| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make the columns on Cylinders edit and Wheight Edit to
have sane values for 'type', this is needed because the
old behavior was to set it fixed size, and the default fixed
size was silly. this calculates a good predefined value
taking the font size in consideration.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Better handling of default sizes on the Cylinder and weight widgets,
the weigth widget didn't had a CSS applied so it looked odd compared
to the cylinder one, also the default behavior for the combobox delegate
didn't worked very well with the css applied, being too small.
this patch fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The models were a bit messy - some of them got the correct font,
other didnt. This patch creates a new function 'defaultModelFont()'
that is being used to return the font in all cases now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The Qt branch didn't set the preexisting dive count, so matching old
dives didn't work and it always downloaded all of them.
Also, we need to autogroup dives before displaying them if autogrouping
is on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Implements the divelist to behave like linus explained,
essentially, it filters the layoutChanges of the model,
greps for trips, and for each trip that it finds, it set
the 'firstColumnSpanned' property, to make the column
to have the size of the whole table. e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
We were doing integer math by mistake.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Ok, so this sounds insane, but it fixes our currently broken sorting
of dive trips vs plain dives not in trips.
The reason for that is simple: the dive trips are sorted by date, but
that's column #0, and for plain dives is the dive number.
So currently the trip-vs-dive sorting looks at the date of the trip,
and compares that to the number of the dive. Since the date of the
trip is expressed as seconds-since-1970-in-UTC, unsurprisingly the
dive number is generally much smaller (even for some very avid divers
;), and so the plain dives end up sorting way at the bottom (or at the
top, if you do "oldest trips first"
Since the dive number *should* sort as the date, this stupid attached
patch just makes us return the dive date instead.
Now, there are other possible solutions to this:
- make the date of the dive be column 0, and make the dive number be column 1.
Quite frankly, while more logical for this particular problem, it
probably sucks as a solution. We do want to have a column we can sort
dives by that is date-based, but doesn't include trips. And while the
dive number *should* sort identically to the date one, the fact is
that you can have dives without any numbering, so it doesn't.
In contrast, all dives have dates, and sorting numbered dives by
date should still result in sane behavior (and if it doesn't, then the
insanity comes from the dive numbering, and odd sorting is the fault
of the user and indicative of a problem)
- We could possibly do something magical like sorting dives by number
when they are inside trips, or when no trips exist at all. But then
we'd sort by date when there are trips and the dive is outside the
trip. But quite frankly, that just sounds insane.
So on the whole, I don't love this patch, but it seems to be the least
confusing of the possibilities.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Added the code to remove a dive computer, plus a few fixes
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
This edit dive computers thing doesn't really need buttons anyway.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The GTK version seems to be bugged on this, since the dialog
doesn't save the dive computer nickname that I setted, but
the Qt version shows less dive-computers than the GTK one on the
same dive. I want somebody to do a quick review of my code too. :)
I also plan to remove the 'OK' and 'Cancel' buttom, they seem to
be overrated on this dialog - fairly uneeded.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Created a new dialog, Edit Divecomputer, it will currently only lists
the divecomputers that are used on the xml file. I used the same method
that the gtk version used, but only 2 divecomputers got visualized in the
dirk dive data. I'll assume that it's correct and will fix it in the next
couple of commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
In commit beb4ed38f264 ("Add a "sort role" for sorting the dive list")
Linus forgot to add a case for the rating value.
Now all columns sort correctly.
With this I think we can close the bug...
Fixes #111
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Tomaz convinced me (with help from Linus) that it might be a good idea
to go with the compacter "single line" case statements in some specific
instances where this makes the code much more compact and easier to
read.
While doing that I changed Linus' code to do 'retVal = ...; break;'
instead of just 'return ...;' - this is more consistent and makes
debugging a little easier.
And while doing all that, I also cleaned up divelistview.cpp a little bit.
And removed an unused variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By default, sorting is done by the display role, but then we end up
sorting by the string we display, which is almost always the wrong thing.
So this adds a new "SORT_ROLE" that is used for sorting, and then the
data lookup can return the raw data we want to sort by.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This code adds the possibility to make the DiveList behave
like a Tree or a List, depending on what layout is set.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
My attempts to actually set the width of the columns with the
SizeHintRole all failed - so I gave up on that and am forcing things to
work by making the texts in the header somewhat longer and then resizing
to that. Definitely not what I wanted to do - but that plus reducing the
font size gives us a much more reasonable / compact look.
I really hope that someone else can explain to me how to get the
SizeHintRole to affect the width (and not just the height - that part
worked just fine) of a the cells in a column. Then we can replace this
hack by a much better solution (that won't fail if the translated strings
look different).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This commit fixes three different things:
- a memory leak in WeightModel::setData()
- getSetting() calling strdup() on a QByteArray
- a possible usage of memory after deallocation
Here's an explanation of the last issue (taken from the mailing list, slightly
adapted):
toByteArray(), as well as others "toSomething()" methods, returns
a new object which the compiler allocates on the stack. The compiler
will consider it a temporary data, and destroy it on the next line. So,
when one does
char *text= value.toByteArray().data(); // line 1
if (strcmp(description, text)) { // line 2
the compiler creates a QByteArray on line 1, calls ::data() on it, which
returns a valid char *, and assigns its value to "text". So far, so
good. But before jumping to line 2, the compiler destroys the temporary
QByteArray, and this will in turn invoke the QByteArray destructor,
which will destroy the internal data. The result is that on line 2,
"text" will point to some memory which has already been freed.
One solution is to store a copy of the temporary QByteArray into a local
variable: the compiler will still destroy the temporary QByteArray it created,
but (thanks to the reference-counted data sharing built in QByteArray) now the
destructor will see that the data is referenced by another instance of
QByteArray (the local variable "ba") and will not free the internal data.
In this way, the internal data will be available until the local variable is
destroyed, which will happen at the end of the {} block where it is defined.
Please note that when one uses the data in the same line, one doesn't need to
worry about this issue. In fact,
text = strdup(value.toString().toUtf8().data());
works just fine.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now detect if a weight / cylinder with this description exists and if
not add it on the fly. We also remember the additional values (weight and
size / workingpressure) for new entries and take the values for these
fields into account when autocompleting.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is very much analogous to the way cylinders are implemented.
That means that just like with cylinders, if the user enters a new type
and hits 'tab' before hitting 'enter', Subsurface will crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having the tank_info declared in models.cpp seemed unintuitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this we should have tank editing mostly done.
See #122
(it's not quite fixed, we need the equivalent code for weight systems)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I had to immprove the TankInfoModel with two new methods,
insertRows and setData, because the delegate used this
model to show what kind of Tanks we are offering.
Since the user can enter a new type of Tank, it's important
to add this tank to all lists using the delegates.
I Also added two new methods on the delegate itself,
to correctly shows the data, and set the data on the
model. This also will help dirk with a working example
on how to edit things while using a delegate.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
I just need to write a tool that does this...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Prevent a crash when no cylinder type description is set.
Correctly calculate the cylinder volume.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The UI had only stubbed this code out. This adds the implementation of the
helpers and calls them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds basic editing functionality for Cylinders and Weigthsystems,
it still doesn't use delegates to show the data to the user in a better
way, and it does not take in consideration user preferences yet, but
it's a starting point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
So, the Cylinders and Weigthsystems got a new Trash icon,
and the interface already intercepts the clicks ( on all
columns ) and send this to the 'remove' method on boch
models. On the model I'm just filtering the indexes that
are not 'DELETE' and creating a stub method to be filled
later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Make use of all the nice helpers that we have...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Plus a couple of minor formatting changes
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds support showing and for editing weigthsystems in the equipment tab,
so, now the two things that are missing are 'edit' and 'delete', wich are quite easy to do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
i
Added the code to show the cylinders from a dive,
this code also already permits additions from the
interface, so the user can click 'add' and insert
what he wants there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
This makes the DiveList be similiar to the GTK one, comparing
the size of the text. The current code makes text on the
table be 30% smaller.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
The weight management widget added 500 grams / 0.5 lbs
when a new entry was added.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A nonexisting temperature (mkelvin==0) was displayed as -273°C.
Weight was always displayed with an extra 500 grams/0.5 lbs.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Cosmetic commit to clean up some of the annoying typos in qt-ui
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And rip out all the code that Dirk put there to do that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A left click in the treeview header leads to a call to createIndex which
results in a null pointer dereference.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Establish some useful helpers and use them when updating the values.
One of the helpers (from statistics.c) puzzlingly doesn't link - so that's
ifdefed out.
Also had to re-arrange the settings reading code (it came too late) and to
extract the expanding code of the top dive from the settings reading code
(as it had no business being there to begin with).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Tomaz' code does a much better job of shading the dive list!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a test and I shouldn't be taken seriously.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was written with massive hand-holding by Tomaz - actually, this was
mostly proposed via IRC by Tomaz and then implemented by me...
Right now because of the list-of-lists nature of the model we have the
small issue that every trip starts with a dark background dive, even if
the trip itself has a dark background.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Tomaz Canabrava
Linus Torvalds
Alberto Mardegan
Henrik Brautaset Aronsen
Amit Chaudhuri