| Age | Commit message (Collapse) | Author |
|---|
|
Since we have now destkop and mobile versions, 'qt-ui' was a very
poor name choice for a folder that contains only destkop-enabled
widgets.
Also, move the graphicsview-common.h/cpp to subsurface-core because
it doesn't depend on qgraphicsview, it merely implements all the
colors that we use throughout Subsurface, and we will use colors on both
desktop and mobile versions
Same thing applies for metrics.h/cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This isn't perfect (if you make multiple requests things could go badly),
but it's better than just slapping the new password into the settings,
even if the update failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This now allows the user to set a new password for the cloud service.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This isn't UI related and shouldn't have been in a file full of UI
functionality.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Correctly tracking the status of our authentication with the cloud service
is non-trivial, especially since the user may quit Subsurface between
registering and verifying an account, they might even register on one
machine and verify on another.
This tries to make sure that when in doubt we check with the cloud service
backend. And we show errors in the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
libgit2 takes forever (a minute or so) to figure out that it can't connect
to a remote server.
So if we are using https as connection protocol, quickly check utilizing
RFCs 2324/7168 to make sure we can reach the cloud server (and not some
captive portal or something).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This triggers when the email address / password is changed in the
preferences. It opens an https connection with the backend server (the URL
is hardcoded) which should create an account with these credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When accessing websites (divelogs.de, subsurface website) we shouldn't
pretend to be Mozilla 5.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The access manager is only one, while we can make requests from
different parts of the application, so relying on the manager
finished() signal to see if something was done or not was a
not very good move.
The QNetworkReply is created when a get() is invocked on the
AccessManager and that's unique. connect it's finished()
signal instead.
bonus: code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Strangely no problems on Qt5 without those declarations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This switches the QTextEdit fields to QPlainTextEdit (I don't see a reason
why we should allow HTML here), no longer tries to have a default text but
instead adds labels for the two fields, connects the UI so th data is
collected and uses a bastardized WebServices subclass to send the data to
our backend.
Fixes #546
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As our menus are getting many export entries, it is better to create a
single export dialog where user is able to select the export type and
whether to export selected dives or all of them. This should also be
more intuitive than the current way when export from file menu export
all dives and right click menu on divelist exports only selected dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The userid of Subsurface Webservice can be included in locally saved xml
files and git repository.
For xml files, it is stored in userid tag. For git repo, it is stored
in 00-Subsurface file present in the repo.
Preference dialog and webservice dialog modified to include option
for saving userid locally.
In case of difference in default userid and userid in local file,
some semantics are followed. These can be referred to here:
http://lists.hohndel.org/pipermail/subsurface/2014-April/011422.html
Fixes #473
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
* Remove statuic SubsurfaceWebServices::instance() member.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is so we can mark the error messages for translation.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Post downloading we have an 'Apply' button that can be clicked
to apply/merge the downloaded dives. When uploading we
rename the button to 'Done' and enable the button if the
upload was successful. The 'Cancel' button on the other hand
becomes disabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This implements support for:
* uploading a zip file containing dives - untested
(the zip file must have been prepared elsewhere)
* downloading the dive list and the dive XML files
The networking part is finished, but it's missing the actual import of
the XML files sent by divelogs.de.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
The time out is 30 seconds from the start of the request or from the
last time we got any data from the server.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
QNetworkReply might emit signals after it's been told to go away. We
don't want to change the status after that.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Re-enable buttons that should be enabled by default, disable the others,
set the status to empty, make the progress bar go back to zero.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
One of the rules of using QNetworkAccessManager is to share it among all
users, since sockets and other state can be shared. Looks like Marble
doesn't allow us to set it, though, and it creates multiple instances.
I'll prepare an upstream patch to fix that sometime.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Added the skeleton code for the Download / Upload from Divelogs.
de webservice. Now I need to hoopup things from the .ui side and
do the actual implementation of the code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Created a WebService dialog that will handle download and upload
from all child based webservices. Also, ported the currently - only
- one webservice to use the new dialog.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The XML is now being correctly parsed, Clicking on Help
will open the browser pointing to the api site, and clicking
on cancel will cancel the download.
Clicking on Apply still doesn't apply, but that's next. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
|
Added initial support for download dive info from subsurface web service,
the current code only downloads and output the xml downloaded in the debug
area. Now I need to parse things up and plug the unplugged stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
|
Tomaz Canabrava
Dirk Hohndel
Miika Turkia
Venkatesh Shukla
Linus Torvalds
Boris Barbulovski
Thiago Macieira
Lubomir I. Ivanov
Tomaz Canabrava