| Age | Commit message (Collapse) | Author |
|---|
|
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes #299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes #303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't do anything with this just yet.
And frankly, a drop down of the cylinders that we know of would be even
better. But hey, it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When editing a dive and clicking save button on menu bar, it saved
dive information but didn't mark dive as not being edited anymore.
For closing file, user should always click on the save button on
the bottom of the page and then saving it.
Now when clicking save button on menu bar, it will call the
accept_changes before saving to disk.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A user could have hiddden and lost any of the four panels
on the interface. Now when he chooses 'show all', if a
part of the interface is hidden, it will be shown again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
deepest ceiling.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Before, when clicking the OK button on the preferences GUI, we were
updating in-memory preferences from the GUI, saving them to the
configuration file from the GUI, reloading from the file to the
in-memory preferences. Then, to add to the ducplication, when the
application was exiting, some fields were saved again.
Basically the first step and the last step were useless appart from
the fact the the other steps where missing a few fields here and there.
This patch removes the first step and fixes the missing fields.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
ACKed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we change the units we need to redraw the info on this pane.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a bit painful, but we basically walk the samples and pick the
valid tank from the events. And then we do a simple discrete integration
to figure out the mean depth per tank and duration per tank. And then we
assemble all that into per tank statistics.
Strangely the value calculated here seems slightly higher than one would
expect from the overall SAC rate. This inconsistency should be
investigated a bit further, but my guess it it's based on the assumption
that the DC provided mean depth is possibly more accurate than what we can
calculate from the profile.
Fixes #284
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to check for this whenever we do something that directly or
indirectly closes the data file. Previously we were missing the straight
"quit". Also, we should consistently check for both editing or dive
addition. And lastly, we should use consistent language with commit
0e9cd0944284 ("Make editing message consistent with button labels").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- Dive list no longer has messed up trip entries
- Dive list is now correctly marked as modified after trips are merged
- When data file is closed, the list of selected trips is cleared which
avoids a potential crash when loading a new data file
Fixes #286
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- Allow ssrf as a default log file suffix.
- Allow sde/dld/db as import log suffices (we don't use the LIBZIP
and SQLITE3 ifdefs anymore)
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was bugging me for a while. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Seems rather obvious to me - the language in the warning doesn't sound
very smooth, though.
Fixes #246
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #253.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
No need to add more code to Subsurface by bringing in std::string too.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Rewrite of the way we handle the last used directory for the loading /
saving of files.
we didn't reuse anything for the code, and that's error prone
and also dumb =p. Reworked that so we have a nice method
to help us out on that. lastUsedDir and updateLastUsedDir
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We remember what was selected before and restore it. Maybe there's a more
"Qt way" of doing this, but my implementation appears to work :-)
Also remove unconditional debug output that snuck into an earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This gives a more consistent and expected user experience.
Fixes #236
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We previously did did bad things when running with an empty configuration.
This attemps to clean it. We will now correctly handle the splitters in
almost all cases ( if I didn't break anything on the way. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This now offers the correct gases for which we have cylinders defined.
For both the planner and add dive we still don't end up with the correct
cylinders in the resulting dive. But that's for another commit to fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should leave the program in a consistent state after add dive was
cancelled (and do the right thing in case the dive list was empty).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The user could add a dive, and in the middle click on the 'plan'
button. Since we didn't cared about that on the widget, a lot of
inconsistencies could occour. this fixes that by setting a flag
on the Planner, that has now three modes: nothing, plan and add.
(maybe in the future an edit mode will be valid too.)
If in 'NOTHING' mode, user can enter the addition, edition and
planning. If in any other mode, user can't do a thing. The mode
gets back to NOTHING when user accepts or cancels a plan / add
/ edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a try: when the user changes the orientation on the columns
by clicking on the title of them and organizing by something that's
not the number, we lost track of the opened branches. this commit
doesn't fix that, but it fixes a possible similar issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
I got a bit lost trying to find the code that handled DiveList columns
today, so I thought it was better to move it to its file, after all we
do have a divelistview.h :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just proves one point: I'm retarded.
I moved some code around and forgot to close the old group, so I created a
group inside 'MainWindow' that handled the ListWidget, wich was not the
right thing to do at all.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I basically rewrote the way we handled the splitters. It now uses a state
to know what it's doing, and will only update the value of the
saved-to-disk splitter size if the state shows the splitters (currently
only VIEWALL), where all the other states should hide the splitters, and
the values of the splitters don't matter.
Fixes #225
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the model name is written into the XML file it has to be a literal
string that isn't translated. Otherwise a datafile written in one locale
behaves differently when opened by Subsurface under a different locale.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It should be 'now' in the current timezone.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should keep whatever view the user last used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch enables editing a dive that was manually entered,
it doesn't cover dive plans yet because on the plan I need to
figure out what are the 'user-entered' points, and what are
the algorithm point. and I feel lazy. =p
One last thing that's missing is to revert the dive to the
previous condition if the user cancels the edition, currently
canceling and applying ok is the same thing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
|
|
There's a method named refreshDisplay, fairly unused, let's
use it a bit mroe.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
|
|
Added a new option to edit the dive in the profile view. The option
will only be visible if the dive was manually entered or if the dive
is a plan.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
|
|
We cannot use tr("").toLocal8bit().constData(); on a function
that expects a char* because the object will be deleted on the
next line, so a strdup is necessary.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
|
|
This patch does the hooking up to show the dialog of the
divelogs.de window when the user selects it on the menu.:
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Created a WebService dialog that will handle download and upload
from all child based webservices. Also, ported the currently - only
- one webservice to use the new dialog.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Implement exporting in UDDF format as was done in Gtk version. File menu
exports all the dives, right click on selection exports the selected
ones.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This tracks the autogroup state remembered in data files. Toggling the
checkable menu item causes the divelist to be marked as changed. This
might actually be untrue - but that's really hard to track so this is the
"better safe than sorry" approach.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is really nice to have when looking at specific parts of a dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch implements GUI for importing CSV log files. One is able to
configure what columns contain time, depth and temperature fields.
Pre-configured log applications currently included are ADP log viewer
and XP5. (Both of these use actually tab as separator, so the field
separator currently hard-coded.)
[Dirk Hohndel: minor fixes]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This compiles and looks about right, but it doesn't appear to work, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Tomaz Canabrava
Dirk Hohndel
Taiane Ramos
Patrick Valsecchi
Henrik Brautaset Aronsen
Robert C. Helling
Thiago Macieira
Anton Lundin
Tomaz Canabrava
Miika Turkia