| Age | Commit message (Collapse) | Author |
|---|
|
Most of the warnings are IMHO false positives:
e.g.: an enum variable is initialized in a switch statement that has a case for
each possible enum value - yet gcc 4.8 warns that it could be used
uninitialized;
or: two variables are initialized together in the code - second one of them
is previously initialized to -1 at declaration time, both are initialized
in an if (second one == -1) clause - so they are guaranteed to both be
initialized...
I did not "fix" those as the code is actually correct.
But there are three spots where it catches things that could indeed go wrong
(with odd input data in one of them).
This commit also adds a check to only call g_type_init() for older versions of
glib as in newer ones it is deprecated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They do the "02=0 means air" thing autmatically, and make for less
typing. So use them more widely in places that looked up the o2 and he
permille values of a gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A couple of these could clearly cause a crash just like the one fixed by
commit 00865f5a1e1a ("equipment.c: Fix potential buffer overflow in
size_data_funct()").
One would append user input to fixed length buffer without checking.
We were hardcoding the (correct) max path length in macos.c - replaced by
the actual OS constant.
But the vast majority are just extremely generous guesses how long
localized strings could possibly be.
Yes, this commit is likely leaning towards overkill. But we have now been
bitten by buffer overflow crashes twice that were caused by localization,
so I tried to go through all of the code and identify every possible
buffer that could be affected by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This creates a helper function called "gas_volume()" that takes the
cylinder and a particular pressure, and returns the estimated volume of
the gas at surface pressure, including proper approximation of the
incompressibility of gas.
It very much is an approximation, but it's closer to reality than
assuming a pure ideal gas. See for example compressibility at
http://en.wikipedia.org/wiki/Compressibility_factor
Suggested-by: Jukka Lind <jukka.lind@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This may look as a simple formatting change and won't make much sense
to the C programmer. It is an actual bug fix in Subsurface for the
target compiler, since it introduces bogus instructions.
The "month" variable ends up being incremented up to 72 for a single
"month++" call (if inside offset brackets).
gcc -v
Configured with: ../gcc-3.4.5-20060117-3/configure --with-gcc --with-gnu-ld
--with-gnu-as --host=mingw32 --target=mingw32 --prefix=/mingw --enable-threads
--disable-nls --enable-languages=c,c++,f77,ada,objc,java --disable-win32-registry
--disable-shared --enable-sjlj-exceptions --enable-libgcj --disable-java-awt
--without-x --enable-java-gc=boehm --disable-libgcj-debug --enable-interpreter
--enable-hash-synchronization --enable-libstdcxx-debug
Thread model: win32
gcc version 3.4.5 (mingw-vista special r3)
OS: Windows 7 [6.1.7601] - x64
Better explained here:
http://lists.hohndel.org/pipermail/subsurface/2013-February/003967.html
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
"<unit>/min" should be OK for most Latin languages, but for Cyrillic
we have to translate "min" as well.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This all seems very strange forward.
The reason for the check whether the stats_w widget has been populated is
that at the very beginning, when the UI is still being assembled, a first
call to switch_page() happens as the notebook pages are assembled. At that
point the stats_w widget is still empty which tells us that we aren't
ready to display anything.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now load and save this in the XML file, we do the right thing when
merging dives and show the edited air temperature in the Dive Info
notebook when a divecomputer doesn't have an air temperature.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When starting on this quest to stop using the first divecomputer instead
of data for the whole dive in commit eb73b5a528c8 ("Duration of a dive is
the maximum duration from all divecomputers") I introduced an accessor
function that calculates the dive duration on the fly as the maximum of
the durations in the divecomputers.
Since then Linus and I have added quite a few of the variables back to the
dive data structure and it makes perfect sense to do the same thing for
the duration as well and simply do the calculation once during fixup.
This commit also replaces accesses to the first divecomputer in
likely_same_dive to use the maxdepth and meandepth of the dive (those two
slipped through the cracks in the previous commits, it seems).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is currently only used in one place (in statistics.c), but it
certainly is consistent with the other recent changes to avoid using only
the first divecomputer when trying to make statements about a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the profile switched between different divecomputers, the Dive Info
notebook always showed either information from the first divecomputer or
(with some of the recent changes) information that had been collected from
all divecomputers and somehow consolidated for the dive.
With this commit we now show the data from the same divecomputer that is
also shown in the profile (which means if some data is available from one
of the divecomputers and not from another that will be correctly reflected
in the Dive Info notebook as the user cycles through the divecomputers.
This does beg the question if we should have some kind of "best data
available, considering all divecomputers" mode - but that's definitely not
something I'll tackle prior to 3.0.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Populate during dive fixup as the maximum depth shown by all the
divecomputers. Use this value (instead of the one in the first
divecomputer) in printing, statistics, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The existing code only populated the maxtemp based on the samples of a
dive and then in statistics.c checked if there was no such temperature and
replaced it with the water temperature of the first divecomputer.
It makes much more sense to add the water temperature information in every
divecomputer to the min / max calculation during the dive fixup phase.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of maintaining a rolling average and re-calculating it at each
stage, just calculate the surface_pressure average the natural way: as
the sum divided by the number of entries.
This results in a single rounding, rather than doing rounding multiple
times and possibly rounding wrong as a result.
Not that we care all that deeply about the LSB of the mbar value, but
the code is simpler and more obvious this way too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There are two ways to look at surface pressure. One is to say "what was
the surface pressure during that dive?" - in that case we now return an
average over the pressure reported by the different divecomputers (or the
standard 1013mbar if none reported any).
Or you want to do specific calculations for a specific divecomputer - in
which case we access only the pressure reported by THAT divecomputer, if
present (and fall back to the previous case, otherwise).
We still have lots of places in Subsurface that only act on the first
divecomputer. As a side effect of this change we now make this more
obvious as we in those cases pass a pointer to the first divecomputer
explicitly to the calculations.
Either way, this commit should prevent us from ever mistakenly basing our
calculations on a surface pressure of 0 (which is the initial bug in
deco.c that triggered all this).
Similar changes need to be made for other elements that we currently only
use from the first divecomputer, i.e., salinity.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far we always used the duration of the first divecomputer. The same fix
needs to be done for some of the other calculations that always use the
first divecomputer.
This commit also removes some obsolete code from the webservice merging.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One is about the amount, the other about the specific type of gar that was
used.
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Another oversight of what needed to be done when cleaning up the UI after
closing the data file.
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems to look better than the previous "centered" setup when
switching between notebook pages.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Mostly coding style and whitespace changes plus making lots of functions
static that have no need to be extern. This also helped find a bit of code
that is actually no longer used.
This should have absolutely no functional impact - all changes should be
purely cosmetic. But it removes a bunch of lines of code and makes the
rest easier to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I can't find it in myself to care enough to display this in other units.
mm/Hg anyone? I didn't think so.
We still can't edit this value, but at least if w are able to read it from
the dive computer we also show it to the user.
See #19
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This forces us to use the proper gtk accessor functions. It may not be
worth it if people actually do the Qt conversion, but if we want to try
gtk3 at some point, this might help.
This all came about because I was trying to explain on G+ what an
immense pain this all was to even figure out, if you don't actually know
gtk at all. Google and the gtk migration guide are almost useless, and
the gtk2 documentation itself actually uses the fields directly without
any accessor functions in several places.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code was incorrect - and completely unnecessary.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The statistics page only used each dive's "watertemp" attribute,
regardless of actual higher/lower temperatures in the samples. By
finding the actual max/min temperatures, the statistics page utilize
more "real" data, and look better even on single dives.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This moves the fields 'duration', 'surfacetime', 'maxdepth',
'meandepth', 'airtemp', 'watertemp', 'salinity' and 'surface_pressure'
to the per-divecomputer data structure. They are filled in by the dive
computer, and normally not edited.
NOTE! All actual *use* of this data was then changed from dive->field to
dive->dc.field programmatically with a shell-script and sed, and the
result then edited for details. So while the XML save and restore code
has been updated, all the displaying etc will currently always just show
the first dive computer entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch centralizes the definition for surface pressure, oxygen in
air, (re)defines all such values as plain integers and adapts calculations.
It eliminates 11 (!) occurrences of definitions for surface pressure and
also a few for oxygen in air.
It also rewrites the calculation for EAD, END and EADD using the new
definitons, harmonizing it for OC and CC and fixes a bug for EADD OC
calculation.
And finally it removes the unneeded variable entry_ead in gtk-gui.c.
Jan
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
.. and add the usual logic to not save the default values.
This also simplifies the initial system-specific setup of both of these:
since we have defaults for all the preferences that get set up at
startup, we can just initialize those defaults to the system-specific
fonts then and there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some UI texts were missing translation, such as:
"for selected dive"
"for all dives"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Previously we had lots of zeros and some non-sensical data displayed (the
temp values were actually not zeroed out).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If all selected dives appear to have numbers that make sense, assemble a
string that lists the selected dives (and try to be smart about finding
ranges) and display those in the frame of the statistics widget.
The code sets an arbitrary length limit on that list of dive numbers and
tries to be smart about creating an ellipsis if necessary.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We made the one in gtk-gui.c a global function and now had a clash with
the static one in statistics.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We generate the average temperature statistics by adding up the
(converted to user unites - not in millikelvin) temperatures and then
dividing by the number of dives we've added up over.
HOWEVER.
We did that summing of the temperatures into an integer variable, even
though the converted temperatures are floating point. So things got
rounded down to integers and the average temperature was just bogus
(although reasonably close).
We could do the summing of the temperatures in millikelvin and only
doing the conversion to the user at the very end. But the smaller patch
is to just change the accumulator to a double value.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Turns out we had a data field for visibility as a length unit - but never
used it. I can never guess how much visibility we actually had on a dive -
but I think most everyone can assign a rating between abysmal (zero stars,
"I couldn't read my dive computer even right in front of my mask" - trust
me, I had some of those dives) to amazing ("five stars, I could see farther
than I though possible" - and I had one or two of those, too). So I
changed this to an integer and am re-using the star infrastructure we have
for the overall dive rating.
When displaying this I was dismayed that we are running out of space in
the "Dive Notes" notbook. So I moved this to the "Dive Info" notebook.
This is not consistent and not logical. I think we need to revisit the
notebooks and think about what we want to display where.
While adding the infrastructure to manually enter the visibility I went
ahead and added the ability to manually enter the air temperature as well
(that was one of the things missing in the previous commit).
Fixes #7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far we don't parse air temperature data via libdivecomputer. Nor are we
set up to allow the user to manually enter it. We can parse it when
downloading from a Uemis Zurich, though.
This feature was suggested via trac.hohndel.org; this commit implements
only part of what is requested there, so I simply reference the ticket
here without closing it.
References ticket #7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This looks like a massive commit mainly because of the line number changes
in the .po files. That sadly hides what really happened here:
- the places where we manually build dates have now been localized
- the one place where we did the English "calculated plural" has been
modified so that it now can be correctly translated (in English this
just adds an 's' to the noun if the number is != 1 - in other languages
this tends to be much more complicated)
I then updated the two German translations to take advantage of the new
constructs. And while I was at it, I changed the translation Trip->Gruppe
to Trip->Reise as that seemed much more appropriate.
I also fixed another error in the German translation where I translated
"dive time" as "Startzeit" - but in the context it was "Dauer".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Maximum and minimum degrees in the yearly statistics were displayed
as -273.1°C if no temperature info was present.
H
From 7d9aad01133bc03980f66a2d109c9ef909e518ad Mon Sep 17 00:00:00 2001
From: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Date: Tue, 16 Oct 2012 18:13:16 +0200
Subject: [PATCH] Avoid zero degrees Kelvin in yearly statistics
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Maximum and minimum degrees in the yearly statistics were displayed
as -273.1°C if no temperature info was present.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- fix two missing strings in equipment.c (thanks to Tommi Saviranta for
pointing this out)
- add context for the translations of the Yearly/monthly statistics. The code
for this ended up being incredibly ugly, but the gettext infrastructure
really clashed with the way this is implemented. What I have now at least
works (tested with the German translation)
- merge the new strings into all the po files. The non-German translations need
to be updated. Make sure you remove the "# , fuzzy" lines or the current
Makefile will ignore those additions.
- some minor cleanup of the po files (many listed the wrong language, all of
them copied my incorrect use of PACKAGE (instead of saying "Subsurface").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is just the first step - convert the string literals, try to catch
all the places where this isn't possible and the program needs to convert
string constants at runtime (those are the N_ macros).
Add a very rough first German localization so I can at least test what I
have done. Seriously, I have never used a localized OS, so I am certain
that I have many of the 'standard' translations wrong. Someone please take
over :-)
Major issues with this:
- right now it hardcodes the search path for the message catalog to be
./locale - that's of course bogus, but it works well while doing initial
testing. Once the tooling support is there we just should use the OS
default.
- even though de_DE defaults to ISO-8859-15 (or ISO-8859-1 - the internets
can't seem to agree) I went with UTF-8 as that is what Gtk appears to
want to use internally. ISO-8859-15 encoded .mo files create funny
looking artefacts instead of Umlaute.
- no support at all in the Makefile - I was hoping someone with more
experience in how to best set this up would contribute a good set of
Makefile rules - likely this will help fix the first issue in that it
will also install the .mo file(s) in the correct place(s)
For now simply run
msgfmt -c -o subsurface.mo deutsch.po
to create the subsurface.mo file and then move it to
./locale/de_DE.UTF-8/LC_MESSAGES/subsurface.mo
If you make changes to the sources and need to add new strings to be
translated, this is what seems to work (again, should be tooled through
the Makefile):
xgettext -o subsurface-new.pot -s -k_ -kN_ --add-comments="++GETTEXT" *.c
msgmerge -s -U po/deutsch.po subsurface-new.pot
If you do this PLEASE do one commit that just has the new msgid as
changes in line numbers create a TON of diff-noise. Do changes to
translations in a SEPARATE commit.
- no testing at all on Windows or Mac
It builds on Windows :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One of the "+1900" cases got incorrectly dropped.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
[ I really wanted the utc_mkdate/mktime functions to use proper years,
rather than the idiotic "offset by 1900". However, we still mix
things with "localtime()" in one place, so for now we have to be
compatible with the insane tm_year semantics. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes the time type unambiguous, and we can use G_TYPE_INT64 for it
in the divelist too.
It also implements a portable (and thread-safe) "utc_mkdate()" function
that acts kind of like gmtime_r(), but using the 64-bit timestamp_t. It
matches our original "utc_mktime()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
By now the default file code seems quite matured, so in preparation for
2.0 we'll bring it back into master.
I made a few small clean-ups during the merge, but the merge itself is
very much straight forward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Two things I disliked in Miika's code in commit cbb5bd125b03:
Having an integer variable named "something_iter" with all the GtkTreeIter
around was really confusing.
And having the yearly_iter as a global variable instead of cleanly passing
it around really seemed suboptimal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will update the yearly statistics window (if open) whenever there
are changes to the dive list.
I also added a check not to open multiple statistics windows.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Reworded commit message
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Display yearly statistics in a statistics window with option to expand
the viewing on monthly level. The amount of dives along with basic
information like duration, depth, water temperature and air consumption
is displayed in yearly and monthly level. Thus you are able to compare
e.g. development of air consumption or diving activity from year to
year.
Using already existing macro for splitting seconds into minutes:seconds.
Moving repetitive code to a function (couldn't think of the suggested
clever macro, but this should pretty much do the trick).
Now the statistics are updated every time the process_all_dives function
is called. It might make sense to actually verify the structures need to
be re-allocated, but such optimization is currently not implemented.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Combined two commits.
Minor cleanups for white space and boolean values.
Significant changes to use the correct units for volumes vs. depths and to
avoid unneccesary lookups of the model storage based on the tree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This requires some helper routines that allow us to clear out all the
widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The previous commit was a patch from Lubomir, which also had some
whitespace fixes (to go with some new whitespace bugs to replace them)
in it.
I removed the whitespace changes from that patch (don't mix whitespace
fixes with other fixes, unless they are on the same lines!) but decided
to look for other whitespace issues, and this is the result.
I left the non-C files alone, some of the spec and script files also
have whitespace at the end of lines etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's an easy thing to do, but the for-loop ends up being pretty ugly, so
hide it behind the macro.
It would be even prettier with one of the (few) useful C99 features:
local for-loop variables. However, gcc needs special command line
options, and other compilers may not do it at all. So instead of doing
#define for_each_dive(_x) \
for (int _i = 0; ((_x) = get_dive(_i)) != NULL; _i++)
we require that the user declare the index iterator too, and the use
syntax becomes
for_each_dive(idx, dive) {
... use idx/dive here ...
}
And hey, maybe somebody actually will want to use the index, so maybe
that's not all bad.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This completely changes how we keep track of selected dives: instead of
having an array listing the selection ("selectiontracker") or trusting
the gtk selection information, just save the information about whether a
dive is selected in the dive itself.
That makes it trivial to keep track of the state of selection across
group collapse/expand events, or when changing the tree view model. It
also ends up simplifying the code and logic in other ways.
HOWEVER, it does currently (re-)introduce an annoying oddity with gtk:
if you collapse a dive trip that has individual selections, gtk will
forget those selections ("out of sight, out of mind"), and when you do
*new* selections, the old hidden ones remain.
So there's some games required to make gtk do sane things. We may need
to either explicitly drop selections when collapsing trips, or make sure
the group entry gets selected when collapsing a group that has
selections in it. Or something.
There may be other issues introduced by this too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Previously when only one dive was selected, the Stats notebook page would show
the statistics for all dive. That creates a very illogical behavior when
clicking on the different dive groups in the dive list. The stats page would
always show how many dives where in a group when the group was selected, except
when there was only one dive in the group, in which case the statistics for all
the dives were shown.
With this change we also show the statistics for the selected dives, even if it
is just one. If you want the statistics for all dives, simply select them all
(Ctrl-A or Command-A on a Mac).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Linus Torvalds
Lubomir I. Ivanov
Henrik Brautaset Aronsen
Jan Schubert
Miika Turkia