| Age | Commit message (Collapse) | Author |
|---|
|
Given that we might be adding a gas change event at t = 0 we need to check
for both that and t = time_or_first_sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make cylinders that have at least 5bar less pressure in the end than
in the beginning considered "used".
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... and repair a failed rebase (sorry).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The basic problem was that for gases containing more than 2147483648 ml
of nitrogen the calculations overflowed. This changes the code into
using floating point math for that calculation which will be more
accurate to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should be all of them (famous last words).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead of the 30 second heuristic we only assume that this is an explicit
first gas if the event coincides the first sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This isn't Cobalt specific, this is specific to dive computers that
indicate the first tank that's in use with a gaschange event that
coincides with the first sample.
We need to make sure that we suppress showing that gas change event
(regardless which cylinder it goes to) and instead set the correct
cylinder index from the very start of the dive.
This works with the test data I have and doesn't seem to break thing with
any of the files that I tried... but I'm worried that this is not the
right way to do things.
Fixes #742
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The gas use logic in the dive statistics page is confused.
The SAC case had a special case for "unknown", but only for
the first gas. Other gases had the normal empty case.
Also, the logic was really odd - if you had gases that weren't used (or
pressures not known) intermixed with gases you *did* have pressure for,
the statistics got really confused.
The list of gases showed all gases that we know about during the dive,
but then the gas use and SAC-rate lists wouldn't necessarily match,
because the loops that computed those stopped after the first gas that
didn't have any pressure change.
To make things worse, the first cylinder was special-cased again, so it
all lined up for the single-cylinder case.
This makes all the cylinders act the same way, leaving unknown gas use
(and thus SAC) just empty for that gas.
It also fixes the SAC calculation case where we don't have real samples,
and the profile is a fake profile - possibly with gas changes in between
the fake points. We now make the SAC calculations match what we show -
which is admittedly not at all necessarily what the dive was, but at
least we're consistent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
is_cylinder_used uses get_cylinder_index as underlaying function that
does the right thing with with respect on how to find the closest
matching cylinder, and handles both types of gaschange events correctly.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This function operates on cylinder ids, so its actually about cylinders
not gases.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With a pSCR it is entirely possible to have a SAC rate below 2.8l/min.
Since we still don't want to include SAC rates of 0 let's change the
cutoff to 0.1l/min.
Fixes #624
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This uses a bit of naive gas computations to figure out how much of
different base gases you used up on the dives the statistics is done for.
It's quite useful to get a minimum line about how big your gas bill is
going to be after a dive trip.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also make gasname() and get_gas_string() global functions (which allows us
to delete code elsewhere).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
[Dirk Hohndel: this overlapped with my commit 09e7c61feeea ("Consistently
use for_each_dive (and use it correctly)") so I took the
pieces that I had missed]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The way the macro is written there is no need to test the dive against
NULL before dereferencing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They happen - maybe the cylinder actually warmed up, or maybe the user
entered just a ending pressure without a starting pressure. Regardless,
just ignore cylinder pressure changes that go up.
Also ignore cylinders with a zero ending pressure: that's really a
*missing* pressure rather than an actual zero pressure. As Dirk says,
the scuba regulators don't even work without a healthy positive pressure
differential, so even when you breathe down a tank to "empty", it won't
be at zero pressure (this is true even with gauge pressure, where zero
means "atmospheric pressure").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If buffer copying is restricted by the buffer size in strncpy or
snprintf, the copied string is not NULL terminated. Add one to the end
just to make sure.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
First might be garbage if get_ranges would be called when
dive_table.nr == 0. This would rather signal that something else is
broken, but at least we shouldn't make it worse.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
get_cylinder_index implements a algorithm to map gaschange events to gas
idx. This is a bit clumsy to use it to map if a gas idx have bin used,
but its consistent with other parts.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We check in get_gaslist is_gas_used, so if were going to be consistent
about what we return from get_gaslist and in get_gas_used, only return
gas volumes that we actually consumed during the dive.
The problem now this fixes can be seen in dives/test10.xml
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes a crash when you have non-trip dives in your logbook.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Removing unused variables.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This shows how much gas form each cylinder was used. I would like to add
SAC to that list too but it became a mess trying to calculate average
depth per cylinder.
Design based on idea in #284
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The new implementation supports custom tags
which are provided by the user as well as
default tags which are provided by subsurface.
Default tags can be translated and will be written
to XML in their non-localized form.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
|
|
This gets rid of compiler warnings "format not a string literal and no
format arguments [-Wformat-security]". E.g. when building distribution
packages these warnings are often treated as errors preventing the
build (with good reason).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
SAMPLE_EVENT_GASCHANGE only contains o2 part, and not the he part so
when looking at ex the gaslist for dives/test20.xml it got it realy
wrong.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This compiles and looks about right, but it doesn't appear to work, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Make the entries for years bold, keep the months non-bold.
It's still a sea of data, but this is an improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Showing all gases (except air) as (o2/he) feels a bit odd, most people
would only use the two gas notation if they are actually diving trimix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The equipment tab will still show all defined gases, but the info for
the dive should only list the ones used.
Also change the name of the two gas related boxes to better reflect the
data that is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Pulled one more helper from statistics-gtk.c (but didn't modify the code
there to use it as that code is no longer being compiled).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #85
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Establish some useful helpers and use them when updating the values.
One of the helpers (from statistics.c) puzzlingly doesn't link - so that's
ifdefed out.
Also had to re-arrange the settings reading code (it came too late) and to
extract the expanding code of the top dive from the settings reading code
(as it had no business being there to begin with).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fairly straight forward, so far just one tiny bit of code restructuring,
everything else separated cleanly.
Added statistics-gtk.c and statistics.h
This should make no difference to functionality.
Cherry-picked from Qt branch; fixed merge issues mostly caused by
dive_tags and Makefile changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fairly straight forward, so far just one tiny bit of code restructuring,
everything else separated cleanly.
Added statistics-gtk.c and statistics.h
This should make no difference to functionality.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Student (training), Instructor (teaching), Photo and Video
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the salinity is 10000 we show (but do not set) the Freshwater tag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also trim the redundant "Dive" text from "Lake Dive", "Pool Dive", ....
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
[Dirk Hohndel: minor cleanups]
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Robert C. Helling
Anton Lundin
Linus Torvalds
Tomaz Canabrava
Miika Turkia
Maximilian Güntner
Henrik Brautaset Aronsen
Pierre-Yves Chibon