| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This may not be the best UI, but for now it works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Don't wait until the user switches focus to a different part of the tab to
mark the location field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Plan is to make it pretty later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Hopefully we now have the UI semantics figured out.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were relying in the current_dive to display the
globe coordinates correctly - but this is not always
the case: you can be inserting a new dive site and it
isn't yet inside of the dive until the user presses
accept. So always pass the uuid of the dive site that
we want to display.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes a signal being emitted.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This method was written a long time ago, now we need to use the new
versions of it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we are modifying the dive site inside of the dive, we can't ask the
dive for the new one, and we also can't use the name of the dive site, as
there's the possibility that two or more could have the same name, so rely
only on the index of it to get the uuid. The index is variable since we
will sort the dive_site_table alphabetically, but this doesn't matter
since we are using it only temporarely to get the uuid, and this one never
changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So, remove it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The LocationEdit now correctly connects to the QComboBox signals, not the
QLineEdit signals.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch updates the DiveLocationModel when the
GeoLoockupInformationThread finishes, and also selects
the correct index for the displayed dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This class will surely be used on the mobile version, and it was very
tangled inside divepicturewidget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Loockup -> Lookup
Signed-off-by: Paul-Erik Törrönen <poltsi@777-team.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
'enable' and 'disable' is too generic, and we are only
blocking the geolocation edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I don't know what happened to me, I connected to some signals that didn't
exist at all.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So just like tags do "differential editing". Figure out what (or in this
case, who) was added / removed from the displayed dive and do the same for
all other selected dives.
This does seem a bit over top for divemaster, but this is more consistent
and therefore should make more sense to the user - assuming we ever have
one who runs into this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we accept a change on the dive site management screen, it needs to be
reflected on the Dive notes tab right away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems to make sense to only have them on the dive site screen. For the
main UI they were redundant (we have the map) and not all that useful. The
only time people would want them is if they wanted to manually add GPS
coordinates for a dive, but that should now be done via the dive site UI.
There are a couple of FIXMEs in the code and a few code blocks that have
been commented out as they will be needed in one form or another once this
GPS handling is done on the dive site UI, which right now it is NOT.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now have a working uuid - use it. And populate the fields accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is the start of the preparations to edit the dive site,
passing a uuid so we can retrieve it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Clicking on the 'Manage' button now brings you to the widget to manage it.
Nothing has been added on it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will be used to set the 'default' state. The other
two possible states right now are plan and add; those will
be created right next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
That's why it's called the displayed dive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
still needs some work
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On Ubuntu 14.04 the edit mode does not exit successfully when applying
the changes. It instead jumps back to edit mode (even though hiding the
option to apply/discard changes again). So let's just have a flag to
prevent faulty behavior.
Fixes #786
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way any extra data probided by the dive computer is visible to the
user (without other processing). This data cannot be edited by the user as
it reflects the information given by the dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While in a multi dive edit we want to apply our usual semantics (only edit
things that are the same as in the current dive), when doing an explicit
copy and paste that doesn't seem to make sense. So we manually override
that behavior.
Fixes #753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The pre-existing tissue load going into a dive can change if the start
time of a dive changes. Therefore we need to recalculate the ceiling when
editing start time (or date) of a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Reusing the displayed_dive for this caused all kind of odd problems that
were hard to reproduce, because the behavior depended on what was in the
corresponding fields of the current_dive. Worse: the GPS location handling
prevented us from reliably removing the location of a trip.
The solution isn't ideal and certainly isn't elegant. Maybe we simply
shouldn't reuse the widget here. But I think what I have now works - I
tried hard to make it break again and couldn't.
Fixes #659
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This method was being unused, rip it off.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Introduce on_location_editingFinished() and move the GPS coordinates
completion logic there. This simplifies acceptChanges(), but replaces
the clever code for multidive completion by something a little more
straightforward.
Note the call to on_location_editingFinished() from acceptChanges();
without it, completion only happens *after* the dive has been saved.
[Dirk Hohndel: trivial merge, minor changes for consistency]
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Very good patch, lots of removed lines. :)
Only try to add the tags when user accepts, discards the
test to see if the tags were changed or not, delete the
old list and copy the new one always.
only bug that's appearing now: taglist is still empty after save
we need to reselect the dive to make it appear, fixing that
on the next patch.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this patch a simple click into the main tab does not start editing
mode. Only once a value is modified do we show the message box and disable
the other widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of comparing the dive structures (which doesn't work since the
strings are actually copies), track if the user made changes.
Cylinders and weights still need to be compared as they are handled in
different widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of passing in a divenr of -1 to make it clear things this changes
things to use an options "clear" flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There is massive confusion about what we display when and where and which
dive structure (or pointer to a dive structure) contains which information
at which stage. This is the first step towards restructuring all of this.
This creates a global variable displayed_dive which at any point in time
should be what is displayed on screen (both in the profile and in the
maintab). It removes the editedDive concept from MainTab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The maintab was connecting with an invalid slot on the
new date widget, QDateTime instead of QDate
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes the TimeEdit work again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
the new date widget still needs a bit of work, but the
design is working already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also seems intuitive. What's odd is that in the Planner you get a
confirmation dialog while here you don't. We should be consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Small changes in the model to display the pictures of the dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code took an odd approach. It tried to change all selected
dives whenever the user edited a field, and kept all this backup data in
case the user rejected the edits.
This code takes the opposite approach. Only edit a copy of the selected
dive and then when the user accepts it, edit all the dives and when the
user rejects the edit simply redraw the screen (as all the "real" data is
still unchanged).
This not only saves quite a bit of code, it should be much easier to get
correct.
Admitedly this code will need quite a bit more testing to make sure it
works as intended, but as far as I can tell it already gets more scenarios
right than the previous implementation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Tomaz Canabrava
Tomaz Canabrava
Paul-Erik Törrönen
Robert C. Helling
Miika Turkia
Gaetan Bisson
Sergey Starosek