| Age | Commit message (Collapse) | Author |
|---|
|
Same problem as the previous commit: toStdString() returns a temporary,
and c_str() will return a pointer to internal data, freed at the end of
the statement. So get the pointer to be strcpy'ed in the same statement.
Changed to toUtf8() to be more explicit about the encoding and to avoid
std::string
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I we are showing a calculated ceiling, then we have to replot the profile
after a preferences change as the gradient factors could have changed
which might change a calculated ceiling.
Also use the rulergraph preference instead of checking the settings
directly.
Fixes #511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit bcdd6192fe45 ("Show translated event names in tooltip") I was
too aggressive in replacing the checking for event names with checking for
event types. It turns out that we are abusing an existing event type in
the planner (and use a different event name to mark the difference). By
just checking for the type this now caused incorrect information to be
displayed in the info box (a simply "PO2 warning" on a Suunto D9 could
turn into a "Bailing out to OC" notice).
The correct fix is to get our own range of SAMPLE_EVENT_xxx numbers from
libdivecomputer. Once we have those, we can do this the right way. For now
we just fall back to also checking the event name (which is what I wanted
to get away from so translated names don't trip us up).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The "is_air()" test works when we have the gases in permille, but not in
percent. In that case we can just check for He == 0 and O2 == 21.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order for this to work we need to compare against the event type
instead of the event name - which makes much more sense to do, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having all the grid lines in the same color made things visually
confusing. To clean this up a little make the heartrate lines a light gray
color.
Fixes #484
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems like a rather obvious optimization...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code for toggling the DC reported ceiling in red or "surface
color" clearly had never been tested.
This seems to create a reasonably attractive implementation - not exactly
what we had in the past, but good enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After adding the animation member in the preference struct, it is
very resonable to change these references of QSettings to the
preference structure instead.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes #485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The lettering of the heart rate numbers on the lefthand exis "fall off"
the left hand of the profile panel when the panel is a bit narrow. This
minute change moves the letters a bit closer to the Y-axis so that their
left-hand extreme is more or less in line with those of the depth-labels
on the Y-axis. This is a partial response to Ticket # 484.
See #484
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add the option to edit the name of a bookmark to be more meaningful for
the user they prefer.
It works just as simple bookmarks and can be removed and hidden.
It won't accept names longer than 22 characters because longer names will
display as garbage text.
Also changed the code from displaying flag depending on event name to
depending on event type.
Signed-off-by: Yousef Hamza <jo.adama.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add additional check box in "preferences->graph" section that allows
users to hide average depth on dive profile.
By default this option is checked to show average depth.
Fixes #475
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
getColor() has a default argument for grayscale set to false.
With this patch we pass it the local isGrayscale flag, which
can only be set during printing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some flags like printMode and isGrayscale are missing yet needed.
The flag printMode is required so that we know *when* to hide
certain elements such as the ruler and tool tip (e.g. not needed
while printing).
isGrayscale should be passed to all getColor() calls, so that
the greyscale color table is respected.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The ruler text's white background scales badly. This patch
adds the ItemIgnoresTransformations for the textItemBack
object and matches the dimensions and position of the
textItem object in front of it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Repaint ruler when enable/disabling it.
Straightforward replot() added.
Fixes #479
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Changeset a90818671 introduces a small inconvenience. The pp graphs at
startup are not shown according to the visibility settings. Requiring to
toggle the icons to show the desired pp graph.
Trivial fix.
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Hugle <wulong@comp.nus.edu.sg>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should make the layout work better on smaller screens.
Fixes #458
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The only place on the code that the y() position didn't accompanied the
dive-depth was this one, so let's see if this patch fixes it.
See #455
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Qt5 uses different widths for some of the poly. lines
in the profile. Setting an explicit value fixes that.
Tested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
display.h: dc_number is unsigned int, thus a couple of warnings
may pop-out.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After the dive log has been closed, the ProfileWidget2 does not clear
the pn2 po2 and ph2 gas line.
This patch cleared the three lines after dive log closed.
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Hugle <wulong@comp.nus.edu.sg>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes #464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I had intended to amend the previous commit with this before pushing it
out. This changes the comment that pointed out the bug that the previous
commit fixed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Turns out we unconditionally set all events as visible when redrawing the
dive - even with a comment that this should take into account if the event
is visible. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This got lost when we switched to the new profile.
Remove event works. Hide events does call hide() on the DiveEventItem but
for some reason it stays visible. I'll hope for one of the more
experienced Qt people to fix that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Especially in O2 decompression parts of a dive, the pp02 is typically very
close to the threshold value (normally 1.60 bar). The old implementation
of the pp profile graphs assumes that there is exacty 1 consecutive set of
samples that needs to be in the "warning color". This results in an
erroneous display of the mentioned graphs, connecting multiple episodes of
too high pp with bogus lines in between.
This fix generalizes the pp graph logic to allow for multiple segments of
high pp, each to been drawn seperately in the "warning color".
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By simply storing the coordinates based on the scene (instead of trying to
map them to real coordinates) the overlay position is correctly restored.
Also remove the redundant positioning before readPos is called.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The topmost Z order of items in the profile should be:
- background (poster / logo)
- toolTipItem
- rulerItem
...
This mostly fixes the ruler being under other elements.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A couple of problems with the ruler:
- the rotated text doesn't look very well at all and interpolation doesn't
help it much
- measuring towards the right most part of the profile makes the text go
out of the screen
To solve these issues and attempt to improve the ruler this patch does the
following:
- place the text at the bottom of the lowest of the start and end points.
this way the line will never intersect with the text
- clamp the x position, so that the text doesn't ever leave the screen
horizontally
- place a white background behind the text so that it will cover text and
graphics under the ruler item
(TODO: place the ruler on top of everything else)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The animation appeared when the user started subsurface with a default
file, wich was a little annoying since it didn't had a 'from' position
to go and it was also increasing it's size on some window managers
that do subtle windows animations when a program starts. This patch
treats the first dive opened when the program loads with a divelog pa
rameter differently as the following ones storing the velocity value
on a temporary, and reassigning it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
User can now fine-tune the animation speed on the preferences,
a value of zero disables it completely.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is very userfull for a ( yet to be implemented )
preference dialog about the animation speed, so the
user can enable / disable the animations or make it a bit
faster for it's taste.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Once the poster is displayed when there are no dives in the list,
we may also want to disable the QToolButtons (PO2, SAC, etc..),
until a new dive is loaded and the profile is redrawn.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user has zoomed in but then changes to a new dive,
we may want to reset the scale back to the original value (1.0)
based on the current zoomLevel, so that the profile is not stuck
in zoomed mode.
This patch adds a snippet that resets the QGraphicsView scale,
zoomLevel variable and also the toolTip position.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds a new image resource named poster.png which,
is shown instead of the 3 posters. The main reason for that
is due to the poster text not being visible. This new image
is pretty much the Subsurface logo only.
It also removes the grid lines, while the poster is visible.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Such can be disabled with -Wno-reorder and are clearly
more of a nuisance, but C++98 12.6.2.5 says the order should be
the same as in the class declaration.
On theory this would only speed the compile times a tiny amount.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We had all in place, all that was missing was to actually load
the position stored on the settings for the tooltips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This code cleanup fixes the two issues that I raised on
my last e-mail. hurrah.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is just removal of dead code from the old profile, probably there's
still a bit more to remove, but this is a very good cleanup already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The ruler is a weird beast - it has two child objects that access the
parent to call another function, that call the child functions.
When I updated the plot_info I didn't take that into consideration, what
happened is that when I set the parent's plot_info, the children's
plot_info are still invalid, but the update method is called anyhow.
This patch updates all plot_info's before calling anything else.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Minor change to the perl postprocessing script and resulting changes to
the affected source files.
This deals with two issues:
- "foreach"-like structures were not always treated correctly
- some longer calculations that ended on "+ constant" were reformatted in
a rather unatractive manner
In one source file (divelist.c) I ended up adding braces to the sources...
trying to cascade the indentation further down without having the block
there seemed a lot more trouble than it's worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #445
Signed-off-by: Gopichand Paturi <gopichandpaturi@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Thiago Macieira
Dirk Hohndel
Gehad Elrobey
Lakshman
Willem Ferguson
Yosef Hamza
Lubomir I. Ivanov
Jan Mulder
Hugle
Tomaz Canabrava
Linus Torvalds
Gopichand Paturi