| Age | Commit message (Collapse) | Author |
|---|
|
As we join LOCATION with SITE on divelogs.de import using slash (/) as a
separator, we might as well split on last slash on export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let's use the same assumption for working pressure (where not defined)
as the origin uses.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were missing the import of cylinders' working pressure when syncing
with divelogs.de. This piece of information is required for proper unit
conversions when user uses imperial units for displaying the
dive information. (Both Subsurface and divelogs.de use metric
internally, or at least the export from divelogs.de is in metric.)
See #907
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Rounding always up should give us sensible sample interval as EON Steel
adds extra samples.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The logic to select samples from EON Steel for divelogs.de export is the
following:
- Ignore sample at time zero, as that is surface, and the second "odd"
sample contains information we are interested in
- Grab the second sample, first sample with pressure and temperature
readings
- Grab the third sample - "grand parent" is 0, thus our first interval
sample
- Grab the samples when the predecessor (or grand parent) is at least 10
seconds away
This logic seems to produce reasonable results when exporting EON Steel
logs to divelogs.de. Naturally there might be corner cases, that are not
taken into account, but this basic logic seems reasonable in normal
cases. (Unfortunately analysis is done based on a single dive.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This sets the Suunto EON Steel sample interval to 10 seconds when
exporting to divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will export the cylinder information to divelogs.de also if there
is a pressure drop of at least 5 bars. (Previously only a gas switch to
the gas triggered the export of that particular cylinder.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This attempts to export only used cylinders to divelogs.de. The
detection is based only on o2 percentage as per our test dives. However,
the new cylinder id would be better, but that does not exist on old
dives.
Fixes #757
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
All recorded cylinders are exported to divelogs.de. This potentially
includes cylinders that have not been used.
The start and end pressure for additional cylinders is taken from the
cylinder information. Main tank gets this information from first and
last pressure reading or from the cylinder information if samples are
not available. This should be ok when there is only one cylinder with
pressure sensor, but does not probably work for people having multiple
sensors.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the cylinder description starts with D%d we test if the size in
description matches the cylinder size. If the cylinder size is double
compared to size in description, we mark the dive as double tank dive to
divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Logic when to use default sample interval was mixed.
Fixes #657
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The wrong O2 percentage was due to not referring to the correct cylinder
but grabbing any o2 value in any cylinder. While fixing this, I noticed
that also end pressure was missing the cylinder selection, so fixing
that as well.
Fixes #626
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Most dive computers start always with the first cylinder (and if not,
they give a gas switch in the first few seconds). Trying to follow this
principle on divelogs.de export.
The bug 626 sounds like a bit different case so a sample XML log would
be needed to ensure that use case gets fixed.
See #626
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Crafting depth samples produced a negative depth for the last sample.
This patch checks that negative last sample is ignored. (This occurred
when last manual sample is not full minutes.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch creates artificial depth samples for manually entered dives
every 60 seconds. This is used for export to divelogs.de.
Fixes #486
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixes #439
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After change to include XSLT files in resources, the import quit
working (even though the files and templates were found properly). This
patch uses include statement instead as it seems to work in our case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let's use the shiny new UTF-8 encoding on divelogs.de export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While working on UDDF export I noticed that the grabbing of last
sample pressure was not working properly. This will fix it for DLD
export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We grab the pressure information from samples, if available. Otherwise,
we use information from first cylinder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to have CDATA around text fields to support e.g. Cyrillic
alphabet.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The resulting divelogs.de formatted XML is then to be zipped and
uploaded to divelogs.de website.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Miika Turkia