| Age | Commit message (Collapse) | Author |
|---|
|
Add a few icons representing chart type (in internal terms:
chart subtypes): bar (grouped, stacked, single), box-and-whisker,
data points, pie. These should be shown in the chart selection
box.
Yes, the "artwork" is not pretty, so see these as a placeholder.
Morover, add a "warning" icon. This icon already existed as SVG,
but was not references (its png render was).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No user of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No user of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No user of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No users of those.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
No user of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
There were no users of these...?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This allows Subsurface to obtain the coordinates of a dive directly
from a GPS track. It parses a GPX file (GPX V1.0 or V1.1) from
a GPS to locate the trackpoint immediatedly after the start of a
dive. There is an additional "Use GPS file" button in the Edit Dive
Site panel that is selected from the Notes tab. Image:
This allows one to select a GPX file, bringing up the Import GPS
dialog.
There is extensive provision for cross-checking that the dive track
synchronises with the dive start and end. If the Save button in the
dialog is pressed the dive coordinates are copied into the Dive
Coordinates text box in the Edit Dive Site panel. The map moves
to indicate the location of the dive site.
The bulk of the work is done in importgps.cpp. The code is
pretty intergrated: I tried to break it up in smaller commits but that
was not feasible.
The code includes responses to the comments by @neolit123 and
@bstoeger. The C-based file input was replaced with Qt-based
code using QChar, QString and QFile.
[Dirk Hohndel: fixed several small issues in the .ui file, removed
various headers includes that weren't needed and
fixed printing of minutes as zero padded]
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The user may modify the salinity by selecting a water type from the combobox.
The new datum does not replace the existing salinity value but is stored in a
separate variable within the dive structure. If the dc-based salinity is
overwritten, there is an exclamation mark next to the modified salinity value
to indicate that the salinity has been overwritten. The dc-derived salinity can
always be recovered by selecting the "use dc" option in the combobox.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add a separate preferences tab for resetting all preferences to their default values.
One or two very small alterations to other sections of the preferences UI code.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add a preferences tab for dive download, allowing resetting the
buttons representing download connections in the Download panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Split the Network Preferences page into two screens:
1) Network preferences
2) Cloud storage preferences
Enable storing these preferences locally.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In analogy to the trash-icons, cache a small rendered version of
the edit icon. This will be used in the dive-site table. Rename
the icon alias from "duplicate-edit-icon" to "edit-icon", as
it actually is not a duplicated. The other "edit" icon is an
"undo" icon!
Move the accessor functions to cleanertablemode.cpp. This is not
the ideal place, but since the functions are declared in
cleanertablemodel.h it's certainly better than the old place
(models.cpp)!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This import is based on one sample I received. It was exported from some
Mares software. Imported data is somewhat limited, but we do get the
depth and temperature profiles. (I would love to receive some more
sample logs to validate the import and to enhance the data we are
grabbing.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
The info box can get longish. Offer the user to turn
off display of deco information (surface GF and
individual ceilings).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Remove from:
- unit tests
- desktop widgets
- preferences
- core intergration
- cmakefiles
- build scripts
- icons
- docs
Also remove the plugins and social network integration.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Extract thumbnails using ffmpeg.
Behavior is controlled by three new preferences fields:
- extract_video_thumbnails (bool): if true, thumbnails are calculated.
- extract_video_thumbnail_position (int 0..100): position in video
where thumbnail is fetched.
- ffmpeg_executable (string): path of ffmpeg executable.
If ffmpeg refuses to start, extract_video_thumbnails is set to false
to avoid unnecessary churn.
Video thumbnails are marked by an overlay.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Import an "unknown-type" icon from the KDE breeze theme, which is
licensed under the LGPL. This icon will be shown for file for which
we couldn't determine whether this is a picture or a video.
Source: https://github.com/KDE/breeze-icons
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Import a video icon from the KDE breeze theme, which is licensed
under the LGPL. This icon will be used as a dummy-placeholder
for video files.
Source: https://github.com/KDE/breeze-icons
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
remove mapWidget entries from subsurface.qrc, and
add reference to map-widget.qrc in CMakelist.txt
Android uses the same CMakelist.txt
Signed-off-by: Jan Iversen <jani@apache.org>
|
|
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
|
|
Import a camera icon from the KDE breeze theme, which is licensed
under the LGPL. Use this icon to display not-yet-loaded images
in the photos tab and the profile.
Source: https://github.com/KDE/breeze-icons
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Add an exclamation mark in the gas change icons if
the change violates our isobaric counter diffusion
criterium.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
This reverts commit 92e9c6606f6ef3ad16d2e31f9f9a8f5fa14f2c1a.
|
|
This reverts commit ef38d15c2b015d25c95cf902f91c3eebf9e2e251.
|
|
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
|
|
Move all the map widget platform agnostic files to the
<subsurface-root>/map-widget folder.
This avoids the confusion about the desktop version of subsurface
using mobile components. The map widget is planned as a shared
component between the mobile and desktop versions.
desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific
to the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
When trying to trace down an unrelated issue with flag icons, I realized
that these two are no longer used. They were part of our Marble setup.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
If the QML modules for QtLocation and QtPositioning are
missing the QML in mapwidget.cpp will fail to load,
which can lead to crashes.
To solve the issue check if the QML has loaded and set
a flag 'isReady' to true. If the loading has failed
load another QML which is for showing a red error text
in the lines of `MapWidget.qml failed to load!`.
If the map QML has failed, use a macro in all relevant
MapWidget members to turn them into a NOP. This approach
leaves the rest of the codebase intact - e.g. no checks
in classes which connect to the MapWidget class.
Fixes #596
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Otherwise it's not shown on the divesite edit page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The buttons are positioned bellow the "toggle map type" button
and increment / decrement the zoom by "zoomStep" (2 for now).
Also clamp the zoom-in level to "map.maximumZoomLevel".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
- add the PNG file into the QRC
- add a simple scale animation for the Image on click
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This QML component will be used to provide a context menu for the
QML map widget. Include the file in QRC and test it's creation
in MapWidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Apparently, if it's required to import a QML component inside any QML
file from resource, the compoment QRC alias has to have the same name
as the component - e.g. add QRC alias MapWidgetContextMenu.qml allows
creating a MapWidgetContextMenu compoment inside MapWidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The QML based map will have a toggle in the top left corner to toggle
between the satellite and steet tiles.
The images are created specifically for use in this Qt Location widget
and are free for use in Subsurface.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Use a "mapwidget-" prefix for both the QRC and the file names.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The image for the unselected marker is now a slightly darker flag.
Same behaviour as the current Marble implementation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
These are part of the mobile-widgets folder for now, with the
idea that they will be used in the mobile version as well.
Eventually they can be moved into a shared-widgets folder.
The QRC file uses aliases for them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
|
|
|
|
Defaults and language icons were missing, and graph/profile
icon was not readable.
All icons except "language.png" were taken from Google's
Material Design Icon pack which is distributed under Apache 2.0 license
(see https://github.com/google/material-design-icons)
Language icon is from http://languageicon.org site. If their
license isn't permissive enough, then we can switch to a language icon
from Material Design pack (globe).
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
Berthold Stoeger
Willem Ferguson
Miika Turkia
Robert C. Helling
Lubomir I. Ivanov
jan Iversen
Dirk Hohndel
Martin Měřinský
Stefan Fuchs
Anton Lundin
Sergey Starosek