| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 31d1d1f4217c ("Don't change pen color when for zero SAC") Robert
continues to use the last SAC color (which certainly was better than
switching to dark green for "extremely low SAC rate"). But I think it
makes even more sense to mark it as neutral - so I picked a gray.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When for individual plot entries the SAC is zero this comes
from gas changes and the SAC calculation needing a bit more
pressure data and not from the diver switching to freediving
mode. So we shold not change the pen color on the pressure
line for that but pretend we are still breathing at the
previous SAC.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
On OSX and Linux only, the cosmetic width of the QPen
on profile axes does not work and is weirdly dependent on the
fact if a printer is installed or not. Possible Qt bugs at hand.
The same is not present on Win32.
To solve the issues we add setPrintMode() in DiveCartesianAxis
and call it for all instances of the class in ProfileWidget2.
This patch also moves gridPen() as a private member function
of PartialGasPressureAxis as it now needs to access member
variables.
Fixes #943
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
resetZoom() is now a new method that is called both
when 'printMode' is updated or when the dive is re-plotted.
Fixes a bug where zooming in on the profile and then
printing the dive has the profile at the wrong zoom level (makes
the profile look smaller).
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #912
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the whole idea of calling these functions through the MainWindow
instance is atrocious, until we change the architecture of all this
refreshProfile() is a useful function to have.
In order to make this cleaner to implement I allowed an argument to
ProfileWidget's replot() which allows picking a specific dive. By
defaulting this to 0 we get the previous behavior when calling replot()
without an argument.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After a replot, check if there is an error message to display.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While printing only draw headings, SP changes, gas events or bookmark
events, otherwise don't show anything.
Many warning logos can hide the useful information especially in
templates with small dive profile area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
|
|
When switching from one DC to the next, the text of DC name is not updated due
to commit 487ddce3531f6b738affc84edf066bd0ea4a16bb. This patch re-inserts the
call to updateText() for the specific function to get the DC name updated
properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We really shouldn't need to connect to the MainWindow in order to get the
right scale for the fonts when printing. While printing likely will remain
a desktop only function, this is just bad design. And making calls like
this from the paint() function is a bad plan, anyway.
So instead we make sure that every DiveTextItem knows what the printScale
was when it was created (or actually, when the text was first set as they
frequently get created before we have a scene which we use to get to the
profile), and gets updated whenever that scale changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We had all this wonderful code to scale the text correctly, except we went
out of our way to make sure the code wouldn't be called unless something
changed on this specific text item. But that's bogus because the scaling
depends on external factors like the fontPrintScale.
So instead of calling updateText() when attributes of this DiveTextItem
change simply call it right before the DiveTextItem gets painted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having it as part of the DiveCalculatedCeiling class caused us to manage
this text 17 times (and plotting it 17 times) which is rather silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We want to test the string instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Or... this code doesn't do what you think it does.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now that plotInfo.nr will always be positive. Still, this is cheap and
shuts up the "defect".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I think with this one I'm finished.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This class will surely be used on the mobile version, and it was very
tangled inside divepicturewidget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is to avoid visual clutter when replanning logged dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now the way to edit the profile of a manually added dive is really
counterintuitive: you have to first make some random change to the dive
information, then the profile switches in to editing mode.
This commit adds a simple context menu entry on the profile that is only
shown when the a manually added dive is displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes #840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The current code is dereferencing the null pointer 'profWidget'.
It can cause a segmentation fault.
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
profilewidget2.cpp:1398:25: warning: the omitted middle operand in
?: will always be 'true', suggest explicit middle operand [-Wparentheses]
profilewidget2.cpp:1403:39: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Points (handles) from the last dive ADD operation remain on
the profile unless we clear them.
fixes #846
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The point graphics are allocated but doens't seem to be
deleted anywhere. We attempt to fix that in clearHandlers().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Given that we might be adding a gas change event at t = 0 we need to check
for both that and t = time_or_first_sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
t = 0 isn't really special here. We shouldn't allow two gas changes at the
same time, period.
We also can do away with the special handling to mark the dive list
changed and replot things if a gas change gets removed. That's done at the
end of this function either way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove the existing gas change events @0:00 when new
one is added @0:00.
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When zoomed in, things like moving planner points is not possible,
but if the user attempts that, replan() -> plotDive() is called
and the zoomLevel should be reset to the default value (we don't
really want that), but instead it's lost for some reason
(as the user reports: "Somes times, it changes to 100% which is ok").
If moving points becomes possible eventually while zoomed in,
we need to figure a way to replot without resetting the zoom level
in plotDive().
Fixes #851
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Showing an Error message is better called from the Notification Object,
So for consistency old references to showError is replaced by calling
the notification object.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old way of creating the mainwindow made things a bit
dependent of the order of initialization, and we don't
assume that anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is the last patch in the series of clearing up the
mainwindo.ui. Now to bugfixing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It is now in mainwindo.cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now it's created in the mainwindow.cpp as part of the new
way to configure the interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While this text makes sense if this is a CCR dive and the diver does bail
out, the more neutral text "Manual switch to OC" works in all use cases
for this event, e.g. at the beginning of a dive when we manually set this
dive to be OC.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When using that to indicate the dive type at the start of the dive, it's
visually strange to have an event marker.
See #826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch cleans up code for achieving the above with respect to
CCR dives. The code is simplified and shortened. The display of
gas lables on the profile is made consistent with the cylinder
pressure closest to the graph and the gas composition above/below
the cylinder pressure. The patch significantly improves the
maintainability of this code.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of inventing another way to do this (and inevitably forgetting a
path where this should be re-enabled) I renamed the DcShortcup related
function and made them enable/disable the copy and paste shortcuts as
well.
Of course there now is one exception (isn't there always?): in "ADD" state
we don't want to be able to switch DCs, but we do want to be able to
paste.
Fixes #825
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead add a new define SHOW_PLOT_INFO_TABLE that triggers if this
debugging aid is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Without this patch, the user effectively cannot change the dive mode as
any change is overwritten by replot copying current_dive over
displayed_dive. The way out is not to call replot but only update the deco
ceiling directly.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
probably just a typo; taking the value of a (char *) will return
the first char (or byte).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we have a dive with no data (e.g. from a failed import), we might never
assign a value otherwise.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add a tiny bit of white space to the left and display the unit as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Robert C. Helling
Lubomir I. Ivanov
pestophagous
Gehad elrobey
Miika Turkia
Tomaz Canabrava
Marcos CARDINOT
Yousef Hamza
willem ferguson