| Age | Commit message (Collapse) | Author |
|---|
|
The series were passed a pointer to the QGraphicsScene to add
their item. In the future these items will be replaced by
QSGNodes. To add these, the series need a reference to the StatsView.
Therefore pass it in the constructor. Once everything is
replaces by QSGNodes, remove the QGraphicsScene member.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Catch mouse move events and move the legend accordingly.
Currently, this is the only item that can be dragged and
therefore there is no need of doing some kind of fancy
interface. Simply keep a pointer to the legend if it is
dragged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In order not to waste CPU by constantly rerendering the chart,
we must use these weird OpenGL QSGNode things. The interface
is appallingly low-level and unfriendly.
As a first test, try to convert the legend. Create a wrapper
class that represents a rectangular item with a texture
and that will certainly need some (lots of) optimization.
Make sure that all low-level QSG-objects are only accessed
in the rendering thread. This means that the wrapper has
to maintain a notion of "dirtiness" of the state. I.e.
which part of the QSG-objects have to be modified.
From the low-level wrapper derive a class that draws a rounded
rectangle for every resize. The child class of that must then
paint on the rectangle after every resize.
That looks all not very fortunate, but it displays a
legend and will make it possible to move the legend
without and drawing operations, only shifting around
an OpenGL surface.
The render thread goes through all chart-items and
rerenders them if dirty. Currently, on deletion
of these items, this list is not reset. I.e. currently
it is not supported to remove individual items.
Only the full scene can be cleared!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
They were bundled via the desktop qrc, but they need a shared qrc that
can be used in both apps.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's 1.960, not 2
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
I was coninced that that rather than doing an order of
magnitude estimate of the confidence region it's better
to have the correct concave shapes that indicate the
95% confidence level for the regression line.
It also turned out that the previous expression was
missing a factor of 1/sqrt(n).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This is what clang suggested in compiler warnings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
The goodness of fit of a regression line is the percentage
of the variance of the y values that is explained by the
dependence on the x values.
Set the alpha value of the regression line to this goodness
of fit.
Further, set the width of the regression line to a standard
deviation of the values from the regression line valies.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
In order to be able to correctly size the chart type popup, we'll need
access to the total count or rows as a property that signals changes to
QML.
The hack to use rowCount() as the READ function requires that rowCount()
can be called without argument, therefore the addition of a default
parent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For QML, the roles have to be associated dynamically with
name. Moreover, the model has to be registered as a QML
type to make it accessible from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
In categorical axes all labels were printed leading to a big
tohu wa-bohu for two many bins. Therefore, if a label is
larger than the space between two ticks, replace by an ellipsis.
Adjust the size of the ellipsis (".", ".." or "...") to the
available space.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old code didn't consider that labels can peak out of
horizontal axes if labels are under ticks.
This commit takes this into account. However, it must be
noted that this is only heuristics: Before setting the
size of the axes, the actual minimum and maximum label are
not known, because we round to "nice" numbers. But the
size of the axis can only be set after knowing the overhang,
leading to a circular dependency. Therefore, the code
currently simply uses the minimum and maximum value of
the data, hoping that the "nice" values will not format
to something significantly larger. We could do a multi-pass
scheme, but let's not for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The people binner (called "buddies") is too coarse. Split into
buddies, dive guide and people (the old "buddies", which is
a combination of buddies and dive guide).
Reported-by: Peter Zaal <peter.zaal@gmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Android and iOS use qmake, so add the code to the .pro file.
This also removes all remnants of QCharts includes and uses and all the
references to QCharts in our various build systems.
That was a brief but extremely useful detour.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It turns out that the wrong base class was used for the chart.
QQuickWidget can only be used on desktop, not in a mobile UI.
Therefore, turn this into a QQuickItem and move the container
QQuickWidget into desktop-only code.
Currently, this code is insane: The chart is rendered onto a
QGraphicsScene (as it was before), which is then rendered into
a QImage, which is transformed into a QSGTexture, which is then
projected onto the device. This is performed on every mouse
move event, since these events in general change the position
of the info-box.
The plan is to slowly convert elements such as the info-box into
QQuickItems. Browsing the QtQuick documentation, this will
not be much fun.
Also note that the rendering currently tears, flickers and has
antialiasing artifacts, most likely owing to integer (QImage)
to floating point (QGraphicsScene, QQuickItem) conversion
problems. The data flow is
QGraphicsScene (float) -> QImage (int) -> QQuickItem (float).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Copy&paste error: the 20 m binner binned to 10 m.
Reported-by: Peter Zaal <peter.zaal@gmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When calculating the quartiles, we need the count of dives
anyway, which makes it trivial to export this value to
the frontend.
Fixes an erroneous "mean", which should be "median".
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Trivially a copy of the "buddies" code.
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The dive sites where sorted by location in RAM, which is just
silly. Add a DiveSiteWrapper that sorts by name, though that
should probably be improved.
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This makes sense and is easy to implement.
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The range for a one-bin chart is [-0.5,0.5], thus the range
in an n-bin chart is [-0.5,n-0.5], not [-0.5,n+0.5].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was requested on the mailing list and it makes sense to
have it. Of course, not all charts make sense: e.g. a plot dive-#
vs. count is a bit redundant...
Sadly, this can't use the generic IntRangeBinner, because dive-#s
start at 1, not 0.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was requested on the mailing list. Reduce code size somewhat
by deriving the binner and the variable classes from common
base classes with a mean-vs-max flag.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The grid is based on the axis ticks. If labels in histogram
axes were skipped (because there are too many bins), it could
happen that the grid was incomplete, because the first and/or
last tick were missing. Add these explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The info box was placed either above or below the mouse-pointer.
If the pointer is at the center and the infobox higher than
half the chart, it would cross the border. Detect this case
and place the info box at the center.
Same logic for right/left, though that should typically not
happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The coordinates of these were calculated when creating the feature.
This is wrong, because the min/max values of the axes can change
on resize to get "nice" number. Therefore, recalculate after resizing.
This means that the general "LineMarker" class has to be split into
two classes, one for regression lines and one for median/mean
markers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
With removal of QtCharts' axes, the grid was lost. Readd it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Easy enough to implement, but one weirdness:
To get the height of the rotated text, one has to access the
width() member of the boundingRect. I'm not sure if that makes
sense, but so be it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Replace by custom implementation, with the ultimate goal to
remove the QtCharts module. This doesn't yet display axis
titles or a grid.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The bars were set to the z-value of the labels. Not an issue,
since the labels are generated after the bars and therefore
plot later. Still, do the right thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Since we want to get rid of QtCharts, we have to render our own
title. Simply keep around a QGraphicsSimpleTextItem and put in
the center of the chart. Define the borders to the scene as
constants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In the future we want to use our own axis implementation to
convert from/to screen coordinates. For this purpose, we
need to save the axes with the series. Especially if we want
to support multiple series on different axes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The chart was passed as argument to the function recalculating
the axis labels. Instead, pass the chart in the constructor of
the axes and save it. This gains us flexibility for the future:
There will be more functions that need to access the chart (e.g.
resizing of the axes).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Linear algebra class was a while ago, but somehow this does look more
logical to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't really give a user visible error message which is kind of a problem,
but at least we don't crash anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Recently code was added to reset variable 1 binner if the second
variable does not support an unbinned first variable.
It forgot to check whether a binner was already set. Do this.
But validate the old binner first!
This code is extremely fragile and will have to be redone.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
A steep regression line would shoot out of the chart. Therefore,
clip to the y = minY and y = maxY lines.
QtGraphicsScene has its own clipping routines, but they are
very general, so let's do this trivial case by hand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Dirk says rounded corners look better. This now looks a bit
extreme to me and probably the border size should be increased.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
For better visual guidance, format labels as "count (percentage)"
in horizontal bar charts. In vertical bar charts two lines are used
anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After each column, instead of setting the new x-variable, the
new value was added to the old value. This led to ever increasing
gaps.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The old ways was to select the chart first, then depending on
the chart choose the binning.
Willem says that it should work the other way round: select
the binning (or operation) and make the charts depend on
that.
I'm not arguing one way or the other, just note that the new
way is much more tricky, because it is easy to get unsupported
combinations. For example, there is no chart where the
first variable is unbinned, but the second axis is binned
or has an operation. This makes things distinctly more tricky
and this code still needs a thorough audit.
Since this is all more tricky, implement a "invalid" chart
state. Ideally that should be never shown to the user, but
let's try to be defensive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Qt's comboboxes are controlled by models, there's no way around
that. To customize the chart-selection widget this must therefore
be abstracted into a model. On the upside, this hopefully can
be used for desktop and mobile.
The model provides icons and paints a warning-symbol on it
if the statistics core code deems the chart to be not recommended.
Notably, when plotting a categorical bar chart against a
numerical value (in such a case histograms are preferred).
Includes a fix for a silly oversight in CMakelist.txt: add the
statstranslations.h header.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Two warnings concerning division by zero and non-initialization
of a member variable, respectively.
Both are false positives. However, Coverity is excused because
it probably doesn't understand std::vector<> and also can't
know whether the object in question is generated in a different
source file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The StatsView shows the chart described by the StatsState structure.
It is based on a QML ChartView. This should make it possible to
easily port to mobile. It does not include any of the UI around
the chart, viz. the variable and chart selection, etc.
The code checking for the statistical significance of the regression
line was written by Willem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
|
|
The StatsState structure fully describes the current state of
the chart: the selected axes, operations and additional chart
features, such as legend or labels.
The code implements sanity checks and reacts accordingly,
if an invalid combination of variables and charts is chosen.
The chart and variable lists to be displayed can be queried
and are encapsulated in the StatsState::UIState structure.
Some variable / chart combinations are possible, but not
recommended, which is represented by a warning flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Implement a simple scatter series for plotting two numerical variables
agains each other. Since the scatter symbols may overlap, on hover
multiple dives are shown in the information box. If the box
would become too large, only the first few dives are shown followed
by "and X more".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Implement a simple count-based pie chart. Percentage labels
are shown in the pie slices, the names outside the pie slices.
On hovering over a slice, the actual counts are shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
Berthold Stoeger
Dirk Hohndel
Robert C. Helling