:icons: :toc: :toc-placement: manual :numbered: image::mobile-images/banner.jpg["Banner", align="center"] [big]#MANUEL UTILISATEUR de Subsurface-mobile# *Auteurs du manuel* : Willem Ferguson, Dirk Hohndel toc::[] [blue]#_Version 2, juillet 2017_# Welcome as a user of _Subsurface_, advanced dive logging software with extensive infrastructure to describe, organize, interpret and print scuba and free dives. _Subsurface_ offers many advantages over other similar software solutions, including compatibility with Windows, Mac-OS/X, Linux (many distributions), Android and iOS. In addition, _Subsurface_ is open-source software that allows downloading dive information from most dive computers. Présentation de Subsurface-mobile --------------------------------- _Subsurface-mobile_ est une extension de _Subsurface_ qui fonctionne sur les smartphones Android et iOS et sur les tablettes. C'est un outil pour visualiser et partager des informations de plongées sur des sites de plongées où un ordinateur n'est pas utile. _Subsurface-mobile_ permet également de collecter des positions GPS où sont effectuées les plongées. (Subsurface-mobile pour iOS ne supporte pas toutes les fonctions pour le moment). _Subsurface-mobile_ allows you to enter and save dive information using a mobile device. Users of _Subsurface-mobile_ typically use the mobile app as an extension to the laptop/desktop version of _Subsurface_ that allows the storage of dive logs on the Internet and sharing them between the mobile and the desktop versions. But _Subsurface-mobile_ can also be used independently of _Subsurface_ and does not require the use of cloud storage. While the desktop version of _Subsurface_ shows much more detailed information for each dive, the mobile version allows a more accessible dive log on a dive trip, useful for proving dive experience to dive shops or to review previous dives. _Subsurface-mobile_ allows you to: - Download existing dive log information from the Internet. - View this information on a mobile device. - Edit many of the dive log data fields, e.g. divemaster, buddy, equipment or notes about a dive. - Manually create and add new dive records to your dive log. - Download dive data directly from many dive computers. - Store the updated dive log in the _Subsurface_ cloud storage. - Record, store and apply GPS positions of dives (Android only). - View the localities of recorded GPS positions and of dives on a map. These items are discussed in greater detail in the following text. _Subsurface-mobile_ does not yet support download of dive data from all the dive computers that the desktop/laptop version can: that still needs to be done using _Subsurface_ on a desktop or laptop computer. Only a subset of dive computers that use a FTDI USB interface or a Bluetooth/BTLE interface are accessible by _Subsurface-mobile_. == Installing _Subsurface-mobile_ on your mobile device Find _Subsurface-mobile_ in the _Google Play Store_ or the _iTunes Store_ and install it. == Using _Subsurface-mobile_ for the first time Upon starting _Subsurface-mobile_ for the first time, a Subsurface splash screen is shown while the program loads. On some devices this may take several seconds. After loading, the _Cloud Credentials screen_ appears (see image below on left). Select whether _Subsurface-mobile_ should access the Internet for dive log information as follows: === When NOT Using Cloud Storage Tap the striked-out cloud icon. The app will not access the _Subsurface_ cloud storage server to obtain dive log information. This means that dive log information is stored on the mobile device only. === Using Cloud Storage In order to use the _Subsurface_ cloud storage, an account on the cloud server is required. If you have already set up an account from the _Subsurface_ desktop application, enter the credentials here. You can also create a new cloud storage account from your mobile device. ==== Using the desktop version of _Subsurface_: Open the desktop version of _Subsurface_ and click _File -> Preferences -> Network_, explained in detail in the https://subsurface-divelog.org/documentation/subsurface-4-user-manual/#\_create_a_cloud_storage_account[user manual for the _Subsurface_ desktop version]. Once the account has been created and verified using the desktop version, _Subsurface_ desktop alows you to download dive information from dive computers and store this on the cloud which can, in turn, be downloaded to _Subsurface-mobile_. _Subsurface-mobile_ attempts to download the existing dive log from the _Subsurface_ cloud server. Appropriate messages are shown onscreen. Finally a list of dives is shown. Once the dive list has been downloaded from the Internet, _Subsurface-mobile_ keeps a local copy on the mobile device. This means that even if there is no Internet connection at a dive site, you can still access the local copy and view and manipulate dive information. If there is Internet connectivity, _Subsurface-mobile_ accesses the cloud-based dive log to verify that the local copy is still the same as the Internet-stored copy. If not, the local copy and the copy on the server are synchronised. image::mobile-images/Credentials.jpg["FIGURE: Mobile landing screen", align="center"] ==== Using _Subsurface-mobile_: Enter an e-mail address and a password in the fields indicated on the screen. The e-mail should be in lower case and the password should contain a combination of letters from the alphabet (upper and lower case) and/or numbers. When entering a password, it is possible to check a checkbox that enables the text of the password to be shown (image on left, above). At this stage, the red message "Cannot connect to cloud storage" appears on the screen. This is normal because a valid PIN has not yet been provided (image on left, above). Tap the Disk (Save) icon at the bottom of the screen. A PIN is sent to the e-mail address provided. Enter the PIN into the field indicated and tap the _Save_ icon again. The user information is stored on the cloud server and access to the cloud is enabled. The dive list is initially empty. Start entering dives in the dive log or download dive information from either a _Subsurface_ cloud storage account or from a dive computer. == Menu Structure and User Interface At the bottom of many Subsurface-mobile screens is a round button that provides for several actions and which allows the selection of the main affirmative action (see image above and image below). On Android devices, use the Android Back button for "cancel", "discard" or "back" actions. For example, when editing dive information, tapping the action button saves the changes while the Android back button can be used to cancel the edit without saving changes. On iOS devices, on screens where a "back" action is enabled, a back arrow is shown in the top left corner of the screen. image::mobile-images/actionbutton.jpg["FIGURE: Action Button", align="center"] In order to have a consistent experience between iOS and Android, _Subsurface-mobile_ on Android does not use the traditional "hamburger" menu button in the top left or right corner of the screen to open menus. Instead, _Subsurface-mobile_ uses a different user interaction philosophy based on the Kirigami framework developed by the Plasma developers. There are three ways to open the main menu: - Tap the "hamburger" symbol in the lower left corner of the screen (easy to reach for hand held devices) - Swipe towards the right across the left edge of the screen - Drag the action button visible on most screens to the right image::mobile-images/MainMenu2.jpg["FIGURE: Dive management subpanel", align="center"] The images above indicate some of the important features of the menu system. On the left is the main menu, activated as described above. On the right, above, is a representation of the menu items of all the submenus accessible from the main menu: the main menu items are shown on the left while the submenu contents are shown on a blue background on the right. All screenshots in this user manual are currently from the Android version. As indicated earlier, the iOS version currently doesn't support _GPS_ features. == Viewing the Dive List Most of the actions of _Subsurface-mobile_ center around the dives on the dive list. While the dive list is loading from the cloud, a message appears at the bottom of the screen, indicating that the cloud is being accessed. Once the list is loaded you can scroll up and down. Tapping a dive on the list brings up a display of _Details View_ for that dive (see image on right below). This includes the dive profile as well as additional information and notes. image::mobile-images/DiveList.jpg["FIGURE: Dive list screen", align="center"] You can view other dives by swiping the _Details view_ to the right (for the previous dive) or to the left (following dive). Using the Action Bar, it is also possible to delete the dive (tap the dustbin on the Action Bar) or to view the dive location on a map viewer (Google Maps on Android, the Google Maps web site on iOS; tap the GPS icon on the Action Bar.). [[S_Edit_Dive]] == Editing dive details At the bottom of the dive details screen the _Action Button_ contains a pencil (image on right, above). Tapping the pencil button brings up a panel with edit boxes that allows you to change the existing dive information, e.g. adding text to the dive notes or changing the names or values of some of the information (see image below). It may be necessary to scroll the window to access all the information. At the bottom of the edit screen is a _Save_ action button. Tap this to save the new information. Having saved the data, the dive list screen is updated and shown. To cancel any edits, tap the Android Back Button or swipe the edit screen up (fling it away). image::mobile-images/EditDive.jpg["FIGURE: Dive edit screen", align="center"] [[S_Add_Dive]] == Adding a new dive to the dive list You can manually add a dive to the existing dive list. On the dive list tap the "plus" sign in the _Action Button_, or use the main menu and tap _Manage dives -> Add dive manually_. This opens a screen that is identical to the editing screen discussed above. When a dive is added manually, you cannot directly add a dive profile from a dive computer. However, if you do not use a dive computer, the duration, depth and several other bits of information about the new dive can be entered. The _Action button_ at the bottom of the screen contains a disk symbol. Tap this to save the new dive. To cancel any edits, tap the Android Back Button. The left-hand image below shows a screenshot of a dive being created and the right-hand image shows the same dive in _Details View_. image::mobile-images/ManuallyEnterDive.jpg["FIGURE: Manual dive entry screen", align="center"] == Deleting a dive The _Details View_ of a dive has an Action Bar, including a dustbin. If this is tapped, the dive shown in the _Details View_ is deleted. You have a brief opportunity to undo the delete by tapping the grey _Undo_ button in the message that appears at the bottom of the screen (see image below). image::mobile-images/Delete_undo.jpg["FIGURE: Undo delete dive", align="center"] You can also delete a dive from the dive list by long-pressing a specific dive until a red dustbin appears on the right-hand side (see image below). Tap the dustbin. The dive is deleted without asking any confirmation because _Subsurface-mobile_ assumes that the combination of a long tap on the dive with another tap on the red dustbin is an unambiguous instruction to delete the dive. image::mobile-images/RedDustbin.jpg["FIGURE: delete dive from list", align="center"] == Download dives from a dive computer Download of dives is possible from dive computers with a FTDI USB interface, or with a Bluetooth interface. First, establish a link between the dive computer and the mobile device. For USB dive computers, USB cables "normally" used for uploading dives to a desktop/laptop computer do NOT work: these cables often have a full-sized male USB plug on one end which plugs into the USB port of a desktop/laptop computer. For downloads to a mobile device one needs a USB OTG (USB On-The-Go) cable. In most cases it is required to plug the USB cable "normally" used with the dive computer into a USB OTG cable which, in turn, plugs into the mini-USB receptacle of the mobile device. The OTG cable often has a full-size female receptacle at one end which accommodates the full-sized male plug of the USB cable "normally" used (see image below). This means that two cables are used to connect the dive computer to the mobile device. image::mobile-images/USB-OTG.jpg["FIGURE: USB-OTG cable", align="center"] For Bluetooth-equipped dive computers, establish a Bluetooth connection between the dive computer and the mobile device. Use the tools on the mobile device to achieve this. For of Android mobile devices, the Settings -> Bluetooth tool is probably appropriate. Ensure pairing of the dive computer and mobile device. _Subsurface-mobile_ performs communication using both Bluetooth and Bluetooth-low-energy (BTLE). The appropriate choice of Bluetooth communication is made by the software and the user need not be concerned with this. With propper communication between dive computer and _Subsurface-mobile_ having been set up, dive download is simple. From the main menu, tap _Manage dives -> Download from DC_. A screen is shown requiring that the user specify the names of the vendor and model of the dive computer. For instance, when using a Shearwater Petrel 2 dive computer, the vendor is _Shearwater_ and the Dive computer name is _Petrel 2_. From the two dropdown lists at the top of the screen, select the correct vendor and dive computer names (see image on the left, below). If using a dive computer using a Bluetooth connection, then tap the check box labelled _Bluetooth download_. Now tap the button labled _DOWNLOAD_. The downloaded dives appear in the bottom part of the screen, the most recent dive at the top (see image on right, below). Be patient because the download can sometimes take a few mimnutes. Each dive has a check-box on the left hand side, used for selecting which dives need to be added to the _Subsurface-mobile_ dive list: dives that are not checked are ignored. With the appropriate downloaded dives having been checked, tap the button at the bottom left labled _ACCEPT_. All the selected dives appear on the _Subsurface-mobile_ dive list. The downloaded dive information can now be edited as described in the section above xref:S_Edit_Dive[Edit a dive]. image::mobile-images/DC-Download.jpg["FIGURE: DC download screen", align="center"] == Viewing the dive location on Google Maps The site of a specific dive can be viewed in two ways using the _Details View_. The Action Bar at the bottom has a GPS pin on the left hand side. Tap that pin and the dive site is shown in Google Maps. Close Google Maps by using the Android _Back_ button. Alternatively, the _Details View_ has a button at the top right hand marked _Map it_. Tap this button to open Google Maps showing the dive site. image::mobile-images/Map.jpg["FIGURE: Map of dive site", align="center"] == Dive log management A central part of _Subsurface-mobile_ is the ability to store the dive log using the _Subsurface_ cloud storage. This provides security against loss or damage to the dive information contained in a local copy of the dive log and allows the desktop version of _Subsurface_ to access changes made using the mobile device. This ability is accessed through the main menu (by dragging the Action Button to the right, or alternatively tapping the "Hamburger" icon at the bottom left of the screen). Tap the option _Manage dives_, enabling a number of options: === Add new dive manually This is described above under the section dealing with xref:S_Add_Dive[Adding a new dive to the dive list]. === Sync the dive log with the _Subsurface_ cloud storage Upload the dives contained on the mobile device to the _Subsurface_ cloud storage by tapping the option _Manual sync with cloud_. This synchronizes the local changes to the dive log with the cloud storage. It also downloads changes made to the dive log using another device or computer and stored in cloud storage. === Working offline or online By default _Subsurface-mobile_ runs offline and only syncs the dive list with cloud storage when explicily told to do so (see above). You can choose to always sync with the cloud servers after every modification of the dive list. This is not recommended unless you are in an area with fast and reliable internet connection, as otherwise _Subsurface-mobile_ might appear to hang between operations as it tries to connect to the cloud server. === Changing the login credentials on the _Subsurface_ cloud The login credentials (for example to work with multiple accounts) can be changed by opening the main menu and by tapping _Settings -> Cloud credentials_. This opens the screen for specifying new credentials. === Changing the colour scheme of _Subsurface-mobile_ _Subsurface-mobile_ has three colour schemes to please users with different tastes. This user manual shows the default colour scheme, comprising blue colours. Change to a pink or a dark colour scheme by opening the main menu and tap Settings -> Preferences. This opens the Preferences screen that includes the three colour schemes (see image below). image::mobile-images/ColourSchemes.jpg["FIGURE: Colour scheme setup screen", align="center"] == Recording dive locations using GPS (Android only). The fact that most smartphones have GPS facilities allows _Subsurface-mobile_ on Android to record the locations of dives. You can take the smartphone on the dive boat during a dive and locations will be automatically recorded at regular intervals. These locations can then be applied to dives in the dive list. Here is how it's done: === Setting up the GPS Open the main menu and tap _GPS -> Preferences_. Now specify the way in which GPS data need to be automatically collected (image above). Data are collected at regular intervals, e.g. every 5 minutes, or at regular distances, e.g. after the boat has moved more than 200m, or a combination of both of these approaches. Provide the appropriate information and tap the _Save_ action button. The program is now ready to collect GPS positions. === Collecting GPS positions image::mobile-images/Mainmenu.jpg["FIGURE: Main menu", align="center"] Ensure that the GPS on the Android device has been activated. At the bottom of the GPS submenu is a check box _Run location service_ (image above). Check this box and _Subsurface-mobile_ starts to collect GPS locations automatically, following the preferences specified as described above. After return from the dive trip you can deactivate the collection of GPS data by de-activating the same check box at the bottom of the main menu. === Storing the GPS data on the _Subsurface_ cloud Activate the main menu and select the _GPS_ option that brings up the submenu of GPS-related actions. Tap _Upload GPS data_ that saves the GPS data on the _Subsurface_ cloud server. These GPS data are saved *separately* from the other dive log data. All collected GPS data are kept on the Android device, independent of whether they have been uploaded or not. === Downloading GPS data from the _Subsurface_ cloud Download the GPS data that have been saved on the cloud (possibly by a different device) by selecting _Download GPS Data_ from the GPS subpanel. === Viewing GPS data From the GPS submenu select _Show GPS fixes_. This brings up a list of GPS positions obtained using the location service (image on left, below). Two actions are possible for each of the locations, enabled if you tap the handle (the three horisontal stripes on the right, see image on left, below) and then drags the specific item to the left (image on right, below). This exposes two options. Tapping the dustbin deletes this particular GPS location. Tapping the teardrop-shaped icon (actually a Google Maps pin) opens up Google Maps with a pin indicating the exact map position of the GPS record being viewed. The two above options can be hidden by drawing the GPS record to the right, again using the handle. image::mobile-images/gpsmanagement.jpg["FIGURE: GPS management", align="center"] === Applying GPS data to dives in the dive log Assuming that all the dives have been entered into the dive log or have been downloaded from the _Subsurface_ cloud, you can apply the GPS positions to these dives. GPS positions can therefore only be applied to dives in the dive list. From the GPS subpanel, tap _GPS-tag dives_. The dive list contains the start and end times of each dive. Now, _Subsurface-mobile_ applies the first GPS position that falls within the dive period of each dive. This results in a GPS position for each dive that is saved as part of the dive log.