| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is hard coded in version.cmake for now. The intent is to go to 1.0 in
the first release version and to increment from there whenever we create
an update.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We had two totally different usage cases for "get_volume_string()": one
that did the obvious "show this volume as a string", and one that tried
to show a cylinder size.
The function used a magic third argument (the working pressure of the
cylinder) to distinguish between the two cases, but it still got it
wrong.
A metric cylinder doesn't necessarily have a working pressure at all,
and the size is a wet size in liters. We'd pass in zero as the working
pressure, and if the volume units were set to cubic feet, the logic in
"get_volume_string()" would happily convert the metric wet size into the
wet size in cubic feet.
But that's completely wrong. An imperial cylinder size simply isn't a
wet size. If you don't have a working pressure, you cannot convert the
cylinder size to cubic feet. End of story.
So instead of having "get_volume_string()" have magical behavior
depending on working pressure, and getting it wrong anyway, just make
get_volume_string do a pure volume conversion, and create a whole new
function for showing the size of a cylinder.
Now, if the cylinder doesn't have a working pressure, we just show the
metric size, even if the user had asked for cubic feet.
[Dirk Hohndel: added call to translation functions for the units]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The code was wrong (and in the case of metric display for weights >= 20kg,
spectacularly wrong) in more or less all cases.
Rounding. It's good for the sole.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- coding style (ugh - I should have fixed that when I first committed them)
- remove redundant variables
- add similar code to the length and temperature helpers
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now it is possible to enter a specific unit that is different from the
unit stored in the preferences. If only numbers are inputed the unit will
be the same as specified by the users preferences.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
and rename it to DiveObjectHelper, since it should be an QObject
based class to make it easier on the QML, grantlee and widgets
side to display the dive's internal data.
each Q_PROPERTY defined in the DiveObjectHelper.h file
can be acessed directly via it's name.
So, if you are on a model that returns a dive, acess it's name
by dive.name
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems that the first language in the list of languages isn't always the one
that specifies the country code. So try the first three to see which one is the
first to contain a country code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Getting closer to being able to really edit / add dives in the mobile UI.
This works for manually added dives - needs a bit more thought for dives
downloaded from dive computers as we don't necessarily want to change the
maxdepth in conflict with the samples.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the QML UI needs the GPS information, we need a way to get to it.
I'm not convinced that having it as comma separated string is the best way to
go, but that's what I need for the Google API so that's what I picked for now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It no longer makes sense to lie about the version. If you are running a product
build, then the canonical version is the same version as the plain version used
to be. And in either case it makes much more sense to simply log the full
version information.
We used to have the differently styled versions for different OSs, but I don't
think this is needed anymore. Let's hope this doesn't go down as one of these
"famous last words" moments...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to calculate the offset based on the time of the dive - the mobile
version doesn't use displayed_dive. This way time stamps are now correct
all year round.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need a space between the two string literals.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order to allow the backend to match account in multi user mode, it
needs to know if the requests are coming from the same instance of
Subsurface. Since I had to change the backend to add the ability to
retrieve a location service userid I added this capability at the same
time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows the backend to know which version of Subsurface is
contacting it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When the user requests "dive.cylinders" from Grantlee HTML
we need to always put at least the default cylinder and mark
the description as "unknown" (same as other locations) if it's
not set (i.e. when the description pointer is NULL).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #962
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Dive helper class only picks the first cylinder and the total
weight. This patch adds the option to dump the cylinders and weights
as formatted lists (via cylinders() and weights()) or to retrieve
a specific cylinder or weight via (cylinder(index) and weight(index)).
Each cylinder and weight string contains detailed information:
cylinder:
- desc.
- pressure (+start/end)
- gasmix
- etc...
weight:
- desc.
- weight (in units e.g. kg)
If no description is found for a cylinder or weight the contents
for this particular unit is filled with EMPTY_DIVE_STRING ("--").
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The macro is used as a common replacer for the "--"
string when the Dive class members return no particular
information for a "struct dive" property.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The Dive::put_notes() does not handle HTML formatting or line
breaks properly. Apparently Grantlee supports HTML variables, but
the planned notes (which are HTML) look very bad when inserted in the
Grantlee template - e.g. the text is huge and the table box is cut
for some odd reason. I don't have a good solution for these issues
ATM; especially for the "table cell being cut part".
An important feature in the dive notes is to support line breaks.
This patch adds support for line breaks both in planned dive notes
and non-planned dive notes via the <br> tag. This makes the
planned dive notes look tolerable.
The next step would be to support the <br> tag, which has
to happen in the bundled templates them self.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Oops. I fixed the previous commit, tested the fix, and then forgot to
update the commit and instead pushed it out. That was dumb.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now the distance is always in meters, the mobile app doesn't deal
with units at all, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This drastically improves the time it takes to select a dive
with several pictures at the expense of longer startup and
bigger hash files.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this the new date and time formats mostly work
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now we can actually change them in preferences instead of just deriving
them from the language set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And adapt a new CMakeLists.txt file for it. On the way I've also
found out that we where double-compilling a few files. I've also
set the subsurface-core as a include_path but that was just to
reduce the noise on this commit, since I plan to remove it from
the include path to make it obligatory to specify something like
include "subsurface-core/dive.h"
for the header files. Since the app is growing quite a bit we ended
up having a few different files with almost same name that did
similar things, I want to kill that (for instance Dive.h, dive.h,
PrintDive.h and such).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Tomaz Canabrava
Dirk Hohndel
Linus Torvalds
Joakim Bygdell
Tomaz Canabrava
Robert C. Helling
Lubomir I. Ivanov