| Age | Commit message (Collapse) | Author |
|---|
|
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order to offer a simple way to remove a calculated deco, if Control is pressed
while clicking on the trash can in the dive plan, that point and all following are
removed. This way the user can Ctrl-click on the first calculated waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code seemed way complicated, made way too many assumptions
and apparently was broken in certain cases.
This code seems very simple, looks correct and should fail gracefully
(i.e. simply do nothing) if things get confused.
Fixes #706
(I hope)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes #710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far we only plan OC dives, so let's not confuse things by showing the
set point for the tank.
Fixes #261
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #709
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Turns out that the fix in commit f7119bdccfb2 ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this information, when we re-plan a dive we can bring the user right
back to the point where they ended - they have the waypoints in the dive
pointes table and handles are shown on the right points in the profile -
and the rest of the dive is once again calculated by the planning
algorithm.
For now this state is lost when saving the dive file as we don't add this
flag in the sample to our saved files. So if we don't find any samples
marked as manually added we add ALL of the samples as way points on the
diveplan and the user has to manually remove the ones that were
calculated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In some cases we don't appear to remove all of the old handles from the
scene and end up showing a handle from a previous instance of the planner
in the upper right corner of the profile.
This patch makes sure that we remove any stray handles that might still be
around before entereing plan or add mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While planning we might have made changes to the displayed_dive. So we
need to make sure that the profile is redrawn after we cancel a plan (or a
re-plan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise points from a previous run might be around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When doing this, all waypoints of the calculated ascent are now waypoints
in the plan - so the user has to remove the ascent part of the dive in
order to really replan the dive. That's a pain, but we don't keep the data
around that would tell us which waypoints are user input and which ones
were calculated.
Fixes #527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's silly to carefully calculate our ascent for each new waypoint that we
add to the plan. Let's get them all in and THEN calculate an ascent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simply setting the pointer to NULL leaks memory.
And that C++ recursive two function implementation... oh boy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
into josh
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conflicts:
subsurface.pro
|
|
This defaulted to +/-1 which really isn't all that useful.
Fixes #703
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes #692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In some circumstances Qt will draw a really thick border around
rectangles. This explicitly makes the border of the tank bar thin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will be needed when pasting the data back into a (set of) dive(s).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Admittedly not very useful without working paste, but it's progress.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the GPS coordinates for a dive were incorrect for some reason and the
user wanted to clear them in order to then re-download / apply GPS
information from the Subsurface webservice, prior to this patch we would
always match the location name and re-populate the GPS coordinates, making
it impossible to clear a GPS location without also changing the location
name.
This patch fixes this - but if you have multiple dives with the incorrect
name / GPS location pair, the next edit to a dive that had the GPS
coordinates cleared will re-populate the GPS coordinates (at that point
Subsurface can no longer tell that this was intentional).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #701
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Which actually makes the code much clearer as now the object is at the
correct spot on the canvas and the positions inside are relative to that.
No more magic gradiants starting at "92"
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a checkbox for the divecomputer download dialog that allows you
to tell the download to put the newly downloaded dives into a trip of
their own. That in turn will disable the dive merging with any existing
dives, which means that you will not mix up your newly downloaded dives
with any old dives.
That, in turn, is very convenient of you know that some of the dives were
done by other divers (or from testing that happened during servicing etc),
or the dive dates etc were wrong because the dive computer date had reset
due to battery changes etc.
Once you have all the dives in a private trip of their own, you can then
fix them up (delete dives you don't want to merge etc), and then after all
the data is ok you might want to merge the cleaned-up results with
previous trips etc, and then manually ask subsurface to merge the dives or
whatever.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also restructures the code a bit to make it a little more sane and changes
the colors slightly.
With these changes I think we can claim that this
Fixes #557
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This shows a color-coded bar at the bottom of the graph that corresponds
with the active gas.
Todo:
- text that explicitly states gas on the left edge of the bar
- better vertical positioning of the bar
- ability to turn this on and off
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far, the fields for the two SAC rates did not show a unit and were implictly l/min.
Now they respect the settings for volume units. This was harder than I thought for two reasons:
1) Imperial units for SAC are cuft/min but a typical value would be .70. So I made the point
the field prefix and what is entered is actually hundreth of cuft per minute.
2) I had to get the rounding right in order not to get effects like 20l/min become .70 cuft/min (19800 ml/min
internally) which would then become 19l/min when switching back.
While being at it, I gave the gradient factors '%'-signs as units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch improves on the error reporting for the dive computer
configuration dialog to use config->lastError.
The previous code was using a different argument in each function,
which lacked uniformity.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
To avoid confusion, this code update makes the status text empty whenever
there is an error message. This makes the error message more prominent.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Changes the layout of the ConfigureDiveComputer dialog to use a
list of supported computers on the left, with a stacked widget
showing the configurable details.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
This patch implements the first step towards OSTC 3 firmware update.
Its not much, just file selection, but I will build up on it from there.
Implements a thread to initiate firmware updates. Currently, this is
for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Implements support for reading, writing and backup/restore of set point
settings for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Implements reading, writing and backup/restore of OSTC 3 Dil Values
(setting 0x15 to 0x19)
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Implements writing OSTC3 gas settings to the device.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Implements the reading of OSTC3 Gas Settings. These are settings
0x10 to 0x14
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Moves non gui classes (configuredivecomputer, configuredivecomputerthreads
and devicedetails) from qt-ui to the top level folder.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Start work for gas1-5 and dil1-5.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
I've moved the .pro file fixes to where it happened, so the rest of the
changes need explanation now. -Thiago
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
I am adding more OSTC 3 settings as I go along. Here, I have
added dive mode and saturation.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Changes the dive computer configuration dialog to use a
tabbed interface. This will make it easier to add new
dive computer models to the interface.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
Adds support for more OSTC 3 Settings to the reading, writing,
backup and restore functions. These settings are: last deco,
units, sampling rate, salinity, dive mode colour and compass
gain.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
The ConfigureDiveComputer class now has functions for complete
XML backup and restore. These dump the loaded settings on a
dive computer to an XML file, and there is an option to
restore them.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
|
This patch enables XML backup. We can now save the settings
to an XML file. Currently this backs up just the basic stuff
such as custom text, language and brightness.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
|
Dirk Hohndel
Robert C. Helling
Karina Mochetti
Joseph W. Joshua
Linus Torvalds