m.
Robert fixed this and now errors out of deco after 48 hours, but if the
user simply wants to edit their GFHigh from (for example) 75 to 70 and
deletes the '5', we really don't want to trigger a recalculation for
GFHigh of 7...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to change the displayed numeric value of the altitutde and not just the
unit suffix when changing unit systems.
Fixes #681
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds two changes
a) it uses rint() to make sure we don't truncate the displayed values
b) it moves the update of the displayed values into a helper function that
is also called whenever the settings change
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds the code that saves and restores the dive planner
settings.
Fixes #608
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There is no reason to treat drop_stone_mode different from the rest of
the planner settings, so move it to our prefs structure.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we have a dedicated dive that we use to display things, we can
simply get the information from the current dive and use it to setup said
displayed_dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the corresponding checkbox is checked the planner does interrupt
pure O2 deco after 12min for 6min on cylinder 0.
To make this work for air I removed the gasmix_is_null logic.
I guess that makes the planner feature complete for the next release.
[Dirk Hohndel: trivial merge into latest master]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This gets rid of the stagingDive and stops the constant adding and
removing of dives from the divelist (that was an INSANE design,
seriously).
When adding or planning a dive all work is now done in the dedicated
displayed_dive.
Add dive mostly works - when the user clicks save the dive is added to the
dive list and selected.
Plan dive is mostly untested. It passed trivial "start planner, save"
testing so it's not entirely broken, but I'm sure there's more work to be
done there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes the "impossible to work with" planner with the mouse
now the dive will only grow and not shrink untill you release
the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When I moved the settings for SAC's from the planner to the plannerSettings widget
I forgot to move the corresponding methods from one class to the other.
This fixes the display of the gas consumption in the planner
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This uses the same widgets we use on the maintab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is my first attempt at grouping UI elements of the planner in a
sensible way.
It might still be sensible to combine the two bottom panes into one.
In addition there is a new field "altutude" which is sychronized with the
surface pressure as for planning we often know the altitude of the dive
site rather than the atmospheric pressure.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Spin boxes for pO2 are now hooked up to preference values. Adding new
cylinders (or changing their fo2) computes the MOD accordin to the current
value of decopo2. Note that chaning the limits for deco pO2 does _not_
automatically update the switch depth of all cylinders as those might have
been manually entered.
Furthermore, MOD has now to option of rounding to multiples of a given
depth. That is used for the automatic switch depth which are now always
multiples of 3m (so that EAN50 is switched to at 21m rather than 22m).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That provides some UI elements that were recently introduced with function
of allowing the ascent rates of the planner to be configured by the user.
I tried to make it work both with senisble as well as with imperial units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Most of my dives i plan i know it will just be full speed down a line in
the beginning and thus the planner can figure out that leg of the plan
by it self.
The config box added here isn't connected, because i saw that the other
planner boxes wasn't connected ether, so i left it in the same state as
they where.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
QSpinBox is nice to see how different sac rate would affect our dive
plan.
"Hey, What would happen if I would be stressed and my sac goes up by 50%?"
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In planner mode, this replaces the globe with the dive plan and introduces
a new plannerSettingsWidget in the diveListPane. All new fields are still
disfunctional. This is WIP.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In most cases this wouldn't really matter, but when planning very deep or
very long dive with corresponding very long deco times, calculating the
deco takes long enough to make this notable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There are new check-boxes to modify the look of the diveplan in the notes.
The old behaviour appears with "verbatim display", others are shorter,
runtimes, stoplengths and transitions being optional. Also round to full
meters and minutes to remove optical clutter.
To be done: Remember these setting in the config.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order to call this as slot it needs to have defaults for all arguments.
So we need to change the gasmix into a pointer - which is actually better
as this allows to easily pass a NULL pointer when we want to continue to
use the previous gas.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
addStop, addGas and createSimpleDive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This reverts commit 7d42b53bba235894668ed1f2da3f5d17cd97b9c5.
With the addition of the dive plan details widget we no longer want to
show the deco points in the dive planner points table.
Conflicts:
qt-ui/diveplanner.cpp
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If there was no current dive we didn't set up any cylinder at all which
was a bit awkward as we use AIR but have no cylinder corresponding to it,
which breaks assumptions elsewhere.
Instead we use either the default cylinder or make one up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
[Dirk Hohndel: combined two commits into one and cleaned up some
whitespace issues]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Jan Darowski
Tomaz Canabrava
Robert C. Helling
Joakim Bygdell
Anton Lundin
Dirk Hohndel
Robert Helling