| Age | Commit message (Collapse) | Author |
|---|
|
When adding the method that includes the depth unit to the DiveItem class
I realized that this was yet another implementation of our depth unit
conversion. We should just call the existing helper instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Tweak font size and column widths.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
At least for my dives there wasn't enough space for depth and duration in
the header, most likely because I made the last two columns smaller to
create more space for tags and suit.
With this commit the depth and doration in the header now spans two
columns and easily fits.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And re-order / re-size the fields so more useful information is actually
shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
2-up and 6-up need different fonts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
use setPointSize instead of setPixelSize to make it device independent,
also reduced a bit the size of the font.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead always display the display_dive.
Now the only thing left to slay is the stagingDive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Qt Framework adds a visual 'tab' on the children of a
node, but if we forced a right alignment on them, it will
lose that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Spin boxes for pO2 are now hooked up to preference values. Adding new
cylinders (or changing their fo2) computes the MOD accordin to the current
value of decopo2. Note that chaning the limits for deco pO2 does _not_
automatically update the switch depth of all cylinders as those might have
been manually entered.
Furthermore, MOD has now to option of rounding to multiples of a given
depth. That is used for the automatic switch depth which are now always
multiples of 3m (so that EAN50 is switched to at 21m rather than 22m).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And fix the bug that in the info overlay SAC was always given in metric
values. And try to reduce the number of places in which we calculate the
unit conversions...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 125ddd955c04 ("Display liters with script el") Robert only fixed
the C routine we use to show units. Strangely, we had a separately
implemented C++ function as well. Instead of implementing this in two
spots I now simply have the C++ function use the C function to do the
actual work and then wrap this into an easier to use (from UI code)
QString output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we avoid trying to create a dive from the plan while the plan
references the cylinder that has just been changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When removing o2 from a gas, eg setting it to "", air, this code would
raise a nice fpe. Fix that by using gas_mod instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I keep trying to get to consistenct.
Completely hopeless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In bf205726 DEPTH/Switch at was disabled by commenting out that code.
This puts it back behind ifdefs
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We always checked if the tank was in use by the planner / dive editor -
even if we were not in dive edit mode.
With this patch, when not in dive edit mode, we check our cylinder "used"
flag instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
clang-format doesn't appear to reindent multi line #define statements
correctly - so this hopefully will clean those up.
The included whitespace corrections to the code should stay in place when
using the updated tool.
This includes cleaning up some multi-line comments that were messed up the
last time around as well as a few other minor changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I'm not sure about this one. It's possible that there's something
happening behind the scenes that I don't understand. But let's just
initialize this to 0 and be sure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The coding style for switch isn't the prettiest, but let's at least keep
things consistent.
Also, those ugly break statements never got reached, anyway.
And there was no need to re-declare and re-generate currentString.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the planner is disabled this column isn't needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Memory leaks were caused by broken parent/child relations.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There are at least two scenarios where our old code was flat out wrong.
If you manually add a cylinder (because you may want to switch to it in
the profile), then at least until the next time you restart Subsurface
this cylinder should be shown.
Also, when you switch to a cylinder by adding a gas switch event on the
profile, that change should then make that cylinder visible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I had problems with this one on Qt5.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some dive computers will always download all tanks that they store, not
just the ones used in a dive. Most people only want to see the tanks that
they actually used during the dive (and for the others there's an option
to go back to the old behavior, just in case).
All this is only in memory / during runtime. If the dive computer provided
the extra data we will not throw it away.
Fixes #373
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now never remove units or percentage signs, and always just compare
the string data, so we should remove the hacky arguments that are no
longer used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This matches the pattern of unit conversion, and will allow us to remove
all the code that uses the old complex "CHANGED()" macro that tries to
remove units or percent signs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Whittling down on the string parsing that doesn't check user-specified
units. Still need to handle temperatures (and will do percentages to
match the pattern too), but this is getting us closer to always honoring
user-specified units.
With this you can say that you have a "10l" cylinder at "3000psi", and
it will do the right thing (it's basically a 72 cuft cylinder in
imperial measurements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This just adds (and uses) a string_to_pressure() to parse pressure units
correctly when filling in cylinder pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's currently only used for the setting of the cylinder switching
depth, but now that one should work with user-specified units (so you
can set a max depth in feet even if you use metric, and vice versa).
In the future, if we also make the unit preferences something you can
pass in (with user preferences as a default argument value), we might
want to use this for parsing the XML too, so that we'd honor explicit
units in the XML strings. But the XML input unit preferences are not
necessarily at all the same as the user preferences, so that does
require us to extend the conversion functions to do possibly explicit
unit preference selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make it use 'weight_t' and hide the "grams" part inside the type. That
was the whole point of the weight_t type, after all. Returning a
"double" was always bogus, since we internally always do integer grams
(and the function actually used "rint()" to get all the rounding right
anyway).
As a result, it's now called "string_to_weight()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Tomaz Canabrava
Tim Wootton
Lubomir I. Ivanov
Robert C. Helling
Henrik Brautaset Aronsen
Anton Lundin
Tomaz Canabrava
Robert Helling
Boris Barbulovski
Linus Torvalds