| Age | Commit message (Collapse) | Author |
|---|
|
As a side effect this changes the signature of plan(): Before it
returned an int that was supposed to be possibly an error but
we never bothered to check it. So now it's bool indicating if the
planner did add stops.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The initial selection change signal seems to potentially be sent
before the listview is even visible when we do the first "scrollTo()"
to the currently selected dive.
That, in turn, seems to result in that when the listview is actually
shown, it will be scroll the trip description off the visible area,
and force the current dive to be shown at the very top of the
divelist. Which is not very nice: we do want to scroll to the current
dive, but we don't want to hide the current trip in the process.
Ignoring the selection change if the listview isn't even visible seems
to fix things for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes Collapse All only visible when its needed, and it
also fixes a crash when invocking collapse all when there was
nothing to collapse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch unclutter the menu by hidding collapse all
when all dives are collapsed, and expand all when all
dives are expanded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes Subsurface usable faster for those without a good internet
connection when they are opening an older data file.
While parsing, we are only feeding an vector of locations, after the
parsing is done, we traverse the vector searching for the information on
the web.
I need to also add a way to stop if there`s no internet connection - but
this will be another patch.
Also, fixed two small memory leaks from the old imp.
[Dirk Hohndel: cleaned up the whitespace mess]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... but discard an old disclaimer and runtime table if present.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is to avoid visual clutter when replanning logged dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If there are more than 100 samples, average some of them so we end up with no more than 100.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By wrapping the Location label in a layout as well they now all look
aligned again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of writing each dive out to a file and reading that file back in,
let's just use the internal helper function that places the dive as XML
into a membuffer.
So much simpler, so much faster.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Previously we simply failed silently without showing the user any
indication that something went wrong. That seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This disables planner UI elements in recreational mode that have no function
in that mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Dive context menu:
After the addition of the item "Add image(s) from web" the item
immediately above is "Add images". It is proper to specify now:
"Add image(s) from file(s)" to make the distinction clear. I also
change "Shift times" to "Shift dive times".
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a new divelist context menu entry which asks for a URL. The file
is retrieved and if it is an image it is added to the cache and the url
is associated to dives as with local files.
NB this currently only works with URLs pointing directly to images. But it
should not be too hard to add the possibility to add a direction via an html
file and its image tags.
To test: open dives/test43.xml and delete the image and then add the URL
http://euve10195.vserver.de/~robert/wreck.jpg
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use more explicit variabel names and make the get timestamp function actually
return the timestamp rather than getting a pointer argument
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #853
[Dirk Hohndel: fixed test compile]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now the way to edit the profile of a manually added dive is really
counterintuitive: you have to first make some random change to the dive
information, then the profile switches in to editing mode.
This commit adds a simple context menu entry on the profile that is only
shown when the a manually added dive is displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
XSLT conversions create V2 XML files, but we shouldn't abort when we parse
those without having the user informed about the potential slowness - all
XSLT based imports are slow, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Oops, that was embarrassing. Just setting it on displayed_dive doesn't
gain us anything if it isn't transferred to the selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We assumed that a trip was selected when all of its dives were selected
instead of just remembering if the trip itself was selected. I'm sure
there was a reason for that but I cannot think of any. But a side effect
is that if you have a trip with only one dive in it and have that one dive
selected and edit it, after saving your changes you end up on the trip
(which is now also selected) and are no longer on the dive. And that seems
quite wrong.
The new code simply remembers that the trip was selected. And selects it
again if it was.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add the functionality to undo/redo removing of dives from trips. The
code calling remove_dive_from_trip has moved to the UndoCommands class.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Planned dives must be replanned while manually added dives must be edited.
Show error messages to handle wrong user input.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With the addition of gas reserves in recreational mode
we need to make sure that the first leg is short enough
that we have more gas left than the specified reserve
even when using small cylinders like LP72.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
OSTCTools is a windows based software by Robert Angeymar which performs
configuration upgrade, memory analysis and download tasks for H&W OSTC
devices.
Downloaded dives are stored in files (one archive each) with the raw
binary data heavily padded at the begining of the file, and some other
data not included in H&W dive header protocol as the device's serial
number.
The import function simply takes the raw data part of the file and lets
libdivecomputer do the parseing.
Then adds some additional info as OSTC reported dive number and serial
device number.
Please note that OSTCTools is *not* a real logging software, it simply
gets the DC raw data, so there isn't any information about dive site,
equipment and so.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes #840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
...it had become blocking with 1e3700c1
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Once a manually added dive is part of a trip and this trip
is edited, applying the modifications leaves the dive profile
in edit mode (e.g. points can be dragged and gas swapping can
be applied).
The issue can be viewed from another angle. Why enable
profile edits of a manually added dive which is in a trip,
while the trip is being edited in the first place?
If there are more than one manually added dives in said trip
we are enabled to edit one of the dive but probably
it's not intended to modify all manually added dives after the
changes are applied for the trip.
This patch disables the functionality in question and it also...
Fixes #864
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
once the manual added dive is added it can't be edited directly, This
can be fixed by adding an edit button to the log menu, this will be
consistent with the plan/replan buttons.
Fixes #847
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds to the prefs struct the variables last_stop, verbatim_plan,
display_runtime, display_duration, and display_transitions from the
planner so their values are saved from one session to the next.
The widgets for some of those settings had default values in
plannerSettings.ui; remove them since the new code in
subsurfacestartup.c takes care of initializing them.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
initialize member 'anyChecked' in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Non-static class member recalc is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Non-static class member multipart is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This add support for Seabear's new import format that is used by H3 and
T1. In the future also the Hudc should switch to the new format. The
main difference to the old one is that time stamps are no longer
recorded in the samples, but intervali is specified in the header.
The header contains other useful information as well that we should
build support for. E.g. surface pressure, gas mixes, GF, and mode might
be useful additions later on.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When an user opened the "Save as" dialog and pressed the
cancel button a null string was returned. Therefore the
file_save_as function returned an error which was lately
shown when the file_save function was called.
Now the function checks if the cancel/exit button was
pressed and returns.
Fixes #844
Reported-by: longjohnsilver
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
obscure the first dive in the list.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
test case:
1 - make sure that you DO NOT have anything selected on the 'Dive list;
2 - in the menu bar, click on 'Log'->'Re-plan dive';
3 - crash!
Fixes #858
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The current code is dereferencing the null pointer 'profWidget'.
It can cause a segmentation fault.
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Even that most (or all) tables have the remove button at the section 0, the method defaultColumnWidth should not assume that it will always be true.
This patch will consider the title width of each section, instead of using a static width (which cause problems when the language is not en).
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Torstein Husebø <torstein@huseboe.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Implements a uniform variable naming scheme in the undocommands
class.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Robert C. Helling
Linus Torvalds
Tomaz Canabrava
Dirk Hohndel
willem ferguson
Miika Turkia
Grace Karanja
Gehad elrobey
Joakim Bygdell
Salvador Cuñat
Lubomir I. Ivanov
Gaetan Bisson
Marcos CARDINOT
Claudiu Olteanu
Torstein Husebø