| Age | Commit message (Collapse) | Author |
|---|
|
They are useful to show when trying to figure out what's going on, so just
move them behind a check for verbose.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It turns out that I forgot to make sure that the progress bar is shown if
the user has things set up so that the cloud storage is the default dive
file that they open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is the authentication check and cloud server availability check which
are different from the one git does. The mechanism for overriding things
is different from there, but this should work just as well.
We intercept the SslErrors signal and if we get the known good hash for
our certificate, we simply call it good.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This uses the just introduced refreshProfile() function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the whole idea of calling these functions through the MainWindow
instance is atrocious, until we change the architecture of all this
refreshProfile() is a useful function to have.
In order to make this cleaner to implement I allowed an argument to
ProfileWidget's replot() which allows picking a specific dive. By
defaulting this to 0 we get the previous behavior when calling replot()
without an argument.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch changes the dive merging to be much more careful about
things, because it turns out that we had several small oddities that
caused big merge issues.
The oddities are:
- the dive "duration" is actually how long we spend under water.
But that means that when we do "dive->when + dive.duration.seconds"
to calculate the end of the dive, that is nonsensical if you came up
to the surface in the middle of a dive.
Now, normally you don't see profiles like that, but once you start
merging dives together, it can go from "small detail" to "dominant
factor".
- We have two different cases of merging: the automatic "merge new dive
computer download if it looks like the same dive" (which always has a
merge offset of 0, since we merge it as a new dive computer) and the
"merge two different dives into one longer dive.
The code assumed that it could look at the "downloaded" flag for the
dive to check one or the other, but that doesn't really work.
Reading a dive from an XML file isn't any different from downloading
it.
So we need to change the logic to determine what kind of merge it is
to actually check the passed-in time offset.
With this, Stuart Vernon's test-case of eight dives with short surface
intervals in between end up merging correctly into one dive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Stuart Vernon <stuartv@force2.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems this has never worked and nobody ever tested it. There was some
confusion with time zones since Qt takes by default local time when
converting from/to epoch while the exif library used UTC.
For my single test dive, this works now. But this needs more testing!!!
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I'm not quite sure why this works, but it appears to do the trick.
Apparently you are supposed not to have the meta type declaration in a
shared header file. Also, with Qt5.5 you can't have the declaration for
QBluetoothDeviceInfo, not even on Windows.
This may need more tweaking to make sure it works on all combinations of
OS and Qt version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Passing the cloud URL to the file select box leaves "git syntax" in the
filename which makes us look for a directory with a git repository in it
and give non-sensical error messages to the user.
With this we simply use the users email address as local filename with a
.ssrf suffix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The logic to pick the initial dive ID for the uemis downloader was very
confused, and did not work at all when restarting a download when the
Uemis filled up, and the "Force download all dives" flag was set. It
also required a rather odd Uemis-specific callback from the download UI
because of how it picked the initial ID.
This changes the logic to just look at the list of downloaded dives when
restarting, which simplifies the logic a lot, gets rid of the odd
special callback, and also means that the whole "Force download" issue
just goes away. It seems to work now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On some Windows platforms when we convert a Bth address to a String
it is formatted as "(XX:XX:XX:XX:XX:XX)". Therefore we first try to
remove the round parentheses and finally we truncate the string
to 17 because there are 6 two-digit hex values and 5 colons.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Spell Setpoint without space in user visable strings.
Explain authorized_paired.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove useless braces around single line if/then.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now inplace edit is supported, so enable editing the "Default"
statistics template, Also show warning when editing this template.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When editing a bundled template show warning message.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Edit the templates into the same file, which is more intuitive as
Custom.html is a bit confusing.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Somehow I broke this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The current way that facebook works is terrible: it's scattered
around tons of files ( at least 4 different files and classes )
this moves things around a bit, add a disconnect button that
was missing, cleans tons of code and fix inconsistencies.
I will also redo this part for 5.0, but it's too late for 4.5
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Unify spelling of this name in strings shown to the user, as commented
in mailing list. Internal coding use untouched.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Our OSTC 3 config code works for all hwOS devices, so be more clear when
saying that as the chooser option.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This connects up the custom serial code in the configure dive computer
dialogs.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When working with ostc's via bluetooth, they will reboot and exit
bluetooth mode when you send the disconnect command. Thats kinda
inconvenient when you would like to read your settings, change something
and write it back, you need to start bluetooth mode on your device
twice.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In a user provided sample the last column name included "\r\n" which
prevented us from automatically matching that column.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The fixup_dive() function assumes that values that are set already in the
divecomputer and dive structures come from a reliable source - sometimes
dive computers are able to track a maximum depth continuously, so that
value can be larger than the deepest sample and we need to honor that.
But in the case of a manually added dive, the samples define the dive. So
in this case we need to reset the values that were calculated when the
dive was first added so that the user can then edit the dive and reduce
the maximum depth reached in the profile and have that reflected in the
dive list.
Fixes #926
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Give the user the possibility to attach images to a dive even
when the times do not match
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the gas selection list on a waypoint refers to a gaschange there
influencing the following segments, there must not be a gas selection
on the last manually entered waypoint since from there the planner
handles the gas selection.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds delegates to simplify configuration of setpoint values in the
OSTC's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The table data is set via role, so retrieve the data via role too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This switches to use the closeEvent to save settings and cleanup instead
of the destructor.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since the spinner caused all kinds of problems inside VMs, wasn't shown at
all for some people on Win10 and appeared to get stuck a lot and still
left people with the perception that Subsurface was hung, this patch takes
a more traditional approach and gives the user a progress dialog.
An additional benefit of this is that the user now can cancel a hung
transfer.
The slightly weird passing in of the callback allows for the separation of
UI and core logic code...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Subsurface crashes when multiple dives are selected on divelogs.de
export. The crash occurs on malloc that is called indirectly from
xmlReadMemory().
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Reported by Ettore Atalan on Trnasifex.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This if'defs DC_TRANSPORT_* use with SSRF_CUSTOM_SERIAL, because the
enum doesn't exist when building against stock libdivecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Bluetooth implementation doesn't work if SSRF_CUSTOM_SERIAL
is undefined. Therefore it is a good idea to remove it from
the UI if the libdivecomputer version is wrong.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the Bluetooth download mode was disabled then remove
the Bth address from the device or mount point section and
reset the index.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Save the dive computer download mode flag. In this way,
if the user used Bluetooth mode to download its dives on
his last session he doesn't need to open the Bth selection
dialog if he wants to use the same device.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Due to the new dive site management, we need to include this information
before transforming the XML to divelogs.de format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need at least 23 columns when reading in Subsurface CSV.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let's set the configs properly for Subsurface CSV import for better
usability. (Actually the only meaningful configuration is units as
others are discarded, but I could not figure out how to set that to
imperial when needed - what is the variable holding this information?)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Showing the header line improves user experience quite a bit, even
though this configuration is actually discarded in the XSLT transform.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When adding APD2 import, the Sensus and Subsurface indexes should have
been increased by 1. While fixing this, switch to using enum names for
clarity.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The skipping of header field manipulation for APD was a bit too
aggressive, skipping the header fix up for all logs when on initial
state. Also, addition of APD2 was not taken into account.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In btdeviceselectiondialog.cpp ON and OFF strings need to be
translatables to avoid issues in the translation of the resulting
displayed string, as "turn on" and "turn off" translates to a single
word in most languages.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tim Wootton <tim@tee-jay.org.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Changes to capitalisation to comply with coding style
Changes to make some blocks of english sound a bit better
Signed-off-by: Tim Wootton <tim@tee-jay.org.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Linus Torvalds
Robert C. Helling
Claudiu Olteanu
Miika Turkia
Gehad elrobey
Tomaz Canabrava
Salvador Cuñat
Anton Lundin
Sander Kleijwegt
Claudiu Olteanu
Tim Wootton