| Age | Commit message (Collapse) | Author |
|---|
|
and rename it to DiveObjectHelper, since it should be an QObject
based class to make it easier on the QML, grantlee and widgets
side to display the dive's internal data.
each Q_PROPERTY defined in the DiveObjectHelper.h file
can be acessed directly via it's name.
So, if you are on a model that returns a dive, acess it's name
by dive.name
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
with the adittion of gpslistmodel/location, the libraries
qt-models had a direct dependency on subsurface-core, and
subsurface-core had a direct dependency on qt-models, this is
bad.
Moving a bit of code around I'v managed to clean this out, and
also to clear a bit of uneeded code (GpsTracker and gpsTracker where
basically the same thing.)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes the desktop version compile again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the conversion of uint64_t to QVariant works fine with some Qt /
compiler combinations, it fails on others. Use Qt's type instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is not the same as the existing download to apply the gps fixes to the
dive list. This allows us to download and store the GPS fixes in the settings.
I may end up changing things around to have a shared implementation for
downloading the GPS fixes, but for now this seemed easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will allow us to visualize the GPS fixes that are currently stored in the
QML UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
At the moment, if we have, say, dives ... 100, 101 and 102 and we merge 101 and
102, we get a list numbered ... 99, 100, 102. This is, probably, an
undesired behavior. The patch simple chooses lower of both dive numbers instead
of higher one.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seems that the first language in the list of languages isn't always the one
that specifies the country code. So try the first three to see which one is the
first to contain a country code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we loaded the dive list from cache and then try to figure out if the remote
repository had anything different, we were being super stupid if the SHA was
identical... we had already cleared the dive list by the time we decided that
we didn't need to load things. Granted, the model was still populated (oops),
but the backend data structure was cleared and accesses to it (e.g., when
drawing the profile) would cause things to crash.
The helper function duplicates some code, but trying to not duplicate the code
made things even harder to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we have a fix that is fewer than 5 minutes old, take it, otherwise trigger
an update.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There may be reasons where we want to get the position even if the criteria
aren't met.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It makes much more sense to have this as a private member of the class instead
of a static in one of the functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Getting closer to being able to really edit / add dives in the mobile UI.
This works for manually added dives - needs a bit more thought for dives
downloaded from dive computers as we don't necessarily want to change the
maxdepth in conflict with the samples.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 8c1cc4524d19 ("Don't reload identical data") I got a little
carried away. Before comparing SHAs we need to make sure that
a) this is a git repository at all
b) we have an actual SHA before we claim to have the data loaded
Reported-by: Paul-Erik Törrönen <poltsi@777-team.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Found by cppcheck. Minor memory leak if usb_reset fails
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This probably is a serious bug, found by cppcheck.
Original code had paren's in probably the wrong place!
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we already have the same SHA loaded and no changes have been made to the
dive list then there is no point in loading the dives again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can check if the local cache is in sync with the remote without
always triggering a load of the dives from git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can first load from cache and then update from the network in the
background.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the QML UI needs the GPS information, we need a way to get to it.
I'm not convinced that having it as comma separated string is the best way to
go, but that's what I need for the Google API so that's what I picked for now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It no longer makes sense to lie about the version. If you are running a product
build, then the canonical version is the same version as the plain version used
to be. And in either case it makes much more sense to simply log the full
version information.
We used to have the differently styled versions for different OSs, but I don't
think this is needed anymore. Let's hope this doesn't go down as one of these
"famous last words" moments...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Also fixes a capitalization error that prevented finding libssh2 in some
circumstances. And adds a missing include when building with libzip on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to calculate the offset based on the time of the dive - the mobile
version doesn't use displayed_dive. This way time stamps are now correct
all year round.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we looking for dive details and are trying to guess the offset between
object_id and logfilenr, we need to treat logfilenr 0 as special - it
means we read past the end of the list of stored dives and need to walk
backwards.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some backends support giving tank data for some, but not all models that
they support (and simply report no tanks for those models that don't
support this). The Suunto Vyper is one of the dive computers where this
happens and without this change we report angry red warnings after a
perfectly correct download.
So this changes the logic to only show that error if there actually were
tanks reported.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Adding pictures to the repository was a big mistake on my part. It's very
easy for the git repositories to reach a gigabyte and more making sync
times (and especially "first download" times) completely unreasonable.
This doesn't solve the problem for existing repositories (as the pictures
are already there, in the git history), but at least it prevents us from
storing more pictures out there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Tank icons were shown at incorrect spots on the profile
when the DiveEventItem object held a pointer to a struct
event even after the struct event at that address had
been freed. When internalEvent is a pointer to freed
memory, internalEvent->time.seconds could have all kinds
of crazy values, which get used in member function
DiveEventItem::recalculatePos to place the tank at bad
x coordinates.
The DiveEventItem(s) no longer store a pointer to memory
that they do not own. This way, no matter how the path of
execution arrives into slot recalculatePos, we never need
fear that the DiveEventItem will dereference a garbage
pointer to a struct event.
Fixes #968
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need a space between the two string literals.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One user's debug log shows valid data, only not in the format we've seen
before (with the response starting with '{'). Instead he gets a repeat of
the second word in the response to processSync prepended to the expected
output. So let's skip the data until the first '{'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Don't just clear out the buffer pointer, free the memory, first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way we can call members from different parts of the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should accelerate the startup of the UI a little more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we already have an air temperature set, don't overwrite it with
potentially less accurate infromation from the first sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The runtime html table is printed only if printing
a verbatim diveplan is disabled. So the closing tags
should be printed only in that case.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This prepares for the smartrack converter webservice.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
"warning: "DC_VERSION" redefined" is thrown if a chain of
includes previously includes windows.h:
In file included from c:/bin/mingw/i686-w64-mingw32/include/windows.h:71:0,
from C:/bin/qt/5.5/mingw492_32/include/QtCore/qt_windows.h:63,
from C:/bin/qt/5.5/mingw492_32/include/QtGui/qopengl.h:43,
from C:/bin/qt/5.5/mingw492_32/include/QtQuick/qquickwindow.h:39,
from C:/bin/qt/5.5/mingw492_32/include/QtQuick/QQuickWindow:1,
from C:/dev/subsurface/subsurface-core/qt-gui.h:13,
from C:\dev\subsurface\subsurface-mobile-main.cpp:9:
and which on it's own includes wingdi.h which defines
"DC_VERSION 10" (windows printer stack related).
To solve the warning DC_VERSION is undefined in
subsurface-core/libdivecomputer.h.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Another issue pointed out by Lubomir.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
QDateTime::toTime_t() is misleading as it does not return
a C time_t type, but a 'unsigned int' or rather the Qt
'uint' typedef.
To prevent the warning we cast it to 'time_t' and to
comply with the 'lastTime' variable.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Lubomir pointed out that this variable was unused. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In theory this should only report a location service if this is a
satellite based service, but sadly geoclue appears to claim that there is
a satellite based service in my Linux VM - so I'm doubtful that this does
what the documentation says it does.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We still aren't doing anything with it, but at least it's there now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While this is primarily something targeted at a mobile device, with many
of the 2 in 1 devices it is possible that the user might be running the
desktop version of Subsurface on a mobile device.
As a first step to make it possible to collect GPS fixes on such a device
we need to make the infrastructure to do so available in the desktop
application as well.
This still needs to be hooked up in the desktop UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In order to allow the backend to match account in multi user mode, it
needs to know if the requests are coming from the same instance of
Subsurface. Since I had to change the backend to add the ability to
retrieve a location service userid I added this capability at the same
time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows the backend to know which version of Subsurface is
contacting it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Tomaz Canabrava
Dirk Hohndel
Salvador Cuñat
Stephen Hemminger
Robert C. Helling
K. \"pestophagous\" Heller
Lubomir I. Ivanov