| Age | Commit message (Collapse) | Author |
|---|
|
We generate the average temperature statistics by adding up the
(converted to user unites - not in millikelvin) temperatures and then
dividing by the number of dives we've added up over.
HOWEVER.
We did that summing of the temperatures into an integer variable, even
though the converted temperatures are floating point. So things got
rounded down to integers and the average temperature was just bogus
(although reasonably close).
We could do the summing of the temperatures in millikelvin and only
doing the conversion to the user at the very end. But the smaller patch
is to just change the accumulator to a double value.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Turns out we had a data field for visibility as a length unit - but never
used it. I can never guess how much visibility we actually had on a dive -
but I think most everyone can assign a rating between abysmal (zero stars,
"I couldn't read my dive computer even right in front of my mask" - trust
me, I had some of those dives) to amazing ("five stars, I could see farther
than I though possible" - and I had one or two of those, too). So I
changed this to an integer and am re-using the star infrastructure we have
for the overall dive rating.
When displaying this I was dismayed that we are running out of space in
the "Dive Notes" notbook. So I moved this to the "Dive Info" notebook.
This is not consistent and not logical. I think we need to revisit the
notebooks and think about what we want to display where.
While adding the infrastructure to manually enter the visibility I went
ahead and added the ability to manually enter the air temperature as well
(that was one of the things missing in the previous commit).
Fixes #7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So far we don't parse air temperature data via libdivecomputer. Nor are we
set up to allow the user to manually enter it. We can parse it when
downloading from a Uemis Zurich, though.
This feature was suggested via trac.hohndel.org; this commit implements
only part of what is requested there, so I simply reference the ticket
here without closing it.
References ticket #7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This looks like a massive commit mainly because of the line number changes
in the .po files. That sadly hides what really happened here:
- the places where we manually build dates have now been localized
- the one place where we did the English "calculated plural" has been
modified so that it now can be correctly translated (in English this
just adds an 's' to the noun if the number is != 1 - in other languages
this tends to be much more complicated)
I then updated the two German translations to take advantage of the new
constructs. And while I was at it, I changed the translation Trip->Gruppe
to Trip->Reise as that seemed much more appropriate.
I also fixed another error in the German translation where I translated
"dive time" as "Startzeit" - but in the context it was "Dauer".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Maximum and minimum degrees in the yearly statistics were displayed
as -273.1°C if no temperature info was present.
H
From 7d9aad01133bc03980f66a2d109c9ef909e518ad Mon Sep 17 00:00:00 2001
From: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Date: Tue, 16 Oct 2012 18:13:16 +0200
Subject: [PATCH] Avoid zero degrees Kelvin in yearly statistics
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Maximum and minimum degrees in the yearly statistics were displayed
as -273.1°C if no temperature info was present.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- fix two missing strings in equipment.c (thanks to Tommi Saviranta for
pointing this out)
- add context for the translations of the Yearly/monthly statistics. The code
for this ended up being incredibly ugly, but the gettext infrastructure
really clashed with the way this is implemented. What I have now at least
works (tested with the German translation)
- merge the new strings into all the po files. The non-German translations need
to be updated. Make sure you remove the "# , fuzzy" lines or the current
Makefile will ignore those additions.
- some minor cleanup of the po files (many listed the wrong language, all of
them copied my incorrect use of PACKAGE (instead of saying "Subsurface").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is just the first step - convert the string literals, try to catch
all the places where this isn't possible and the program needs to convert
string constants at runtime (those are the N_ macros).
Add a very rough first German localization so I can at least test what I
have done. Seriously, I have never used a localized OS, so I am certain
that I have many of the 'standard' translations wrong. Someone please take
over :-)
Major issues with this:
- right now it hardcodes the search path for the message catalog to be
./locale - that's of course bogus, but it works well while doing initial
testing. Once the tooling support is there we just should use the OS
default.
- even though de_DE defaults to ISO-8859-15 (or ISO-8859-1 - the internets
can't seem to agree) I went with UTF-8 as that is what Gtk appears to
want to use internally. ISO-8859-15 encoded .mo files create funny
looking artefacts instead of Umlaute.
- no support at all in the Makefile - I was hoping someone with more
experience in how to best set this up would contribute a good set of
Makefile rules - likely this will help fix the first issue in that it
will also install the .mo file(s) in the correct place(s)
For now simply run
msgfmt -c -o subsurface.mo deutsch.po
to create the subsurface.mo file and then move it to
./locale/de_DE.UTF-8/LC_MESSAGES/subsurface.mo
If you make changes to the sources and need to add new strings to be
translated, this is what seems to work (again, should be tooled through
the Makefile):
xgettext -o subsurface-new.pot -s -k_ -kN_ --add-comments="++GETTEXT" *.c
msgmerge -s -U po/deutsch.po subsurface-new.pot
If you do this PLEASE do one commit that just has the new msgid as
changes in line numbers create a TON of diff-noise. Do changes to
translations in a SEPARATE commit.
- no testing at all on Windows or Mac
It builds on Windows :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One of the "+1900" cases got incorrectly dropped.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
[ I really wanted the utc_mkdate/mktime functions to use proper years,
rather than the idiotic "offset by 1900". However, we still mix
things with "localtime()" in one place, so for now we have to be
compatible with the insane tm_year semantics. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes the time type unambiguous, and we can use G_TYPE_INT64 for it
in the divelist too.
It also implements a portable (and thread-safe) "utc_mkdate()" function
that acts kind of like gmtime_r(), but using the 64-bit timestamp_t. It
matches our original "utc_mktime()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
By now the default file code seems quite matured, so in preparation for
2.0 we'll bring it back into master.
I made a few small clean-ups during the merge, but the merge itself is
very much straight forward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Two things I disliked in Miika's code in commit cbb5bd125b03:
Having an integer variable named "something_iter" with all the GtkTreeIter
around was really confusing.
And having the yearly_iter as a global variable instead of cleanly passing
it around really seemed suboptimal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will update the yearly statistics window (if open) whenever there
are changes to the dive list.
I also added a check not to open multiple statistics windows.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Reworded commit message
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Display yearly statistics in a statistics window with option to expand
the viewing on monthly level. The amount of dives along with basic
information like duration, depth, water temperature and air consumption
is displayed in yearly and monthly level. Thus you are able to compare
e.g. development of air consumption or diving activity from year to
year.
Using already existing macro for splitting seconds into minutes:seconds.
Moving repetitive code to a function (couldn't think of the suggested
clever macro, but this should pretty much do the trick).
Now the statistics are updated every time the process_all_dives function
is called. It might make sense to actually verify the structures need to
be re-allocated, but such optimization is currently not implemented.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Combined two commits.
Minor cleanups for white space and boolean values.
Significant changes to use the correct units for volumes vs. depths and to
avoid unneccesary lookups of the model storage based on the tree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This requires some helper routines that allow us to clear out all the
widgets.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The previous commit was a patch from Lubomir, which also had some
whitespace fixes (to go with some new whitespace bugs to replace them)
in it.
I removed the whitespace changes from that patch (don't mix whitespace
fixes with other fixes, unless they are on the same lines!) but decided
to look for other whitespace issues, and this is the result.
I left the non-C files alone, some of the spec and script files also
have whitespace at the end of lines etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's an easy thing to do, but the for-loop ends up being pretty ugly, so
hide it behind the macro.
It would be even prettier with one of the (few) useful C99 features:
local for-loop variables. However, gcc needs special command line
options, and other compilers may not do it at all. So instead of doing
#define for_each_dive(_x) \
for (int _i = 0; ((_x) = get_dive(_i)) != NULL; _i++)
we require that the user declare the index iterator too, and the use
syntax becomes
for_each_dive(idx, dive) {
... use idx/dive here ...
}
And hey, maybe somebody actually will want to use the index, so maybe
that's not all bad.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This completely changes how we keep track of selected dives: instead of
having an array listing the selection ("selectiontracker") or trusting
the gtk selection information, just save the information about whether a
dive is selected in the dive itself.
That makes it trivial to keep track of the state of selection across
group collapse/expand events, or when changing the tree view model. It
also ends up simplifying the code and logic in other ways.
HOWEVER, it does currently (re-)introduce an annoying oddity with gtk:
if you collapse a dive trip that has individual selections, gtk will
forget those selections ("out of sight, out of mind"), and when you do
*new* selections, the old hidden ones remain.
So there's some games required to make gtk do sane things. We may need
to either explicitly drop selections when collapsing trips, or make sure
the group entry gets selected when collapsing a group that has
selections in it. Or something.
There may be other issues introduced by this too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Previously when only one dive was selected, the Stats notebook page would show
the statistics for all dive. That creates a very illogical behavior when
clicking on the different dive groups in the dive list. The stats page would
always show how many dives where in a group when the group was selected, except
when there was only one dive in the group, in which case the statistics for all
the dives were shown.
With this change we also show the statistics for the selected dives, even if it
is just one. If you want the statistics for all dives, simply select them all
(Ctrl-A or Command-A on a Mac).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We spend way too much effort trying to get gtk to manage the dives that
are selected. The straw that broke the camel's back is that gtk forces us
to expand any nodes that we want to select - so selecting a summary entry
for a dive trip forced us to expand all the dives in the dive trip. Which
as Linus pointed out really sucked from a user experience.
So instead we now completeley ignore gtk's weird idea of what is selected
and what isn't and simply track things ourselves. We still need to play
some games with gtk to make sure that the correct rows are SHOWN as
selected, but still, the overall code seems much cleaner.
This commit contains a bunch of debugging code that is ifdef'ed out -
this is extremely useful to make sure I didn't mess anything up, but
eventually I'll want to remove that again as it just looks ugly in the
code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dive list now seems to behave intuitively.
In order to do this we had to intercept the select function in addition to
having a selection-changed callback. That way we can simulate the
multi-level selection and unselection that was missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We keep track of the DIVE_INDEX of all selected dives and simply re-select
those dives after changing model (date based sort or sort by other
column).
There are a few TODOs left. We lose the sort direction (ascending /
descending) when switching models. We also don't correctly deal with the
user selecting summary rows in the tree model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Several people reported the average time problem, but there's another
one lurking there too: if the dive duration is zero, you get bogus
average depth information too (but because that one was a floating point
divide, and by default they are unsignalling on x86, it didn't crash, it
just resulted in bogus results).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
old_sac_time was always 0 when calculating average air consumption.
Thus the results were incorrect. Move the counter to stats_t structure
as suggested by Linus.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If at least 2 dives are selected, show statistics of these dives on
Overall Stats. Otherwise, show the statistics of all dives. Temperature
is also added to the shown statistics.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Minor change to avoid adding statistics.h (moved the global variable and
external function declaration to display-gtk.h).
Another minor change to the text displayed for the "Stats" notebook page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I don't really like calling the shallowest dive "min depth", but all other
texts that I could come up with that were reasonably short weren't any
better...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
No additional statistics added, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now this just changes the infrastructure - nothing outside of
statistics.c is modified. This is simply in preparation to split out the
single dive info and the total dive statistics in the future (as we are
creating more info and more stats and they will overflow the screen area
available - so this will turn into two notebook tabs).
This commit does not change any functionality.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having the O2 permille defined once is more readable.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
|
|
Miika fixed the statistics code that didn't properly check for the "no
cylinder info" case - this cleans it up and just uses the helper
function in equipment.c.
Rename the helper to be slightly better named while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
O2 per cent from dive computer should be shown in Dive Info if one is
given even without pressure information for the cylinder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The statistics page calculates air use separately, and also needs to be
fixed up for the split of the pressures into sample-vs-start/end.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make statistics.c use snprintf() with weekday(), monthname() instead of
strftime(). The mingw strftime() ends up having lots of problems at
least on Windows unless you set the locale just right, so just avoid the
problem by doing the simple function by hand. We already did that in
other places anyway.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Simply accept temperatures that are above absolute zero.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Found using the new test dives
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Found using the new test dives
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Random cutoff is 2.8l/min (or about 0.1cuft/min)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Actually more of a cut'n'paste-o
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Silly mistake
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This provides the relevant information for the currently selected dive
plus a bunch of statistics over all dives in the dive_table.
The visual design has lots of room for improvement
- right now the different fields change size
- it might be nice to have a more modern look for the entries
- the O2/He field is odd - for most divers the He value will
always be 0, so maybe we should only show He if there's at least one
dive that uses He? Also, we simply do a comma separated list of gases
for all the tanks used
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Linus Torvalds
Dirk Hohndel
Lubomir I. Ivanov
Henrik Brautaset Aronsen
Miika Turkia