BtDeviceSelectionDialog Remote Bluetooth device selection Remote Bluetooth device selection Discovered devices Discovered devices Save Save Quit Quit Scan Scan Clear Clear Local Bluetooth device details Local Bluetooth device details Name: Name: Address: Address: Bluetooth powered on Bluetooth powered on Turn on/off Turn on/off Select device: Select device: Name: Name: Trying to turn on the local Bluetooth device... Trying to turn on the local Bluetooth device... Trying to turn off the local Bluetooth device... Trying to turn off the local Bluetooth device... Scanning for remote devices... Scanning for remote devices... Scanning finished successfully. Scanning finished successfully. UNPAIRED UNPAIRED PAIRED PAIRED AUTHORIZED_PAIRED AUTHORISED_PAIRED %1 (%2) [State: %3] %1 (%2) [State: %3] The device %1 can be used for connection. You can press the Save button. The device %1 can be used for connection. You can press the Save button. The device %1 must be paired in order to be used. Please use the context menu for pairing options. The device %1 must be paired in order to be used. Please use the context menu for pairing options. The local device was changed. The local device was changed. Pair Pair Device %1 was paired and is authorized. Device %1 was paired and is authorised. Could not initialize Winsock version 2.2 Could not initialize Winsock version 2.2 Remote devices list was cleared. Remote devices list was cleared. The local Bluetooth device was %1. %1 will be replaced with "turned on" or "turned off" The local Bluetooth device was %1. turned on turned on turned off turned off Remove pairing Remove pairing Trying to pair device %1 Trying to pair device %1 Trying to unpair device %1 Trying to unpair device %1 Device %1 was unpaired. Device %1 was unpaired. Device %1 was paired. Device %1 was paired. The device %1 can now be used for connection. You can press the Save button. The device %1 can now be used for connection. You can press the Save button. Local device error: %1. Local device error: %1. Pairing error. If the remote device requires a custom PIN code, please try to pair the devices using your operating system. Pairing error. If the remote device requires a custom PIN code, please try to pair the devices using your operating system. Unknown error Unknown error The Bluetooth adaptor is powered off, power it on before doing discovery. The Bluetooth adaptor is powered off, power it on before doing discovery. Writing to or reading from the device resulted in an error. Writing to or reading from the device resulted in an error. An unknown error has occurred. An unknown error has occurred. Device discovery error: %1. Device discovery error: %1. Not available Not available The local Bluetooth adapter cannot be accessed. The local Bluetooth adapter cannot be accessed. The device discovery agent was not created because the %1 address does not match the physical adapter address of any local Bluetooth device. The device discovery agent was not created because the %1 address does not match the physical adapter address of any local Bluetooth device. BuddyFilter Person: Person: Searches for buddies and divemasters Searches for buddies and divemasters BuddyFilterModel No buddies No buddies ColumnNameProvider Dive # Dive No. Date Date Time Time Duration Duration Location Location GPS GPS Weight Weight Cyl. size Cyl. size Start pressure Start pressure End pressure End pressure Divemaster Divemaster Buddy Buddy Notes Notes Tags Tags Air temp. Air temp. Water temp. Water temp. Max. depth Max. depth Avg. depth Avg. depth Suit Suit O₂ O₂ He He Sample time Sample time Sample depth Sample depth Sample temperature Sample temperature Sample pO₂ Sample pO₂ Sample CNS Sample CNS Sample NDL Sample NDL Sample TTS Sample TTS Sample stopdepth Sample stopdepth Sample pressure Sample pressure Sample sensor1 pO₂ Sample sensor1 pO₂ Sample sensor2 pO₂ Sample sensor2 pO₂ Sample sensor3 pO₂ Sample sensor3 pO₂ Sample setpoint Sample setpoint ConfigureDiveComputer Could not save the backup file %1. Error Message: %2 Could not save the backup file %1. Error Message: %2 Could not open backup file: %1 Could not open backup file: %1 Dive computer details read successfully Dive computer details read successfully Setting successfully written to device Setting successfully written to device Device firmware successfully updated Device firmware successfully updated Device settings successfully reset Device settings successfully reset Unable to create libdivecomputer context Unable to create libdivecomputer context Could not a establish connection to the dive computer. Could not a establish connection to the dive computer. ConfigureDiveComputerDialog Configure dive computer Configure dive computer Device or mount point Device or mount point ... ... Retrieve available details Retrieve available details Save changes to device Save changes to device Backup Backup Restore backup Restore backup Update firmware Update firmware Cancel Cancel OSTC 3 OSTC 3 Basic settings Basic settings Serial No. Serial No. Firmware version Firmware version Custom text Custom text Language Language English English German German French French Italian Italian Dive mode Dive mode OC OC CC CC Gauge Gauge Apnea Apnea Date format Date format MMDDYY MMDDYY DDMMYY DDMMYY YYMMDD YYMMDD Saturation Saturation % % Desaturation Desaturation Last deco Last deco m m Brightness Brightness Eco Eco Medium Medium High High Sampling rate Sampling rate 2s 2s 10s 10s Units Units m/°C m/°C ft/°F ft/°F Dive mode color Dive mode colour Standard Standard Red Red Green Green Blue Blue Salinity (0-5%) Salinity (0-5%) Sync dive computer time with PC Sync dive computer time with PC Compass gain Compass gain Read settings from backup file or from device before writing to the device Read settings from backup file or from device before writing to the device Read settings from backup file or from device before writing to a backup file Read settings from backup file or from device before writing to a backup file OSTC, Mk.2/2N/2C OSTC, Mk.2/2N/2C 230LSB/Gauss 230LSB/Gauss 330LSB/Gauss 330LSB/Gauss 390LSB/Gauss 390LSB/Gauss 440LSB/Gauss 440LSB/Gauss 660LSB/Gauss 660LSB/Gauss 820LSB/Gauss 820LSB/Gauss 1090LSB/Gauss 1090LSB/Gauss 1370LSB/Gauss 1370LSB/Gauss Show safety stop Show safety stop Reset device to default settings Reset device to default settings Alt GF can be selected underwater Alt GF can be selected underwater Suunto Vyper family Suunto Vyper family Advanced settings Advanced settings Future TTS Future TTS Pressure sensor offset Pressure sensor offset GFLow GFLow GFHigh GFHigh Decotype Decotype mbar mbar min min ZH-L16 ZH-L16 Connect via Bluetooth Connect via Bluetooth Save libdivecomputer logfile Save libdivecomputer logfile Left button sensitivity Left button sensitivity Always show ppO2 Always show pO₂ ZH-L16+GF ZH-L16+GF Alt GFLow Alt GFLow Alt GFHigh Alt GFHigh Flip screen Flip screen Right button sensitivity Right button sensitivity Graphical speed indicator Graphical speed indicator Bottom gas consumption Bottom gas consumption Deco gas consumption Deco gas consumption Gas settings Gas settings %He %He Type Type Change depth Change depth Gas 1 Gas 1 Gas 2 Gas 2 Gas 3 Gas 3 Gas 4 Gas 4 Gas 5 Gas 5 Dil 1 Dil 1 Dil 2 Dil 2 Dil 3 Dil 3 Dil 4 Dil 4 Dil 5 Dil 5 Set point [cbar] Set point [cbar] Change depth [m] Change depth [m] SP 1 SP 1 SP 2 SP 2 SP 3 SP 3 SP 4 SP 4 SP 5 SP 5 Fixed setpoint Fixed setpoint Sensor Sensor Setpoint fallback Setpoint fallback cbar cbar P1 (medium) Suunto safety level P1 (medium) P2 (high) Suunto safety level P2 (high) Total dive time Total dive time kg/ℓ kg/ℓ Apnoea Apnoea Safety level Safety level Connect Connect Disconnect Disconnect OSTC 3,Sport,Cr,2 OSTC 3,Sport,Cr,2 MOD warning MOD warning Dynamic ascent rate Dynamic ascent rate ℓ/min ℓ/min %O₂ %O₂ Setpoint Setpoint O₂ in calibration gas O₂ in calibration gas pO₂ max pO₂ max pO₂ min pO₂ min Altitude range Altitude range Model Model Number of dives Number of dives Max depth Max depth P0 (none) Suunto safety level P0 (none) Sample rate Sample rate 20s 20s 30s 30s 60s 60s Computer model Computer model min min 24h 24h 12h 12h Time format Time format Imperial Imperial Metric Metric s s Light Light Depth alarm Depth alarm Time alarm Time alarm Salinity Salinity MM/DD/YY MM/DD/YY DD/MM/YY DD/MM/YY YY/MM/DD YY/MM/DD ZH-L16 CC ZH-L16 CC L16-GF OC L16-GF OC L16-GF CC L16-GF CC PSCR-GF PSCR-GF Backup files (*.xml) Backup files (*.xml) An error occurred while saving the backup file. %1 An error occurred while saving the backup file. %1 Backup succeeded Backup succeeded Your settings have been saved to: %1 Your settings have been saved to: %1 Backup dive computer settings Backup dive computer settings XML backup error XML backup error Restore dive computer settings Restore dive computer settings XML restore error XML restore error An error occurred while restoring the backup file. %1 An error occurred while restoring the backup file. %1 Restore succeeded Restore succeeded Your settings have been restored successfully. Your settings have been restored successfully. Select firmware file Select firmware file All files (*.*) All files (*.*) Choose file for divecomputer download logfile Choose file for divecomputer download logfile Log files (*.log) Log files (*.log) CylindersModel Type Type Size Size He% He% Work press. Work press. Start press. Start press. End press. End press. O₂% O₂% Switch at Switch at Use Use Clicking here will remove this cylinder. Clicking here will remove this cylinder. Cylinder cannot be removed Cylinder cannot be removed This gas is in use. Only cylinders that are not used in the dive can be removed. This gas is in use. Only cylinders that are not used in the dive can be removed. DiveComponentSelectionDialog Component selection Component selection Which components would you like to copy Which components would you like to copy Suit Suit Divemaster Divemaster Buddy Buddy Rating Rating Visibility Visibility Dive site Dive site Notes Notes Tags Tags Weights Weights Cylinders Cylinders DiveComputerManagementDialog Remove the selected dive computer? Remove the selected dive computer? Are you sure that you want to remove the selected dive computer? Are you sure that you want to remove the selected dive computer? Edit dive computer nicknames Edit dive computer nicknames DiveComputerModel Model Model Device ID Device ID Nickname Nickname Clicking here will remove this dive computer. Clicking here will remove this dive computer. DiveEventItem Manual switch to OC Manual switch to OC begin Starts with space! begin end Starts with space! end DiveImportedModel Date/time Date/time Duration Duration Depth Depth h: h: min min DiveItem # No. Date Date Rating Rating Depth(%1) Depth(%1) m m ft ft Duration Duration Temp(%1%2) Temp(%1%2) Weight(%1) Weight(%1) kg kg lbs lbs Suit Suit Cyl Cyl Gas Gas SAC(%1) SAC(%1) /min /min OTU OTU Max CNS Max CNS Location Location DiveListView Expand all Expand all Collapse all Collapse all Collapse others Collapse others Remove dive(s) from trip Remove dive(s) from trip Create new trip above Create new trip above Add dive(s) to trip immediately above Add dive(s) to trip immediately above Add dive(s) to trip immediately below Add dive(s) to trip immediately below Merge trip with trip above Merge trip with trip above Merge trip with trip below Merge trip with trip below Delete dive(s) Delete dive(s) Mark dive(s) invalid Mark dive(s) invalid Merge selected dives Merge selected dives Renumber dive(s) Renumber dive(s) Shift dive times Shift dive times Split selected dives Split selected dives Load image(s) from file(s) Load image(s) from file(s) Load image(s) from web Load image(s) from web Open image files Open image files Image files (*.jpg *.jpeg *.pnm *.tif *.tiff) Image files (*.jpg *.jpeg *.pnm *.tif *.tiff) DiveLocationModel Create a new dive site, copying relevant information from the current dive. Create a new dive site, copying relevant information from the current dive. Create a new dive site with this name Create a new dive site with this name DiveLogExportDialog Export format Export format UDDF UDDF Worldmap Worldmap I&mage depths I&mage depths Selection Selection Selected dives Selected dives All dives All dives HTML HTML Export dive log files Export dive log files General export General export Subsurface &XML Subsurface &XML di&velogs.de di&velogs.de DiveShare DiveShare CSV dive profile CSV dive profile CSV dive details CSV dive details CSV units CSV units Metric Metric Imperial Imperial General settings General settings Subsurface numbers Subsurface numbers Export yearly statistics Export yearly statistics All di&ves All di&ves Export list only Export list only Export photos Export photos Style options Style options Font Font Font size Font size 8 8 10 10 12 12 14 14 16 16 18 18 20 20 Theme Theme Light Light Sand Sand UDDF files (*.uddf *.UDDF) UDDF files (*.uddf *.UDDF) CSV files (*.csv *.CSV) CSV files (*.csv *.CSV) Generic format that is used for data exchange between a variety of diving related programs. Generic format that is used for data exchange between a variety of diving related programs. Comma separated values describing the dive profile. Comma separated values describing the dive profile. Comma separated values of the dive information. This includes most of the dive details but no profile information. Comma separated values of the dive information. This includes most of the dive details but no profile information. Send the dive data to divelogs.de website. Send the dive data to divelogs.de website. Send the dive data to dive-share.appspot.com website Send the dive data to dive-share.appspot.com website HTML export of the dive locations, visualized on a world map. HTML export of the dive locations, visualised on a world map. Subsurface native XML format. Subsurface native XML format. Write depths of images to file. Write depths of images to file. Export UDDF file as Export UDDF file as Export CSV file as Export CSV file as Export world map Export world map HTML files (*.html) HTML files (*.html) Export Subsurface XML Export Subsurface XML XML files (*.xml *.ssrf) XML files (*.xml *.ssrf) Save image depths Save image depths Export HTML files as Export HTML files as Please wait, exporting... Please wait, exporting... Can't open file %s Can't open file %s DiveLogImportDialog Import dive log file Import dive log file Time Time Metric Metric Imperial Imperial dd.mm.yyyy dd.mm.yyyy mm/dd/yyyy mm/dd/yyyy yyyy-mm-dd yyyy-mm-dd Drag the tags above to each corresponding column below Drag the tags above to each corresponding column below Dive # Dive No. Date Date Duration Duration GPS GPS Max. depth Max. depth Avg. depth Avg. depth Suit Suit Tags Tags O₂ O₂ He He Seconds Seconds Minutes Minutes Minutes:seconds Minutes:seconds Location Location Tab Tab Some column headers were pre-populated; please drag and drop the headers so they match the column they are in. Some column headers were pre-populated; please drag and drop the headers so they match the column they are in. Sample time Sample time Sample depth Sample depth Sample temperature Sample temperature Sample sensor1 pO₂ Sample sensor1 pO₂ Sample sensor2 pO₂ Sample sensor2 pO₂ Sample sensor3 pO₂ Sample sensor3 pO₂ Sample stopdepth Sample stopdepth Sample setpoint Sample setpoint Sample pO₂ Sample pO₂ Sample CNS Sample CNS Sample NDL Sample NDL Sample TTS Sample TTS Sample pressure Sample pressure Divemaster Divemaster Buddy Buddy Rating Rating Visibility Visibility Notes Notes Weight Weight Cyl. size Cyl. size Start pressure Start pressure End pressure End pressure Air temp. Air temp. Water temp. Water temp. DivePlanner Altitude Altitude Planned dive time Planned dive time ATM pressure ATM pressure Salinity Salinity mbar mbar m m kg/ℓ kg/ℓ DivePlannerPointsModel unknown unknown Final depth Final depth Run time Run time Duration Duration Used gas Used gas CC setpoint CC setpoint DivePlannerWidget Dive planner points Dive planner points Available gases Available gases Add dive data point Add dive data point Save new Save new DivePlotDataModel Depth Depth Time Time Pressure Pressure Temperature Temperature Color Colour Pressure S Pressure S pN₂ pN₂ pHe pHe pO₂ pO₂ Setpoint Setpoint Sensor 1 Sensor 1 Sensor 2 Sensor 2 Sensor 3 Sensor 3 Heart rate Heart rate Mean depth @ s Mean depth @ s Ambient pressure Ambient pressure Gradient factor Gradient factor Pressure I Pressure I User entered User entered Cylinder index Cylinder index Ceiling Ceiling SAC SAC DiveShareExportDialog Dialog Dialog User ID User ID ⌫ ⌫ Get user ID Get user ID <html><head/><body>⚠ Not using a UserID means that you will need to manually keep bookmarks to your dives, to find them again.</body></html> <html><head/><body>⚠ Not using a UserID means that you will need to manually keep bookmarks to your dives, to find them again.</body></html> Private dives will not appear in "related dives" lists, and will only be accessible if their URL is known. Private dives will not appear in "related dives" lists, and will only be accessible if their URL is known. Keep dives private Keep dives private Upload dive data Upload dive data <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Oxygen-Sans'; font-size:7pt; font-weight:600; font-style:normal;"> </body></html> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Oxygen-Sans'; font-size:7pt; font-weight:600; font-style:normal;"> </body></html> DiveTripModel # No. Date Date Rating Rating Depth Depth Temp Temp Weight Weight SAC SAC m m ft ft Weight(%1) Weight(%1) Suit Suit Cyl Cyl Gas Gas SAC(%1) SAC(%1) /min /min Max CNS Max CNS Location Location kg kg Depth(%1) Depth(%1) Duration Duration Temp(%1%2) Temp(%1%2) lbs lbs OTU OTU DivelogsDeWebServices no dives were selected no dives were selected failed to create zip file for upload: %s failed to create zip file for upload: %s internal error internal error Done Done Uploading dive list... Uploading dive list... Downloading dive list... Downloading dive list... Downloading %1 dives... Downloading %1 dives... Download finished - %1 Download finished - %1 Problem with download Problem with download The archive could not be opened: The archive could not be opened: Corrupted download Corrupted download The archive could not be opened: %1 The archive could not be opened: %1 Upload failed Upload failed Upload successful Upload successful Login failed Login failed Cannot parse response Cannot parse response Error: %1 Error: %1 Upload finished Upload finished DownloadFromDCWidget Error Error Retry Retry Find Uemis dive computer Find Uemis dive computer Download Download Choose Bluetooth download mode Choose Bluetooth download mode Choose file for divecomputer download logfile Choose file for divecomputer download logfile Log files (*.log) Log files (*.log) Warning Warning Saving the libdivecomputer dump will NOT download dives to the dive list. Saving the libdivecomputer dump will NOT download dives to the dive list. Choose file for divecomputer binary dump file Choose file for divecomputer binary dump file Dump files (*.bin) Dump files (*.bin) DownloadFromDiveComputer Vendor Vendor Download from dive computer Download from dive computer Device or mount point Device or mount point Choose Bluetooth download mode Choose Bluetooth download mode Dive computer Dive computer ... ... Force download of all dives Force download of all dives Always prefer downloaded dives Always prefer downloaded dives Select a remote Bluetooth device. Select a remote Bluetooth device. Download Download OK OK Cancel Cancel Downloaded dives Downloaded dives Select all Select all Unselect all Deselect all Save libdivecomputer logfile Save libdivecomputer logfile Save libdivecomputer dumpfile Save libdivecomputer dumpfile Download into new trip Download into new trip ExtraDataModel Key Key Value Value FacebookManager Photo upload sucessfull Photo upload sucessfull Your dive profile was updated to Facebook. Your dive profile was updated to Facebook. Photo upload failed Photo upload failed Your dive profile was not updated to Facebook, please send the following to the developer. Your dive profile was not updated to Facebook, please send the following to the developer. FilterWidget Form Form Text label Text label Filter this list Filter this list FilterWidget2 Reset filters Reset filters Show/hide filters Show/hide filters Close and reset filters Close and reset filters FirmwareUpdateThread This feature is not yet available for the selected dive computer. This feature is not yet available for the selected dive computer. Firmware update failed! Firmware update failed. GlobeGPS Edit selected dive locations Edit selected dive locations KMessageWidget &Close &Close Close message Close message LocationFilter Location: Location: LocationFilterDelegate (same GPS fix) (same GPS fix) (~%1 away (~%1 away , %1 dive(s) here) , %1 dive(s) here) (no existing GPS data, add GPS fix from this dive) (no existing GPS data, add GPS fix from this dive) (no GPS data) (no GPS data) Pick site: Pick site: LocationFilterModel No location set No location set LocationInformation GroupBox GroupBox Name Name Description Description Notes Notes Coordinates Coordinates Reverse geo lookup Reverse geolocation lookup ... ... Dive sites on same coordinates Dive sites on same coordinates Tags Tags Dive Site Dive site LocationInformationModel Create dive site with this name Create dive site with this name LocationInformationWidget Apply changes Apply changes Discard changes Discard changes Dive site management Dive site management Merge into current site Merge into current site Merging dive sites Merging dive sites You are about to merge dive sites, you can't undo that action Are you sure you want to continue? You are about to merge dive sites, you can't undo that action Are you sure you want to continue? You are editing a dive site You are editing a dive site MainTab Location Location Divemaster Divemaster Buddy Buddy Tags Tags Rating Rating Visibility Visibility Suit Suit Dive mode Dive mode Air temp. Air temp. Water temp. Water temp. Notes Notes General notes about the current selection General notes about the current selection Edit dive site Edit dive site ... ... Equipment Equipment Used equipment in the current selection Used equipment in the current selection Info Info Dive information Dive information Gases used Gases used Gas consumed Gas consumed CNS CNS Max. depth Max. depth Air pressure Air pressure Dive time Dive time Simple statistics about the selection Simple statistics about the selection Total time Total time Gas consumption Gas consumption All photos from the current selection All photos from the current selection Extra data Extra data Adittional data from the dive computer Adittional data from the dive computer Date Date Time Time Interval Interval SAC SAC Avg. depth Avg. depth OTU OTU Salinity Salinity Stats Stats Depth Depth Temperature Temperature Duration Duration Dives Dives Photos Photos Cylinders Cylinders Weights Weights Apply changes Apply changes Discard changes Discard changes Add cylinder Add cylinder Add weight system Add weight system Air temp. [%1] Air temp. [%1] Water temp. [%1] Water temp. [%1] This trip is being edited. This trip is being edited. Multiple dives are being edited. Multiple dives are being edited. This dive is being edited. This dive is being edited. Trip notes Trip notes Trip location Trip location /min /min Deepest dive Deepest dive Shallowest dive Shallowest dive Highest total SAC of a dive Highest total SAC of a dive Lowest total SAC of a dive Lowest total SAC of a dive Average total SAC of all selected dives Average total SAC of all selected dives Highest temperature Highest temperature Lowest temperature Lowest temperature Average temperature of all selected dives Average temperature of all selected dives Longest dive Longest dive Shortest dive Shortest dive Average length of all selected dives Average length of all selected dives These gases could be mixed from Air and using: These gases could be mixed from Air and using: and and New dive site New dive site Discard the changes? Discard the changes? You are about to discard your changes. You are about to discard your changes. MainWindow &File &File Export dive logs Export dive logs Toggle pHe graph Toggle pHe graph Toggle calculating all tissues Toggle calculating all tissues Toggle DC reported ceiling Toggle DC reported ceiling Toggle calculated ceiling Toggle calculated ceiling Toggle NDL, TTS Toggle NDL, TTS Toggle calculated ceiling with 3m increments Toggle calculated ceiling with 3m increments Configure &dive computer Configure &dive computer Toggle heart rate Toggle heart rate Toggle MOD Toggle MOD Toggle EAD, END, EADD Toggle EAD, END, EADD Toggle SAC rate Toggle SAC rate Toggle ruler Toggle ruler &Log &Log &View &View &Help &Help &Import &Import &Edit &Edit Share on Share on &New logbook &New logbook New New Ctrl+N Ctrl+N &Open logbook &Open logbook Open Open Ctrl+O Ctrl+O &Save &Save Save Save Ctrl+S Ctrl+S Sa&ve as Sa&ve as Save as Save as Ctrl+Shift+S Ctrl+Shift+S &Close &Close Close Close Ctrl+W Ctrl+W P&references P&references Import &GPS data from Subsurface web service Import &GPS data from Subsurface web service Edit device &names Edit device &names &Edit dive &Edit dive &Copy dive components &Copy dive components Ctrl+C Ctrl+C &Paste dive components &Paste dive components Ctrl+V Ctrl+V &Profile &Profile &Info &Info &All &All &Next DC &Next DC &About Subsurface &About Subsurface &Globe &Globe Ctrl+I Ctrl+I Import &from divelogs.de Import &from divelogs.de &Full screen &Full screen Toggle full screen Toggle full screen &Check for updates &Check for updates &Export &Export Ctrl+E Ctrl+E Ctrl+Shift+C Ctrl+Shift+C Edit &dive in planner Edit &dive in planner Toggle pO₂ graph Toggle pO₂ graph Toggle pN₂ graph Toggle pN₂ graph Scale graph Scale graph Toggle pictures Toggle pictures Toggle tank bar Toggle tank bar &Filter divelist &Filter divelist Toggle tissue graph Toggle tissue graph User &survey User &survey &Undo &Undo Ctrl+Z Ctrl+Z &Redo &Redo Ctrl+Shift+Z Ctrl+Shift+Z &Find moved images &Find moved images Open c&loud storage Open c&loud storage Save to clo&ud storage Save to clo&ud storage &Manage dive sites &Manage dive sites Dive Site &Edit Dive site &edit Facebook Facebook Ctrl+F Ctrl+F &Print &Print Ctrl+, Ctrl+, &Quit &Quit Import from &dive computer Import from &dive computer Ctrl+G Ctrl+G Ctrl++ Ctrl++ &Renumber &Renumber Ctrl+R Ctrl+R Ctrl+Y Ctrl+Y Ctrl+L Ctrl+L Ctrl+P Ctrl+P Ctrl+Q Ctrl+Q Ctrl+D Ctrl+D &Add dive &Add dive Auto &group Auto &group &Yearly statistics &Yearly statistics &Dive list &Dive list Ctrl+2 Ctrl+2 Ctrl+3 Ctrl+3 Ctrl+4 Ctrl+4 Ctrl+1 Ctrl+1 P&revious DC P&revious DC Left Left Right Right User &manual User &manual F1 F1 Ctrl+5 Ctrl+5 P&lan dive P&lan dive &Import log files &Import log files Import divelog files from other applications Import divelog files from other applications F11 F11 Open file Open file Cancel Cancel Traverse image directories Traverse image directories Scan Scan Scanning images...(this can take a while) Scanning images...(this can take a while) Please save or cancel the current dive edit before closing the file. Please save or cancel the current dive edit before closing the file. Please save or cancel the current dive edit before trying to add a dive. Please save or cancel the current dive edit before trying to add a dive. Print runtime table Print runtime table Trying to edit a dive that's not a manually added dive. Trying to edit a dive that's not a manually added dive. Do you want to save the changes that you made in the file %1? Do you want to save the changes that you made in the file %1? Do you want to save the changes that you made in the data file? Do you want to save the changes that you made in the data file? Save changes? Save changes? Save file as Save file as [cloud storage for] %1 [cloud storage for] %1 Opening datafile from older version Opening datafile from older version You opened a data file from an older version of Subsurface. We recommend you read the manual to learn about the changes in the new version, especially about dive site management which has changed significantly. Subsurface has already tried to pre-populate the data but it might be worth while taking a look at the new dive site management system and to make sure that everything looks correct. You opened a data file from an older version of Subsurface. We recommend you read the manual to learn about the changes in the new version, especially about dive site management which has changed significantly. Subsurface has already tried to pre-populate the data but it might be worth while taking a look at the new dive site management system and to make sure that everything looks correct. Open dive log file Open dive log file Dive log files (*.ssrf *.can *.csv *.db *.sql *.dld *.jlb *.lvd *.sde *.udcf *.uddf *.xml *.txt *.dlf *.apd*.SSRF *.CAN *.CSV *.DB *.SQL *.DLD *.JLB *.LVD *.SDE *.UDCF *.UDDF *.xml *.TXT *.DLF *.APD);;Cochran files (*.can *.CAN);;CSV files (*.csv *.CSV);;DiveLog.de files (*.dld *.DLD);;JDiveLog files (*.jlb *.JLB);;Liquivision files (*.lvd *.LVD);;MkVI files (*.txt *.TXT);;Suunto files (*.sde *.db *.SDE *.DB);;Divesoft files (*.dlf *.DLF);;UDDF/UDCF files (*.uddf *.udcf *.UDDF *.UDCF);;XML files (*.xml *.XML);;APD log viewer (*.apd *.APD);;Datatrak/WLog Files (*.log *.LOG);;OSTCtools Files (*.dive *.DIVE);;All files (*) Dive log files (*.ssrf *.can *.csv *.db *.sql *.dld *.jlb *.lvd *.sde *.udcf *.uddf *.xml *.txt *.dlf *.apd*.SSRF *.CAN *.CSV *.DB *.SQL *.DLD *.JLB *.LVD *.SDE *.UDCF *.UDDF *.xml *.TXT *.DLF *.APD);;Cochran files (*.can *.CAN);;CSV files (*.csv *.CSV);;DiveLog.de files (*.dld *.DLD);;JDiveLog files (*.jlb *.JLB);;Liquivision files (*.lvd *.LVD);;MkVI files (*.txt *.TXT);;Suunto files (*.sde *.db *.SDE *.DB);;Divesoft files (*.dlf *.DLF);;UDDF/UDCF files (*.uddf *.udcf *.UDDF *.UDCF);;XML files (*.xml *.XML);;APD log viewer (*.apd *.APD);;Datatrak/WLog Files (*.log *.LOG);;OSTCtools Files (*.dive *.DIVE);;All files (*) Contacting cloud service... Contacting cloud service... Changes will be lost if you don't save them. Changes will be lost if you don't save them. Warning Warning Please save or cancel the current dive edit before opening a new file. Please save or cancel the current dive edit before opening a new file. Trying to replan a dive that's not a planned dive. Trying to replan a dive that's not a planned dive. Yearly statistics Yearly statistics Subsurface XML files (*.ssrf *.xml *.XML) Subsurface XML files (*.ssrf *.xml *.XML) Please, first finish the current edition before trying to do another. Please, first finish the current edition before trying to do another. Open cloud storage Open cloud storage Save to cloud storage Save to cloud storage MultiFilter Filter shows %1 (of %2) dives Filter shows %1 (of %2) dives OstcFirmwareCheck You should update the firmware on your dive computer: you have version %1 but the latest stable version is %2 You should update the firmware on your dive computer: you have version %1 but the latest stable version is %2 Please start Bluetooth on your OSTC Sport and do the same preparations as for a logbook download before continuing with the update Please start Bluetooth on your OSTC Sport and do the same preparations as for a logbook download before continuing with the update Not now Not now Update firmware Update firmware Firmware upgrade notice Firmware upgrade notice Save the downloaded firmware as Save the downloaded firmware as HEX files (*.hex) HEX files (*.hex) PlannerSettingsWidget Open circuit Open circuit CCR CCR pSCR pSCR ft/min ft/min Last stop at 20ft Last stop at 20ft 50% avg. depth to 20ft 50% avg. depth to 20ft 20ft to surface 20ft to surface m/min m/min Last stop at 6m Last stop at 6m 50% avg. depth to 6m 50% avg. depth to 6m 6m to surface 6m to surface cuft/min cuft/min ℓ/min ℓ/min PreferencesDialog Defaults Defaults Units Units Graph Graph Language Language Network Network Facebook Facebook Georeference Georeference Font Font Font size Font size Dives Dives No default file No default file &Local default file &Local default file Clo&ud storage default file Clo&ud storage default file Local dive log file Local dive log file Use default Use default ... ... Animations Animations Speed Speed Clear all settings Clear all settings Reset all settings to their default value Reset all settings to their default value Unit system Unit system System System Connect to facebook text placeholder Connect to Facebook text placeholder Disconnect Disconnect Dive site geo lookup Dive site geo lookup Enable geocoding for dive site management Enable geocoding for dive site management Parse site without GPS data Parse site without GPS data Same format for existing dives Same format for existing dives Dive Site Layout Dive site layout / / Imperial Imperial Depth Depth meter metre feet feet bar bar psi psi cu ft cu ft celsius celsius fahrenheit fahrenheit kg kg CCR: show setpoints when viewing pO₂ CCR: show setpoints when viewing pO₂ CCR: show individual O₂ sensor values when viewing pO₂ CCR: show individual O₂ sensor values when viewing pO₂ Default CCR set-point for dive planning Default CCR set-point for dive planning pSCR O₂ metabolism rate pSCR O₂ metabolism rate pSCR ratio pSCR ratio ℓ/min ℓ/min 1: 1: UI language UI language System default System default Proxy Proxy Proxy type Proxy type Host Hostname Port Port Requires authentication Requires authentication Username Username Password Password Disconnect from Facebook Disconnect from Facebook Filter Filter Pressure Pressure Lists and tables Lists and tables Default dive log file Default dive log file Display invalid Display invalid Default cylinder Default cylinder Use default cylinder Use default cylinder Subsurface cloud storage Subsurface cloud storage Email address Email address Verification PIN Verification PIN New password New password Sync to cloud in the background? Sync to cloud in the background? Save Password locally? Save password locally? Subsurface web service Subsurface web service Default user ID Default user ID Save user ID locally? Save user ID locally? Volume Volume Temperature Temperature Weight Weight lbs lbs Time units Time units Minutes Minutes Seconds Seconds Show Show GFLow at max depth GFLow at max depth Misc Misc Preferences Preferences &Metric &Metric Personali&ze Personali&se Individual settings Individual settings &liter &litre Ascent/descent speed denominator Ascent/descent speed denominator GPS coordinates GPS coordinates Location Display Location display traditional (dms) deg/min/sec decimal decimal Threshold when showing pO₂ Threshold when showing pO₂ Threshold when showing pN₂ Threshold when showing pN₂ Threshold when showing pHe Threshold when showing pHe Max pO₂ when showing MOD Max pO₂ when showing MOD Draw dive computer reported ceiling red Draw dive computer reported ceiling red Show unused cylinders in Equipment tab Show unused cylinders in Equipment tab Show average depth Show average depth GFLow GFLow GFHigh GFHigh No proxy No proxy System proxy System proxy HTTP proxy HTTP proxy SOCKS proxy SOCKS proxy To disconnect Subsurface from your Facebook account, use the button below To disconnect Subsurface from your Facebook account, use the button below To connect to Facebook, please log in. This enables Subsurface to publish dives to your timeline To connect to Facebook, please log in. This enables Subsurface to publish dives to your timeline Subsurface cloud storage (credentials verified) Subsurface cloud storage (credentials verified) Restart required Restart required To correctly load a new language you must restart Subsurface. To correctly load a new language you must restart Subsurface. Cloud storage email and password can only consist of letters, numbers, and '.', '-', '_', and '+'. Cloud storage email and password can only consist of letters, numbers, and '.', '-', '_', and '+'. If you click OK, all settings of Subsurface will be reset to their default values. This will be applied immediately. If you click OK, all settings of Subsurface will be reset to their default values. This will be applied immediately. Subsurface XML files (*.ssrf *.xml *.XML) Subsurface XML files (*.ssrf *.xml *.XML) Open default log file Open default log file Warning Warning PrintDialog &Preview &Preview P&rint P&rint Print Print PrintOptions &Table print &Table print One dive per page One dive per page Two dives per page Two dives per page &Dive list print &Dive list print &Statistics print &Statistics print Print options Print options Print only selected dives Print only selected dives Print in color Print in colour Template Template Edit Edit Delete Delete Export Export Import Import Print type Print type Import template file Import template file HTML files (*.html) HTML files (*.html) Export template files as Export template files as This action cannot be undone! This action cannot be undone! Delete template: %1? Delete template: %1? ProfilePrintModel unknown unknown Dive #%1 - %2 Dive No. %1 - %2 Max depth: %1 %2 Max depth: %1 %2 Duration: %1 min Duration: %1 min Gas used: Gas used: Tags: Tags: SAC: SAC: Weights: Weights: Notes: Notes: Divemaster: Divemaster: Buddy: Buddy: Suit: Suit: Viz: Viz: Rating: Rating: ProfileWidget2 (#%1 of %2) (No.%1 of %2) Unknown dive computer Unknown dive computer Show NDL / TTS was disabled because of excessive processing time Show NDL / TTS was disabled because of excessive processing time Make first divecomputer Make first dive computer Delete this divecomputer Delete this dive computer Add gas change Add gas change (Tank %1) (Tank %1) Add set-point change Add set-point change Add bookmark Add bookmark Edit the profile Edit the profile Remove event Remove event Hide similar events Hide similar events Edit name Edit name Adjust pressure of tank %1 (currently interpolated as %2) Adjust pressure of tank %1 (currently interpolated as %2) Unhide all events Unhide all events Hide events Hide events Hide all %1 events? Hide all %1 events? Remove the selected event? Remove the selected event? %1 @ %2:%3 %1 @ %2:%3 Edit name of bookmark Edit name of bookmark Custom name: Custom name: Name is too long! Name is too long. QObject AIR AIR OXYGEN OXYGEN Remove this point Remove this point Average Average Minimum Minimum Maximum Maximum Move the map and double-click to set the dive location Move the map and double-click to set the dive location h: h: min min kg kg lbs lbs ft ft m m psi psi bar bar l l cuft cuft Invalid response from server Invalid response from server Expected XML tag 'DiveDateReader', got instead '%1 Expected XML tag 'DiveDateReader', got instead '%1 Expected XML tag 'DiveDates' not found Expected XML tag 'DiveDates' not found Malformed XML response. Line %1: %2 Malformed XML response. Line %1: %2 ReadSettingsThread This feature is not yet available for the selected dive computer. This feature is not yet available for the selected dive computer. RenumberDialog Renumber Renumber New starting number New starting number New number New number ResetSettingsThread Reset settings failed! Reset settings failed SearchBar Form Form SetpointDialog Renumber Renumber New set-point (0 for OC) New set-point (0 for OC) bar bar ShiftImageTimesDialog Shift times of image(s) by Shift times of image(s) by h:mm h:mm Shift selected image times Shift selected image times Earlier Earlier Later Later Warning! Not all images have timestamps in the range between 30 minutes before the start and 30 minutes after the end of any selected dive. Warning! Not all images have timestamps in the range between 30 minutes before the start and 30 minutes after the end of any selected dive. Load images even if the time does not match the dive time Load images even if the time does not match the dive time To compute the offset between the clocks of your dive computer and your camera use your camera to take a picture of your dive compuer displaying the current time. Download that image to your computer and press this button. To compute the offset between the clocks on your dive computer and your camera, use your camera to take a picture of your dive computer displaying the current time. Download that image to your computer and press this button. Determine camera time offset Determine camera time offset Select image of divecomputer showing time Select image of divecomputer showing time Which date and time are displayed on the image? Which date and time are displayed on the image? Open image file Open image file Image files (*.jpg *.jpeg *.pnm *.tif *.tiff) Image files (*.jpg *.jpeg *.pnm *.tif *.tiff) ShiftTimesDialog Shift selected dive times Shift selected dive times Shift times of selected dives by Shift times of selected dives by Shifted time: Shifted time: Current time: Current time: 0:0 0:0 h:mm h:mm Earlier Earlier Later Later SimpleDiveSiteEditDialog Dialog Dialog Name Name Coordinates Coordinates Description Description Notes Notes Dive site quick edit. Hit ESC or click outside to close Dive site quick edit. Hit ESC or click outside to close SocialNetworkDialog Dive date: %1 Dive date: %1 Duration: %1 Duration: %1 h: abbreviation for hours plus separator h: min abbreviation for minutes min Dive location: %1 Dive location: %1 Buddy: %1 Buddy: %1 Divemaster: %1 Divemaster: %1 %1 %1 SocialnetworksDialog Dialog Dialog The text to the right will be posted as the description with your profile picture to Facebook. The album name is required (the profile picture will be posted to that album). The text to the right will be posted as the description with your profile picture to Facebook. The album name is required (the profile picture will be posted to that album). Album Album The profile picture will be posted in this album (required) The profile picture will be posted in this album (required) Include Include Date and time Date and time Duration Duration Location Location Divemaster Divemaster Buddy Buddy Notes Notes Facebook post preview Facebook post preview SubsurfaceAbout About Subsurface About Subsurface &License &License &Website &Website &Close &Close Subsurface %1 Multi-platform divelog software Linus Torvalds, Dirk Hohndel, Tomaz Canabrava, and others, 2011-2015 Subsurface %1 Multi-platform divelog software Linus Torvalds, Dirk Hohndel, Tomaz Canabrava, and others, 2011-2015 SubsurfaceWebServices Webservice Webservice Connecting... Connecting... Download finished Download finished Download error: %1 Download error: %1 Connection error: Connection error: Download successful Download successful Invalid user identifier! Invalid user identifier. Enter User ID and click Download Enter User ID and click download Cannot parse response! Cannot parse response. SuitFilter Suits: Suits: SuitsFilterModel No suit set No suit set TableView GroupBox GroupBox TagFilter Tags: Tags: TagFilterModel Empty tags Empty tags TankInfoModel Description Description ml ml bar bar TemplateEdit Preview Preview Style Style Font Font Arial Arial Impact Impact Georgia Georgia Courier Courier Verdana Verdana Font size Font size Edit template Edit template Color palette Color palette Default Default Almond Almond Shades of blue Shades of blue Custom Custom Line spacing Line spacing Template Template Colors Colours Background Background color1 colour1 Edit Edit Table cells 1 Table cells 1 color2 colour2 Table cells 2 Table cells 2 color3 colour3 Text 1 Text 1 color4 colour4 Text 2 Text 2 color5 colour5 Borders Borders color6 colour6 Do you want to save your changes? Do you want to save your changes? You are about to modify a template bundled with Subsurface. You are about to modify a template bundled with Subsurface. TestParse Sample time Sample time Sample depth Sample depth Sample temperature Sample temperature Sample pO₂ Sample pO₂ Sample sensor1 pO₂ Sample sensor1 pO₂ Sample sensor2 pO₂ Sample sensor2 pO₂ Sample sensor3 pO₂ Sample sensor3 pO₂ Sample CNS Sample CNS Sample NDL Sample NDL Sample TTS Sample TTS Sample stopdepth Sample stopdepth Sample pressure Sample pressure ToolTipItem Information Information TopBar Subsurface mobile Subsurface mobile TripItem (%1 shown) (%1 shown) URLDialog Dialog Dialog Enter URL for images Enter URL for images UpdateManager Check for updates. Check for updates. Subsurface was unable to check for updates. Subsurface was unable to check for updates. The following error occurred: The following error occurred: Please check your internet connection. Please check your internet connection. You are using the latest version of Subsurface. You are using the latest version of Subsurface. A new version of Subsurface is available. Click on: <a href="%1">%1</a> to download it. A new version of Subsurface is available. Click on: <a href="%1">%1</a> to download it. A new version of Subsurface is available. A new version of Subsurface is available. Latest version is %1, please check %2 our download page %3 for information in how to update. Latest version is %1, please check %2 our download page %3 for information in how to update. Newest release version is Newest release version is The server returned the following information: The server returned the following information: Subsurface is checking every two weeks if a new version is available. If you don't want Subsurface to continue checking, please click Decline. Subsurface is checking every two weeks if a new version is available. If you don't want Subsurface to continue checking, please click Decline. Decline Decline Accept Accept Automatic check for updates Automatic check for updates UserManual User manual User manual Cannot find the Subsurface manual Cannot find the Subsurface manual UserSurvey <html><head/><body>We would love to learn more about our users, their preferences and their usage habits. Please spare a minute to fill out this form and submit it to the Subsurface team.</body></html> <html><head/><body>We would love to learn more about our users, their preferences and their usage habits. Please spare a minute to fill out this form and submit it to the Subsurface team.</body></html> Other software/sources Other software/sources Manually entering dives Manually entering dives User survey User survey Subsurface user survey Subsurface user survey Technical diver Technical diver Recreational diver Recreational diver Dive planner Dive planner Supported dive computer Supported dive computer Android/iPhone companion app Android/iPhone companion app Any suggestions? (in English) Any suggestions? (in English) The following information about your system will also be submitted. The following information about your system will also be submitted. What kind of diver are you? What kind of diver are you? Where are you importing data from? Where are you importing data from? Operating system: %1 Operating system: %1 CPU architecture: %1 CPU architecture: %1 OS CPU architecture: %1 OS CPU architecture: %1 Language: %1 Language: %1 Should we ask you later? Should we ask you later? Don't ask me again Don't ask me again Ask later Ask later Submit user survey. Submit user survey. Ask again? Ask again? Send Send Subsurface was unable to submit the user survey. Subsurface was unable to submit the user survey. The following error occurred: The following error occurred: Please check your internet connection. Please check your internet connection. Survey successfully submitted. Survey successfully submitted. There was an error while trying to check for updates. %1 There was an error while trying to check for updates. %1 WSInfoModel Description Description kg kg WebServices Web service connection Web service connection Status: Status: Enter your ID here Enter your ID here Download Download User ID User ID Save user ID locally? Save user ID locally? Password Password Upload Upload Operation timed out Operation timed out Transferring data... Transferring data... WeightModel Type Type Weight Weight Clicking here will remove this weight system. Clicking here will remove this weight system. WinBluetoothDeviceDiscoveryAgent No error No error WriteSettingsThread Failed! Failed! This feature is not yet available for the selected dive computer. This feature is not yet available for the selected dive computer. YearlyStatisticsModel Year > Month / Trip Year > Month / Trip # No. Duration Total Duration Total Average Average Shortest Shortest Longest Longest Depth (%1) Average Depth (%1) Average Minimum Minimum Maximum Maximum SAC (%1) Average SAC (%1) Average Temp. (%1) Average Temp. (%1) Average getTextFromC None None Ocean Ocean Country Country State State County County Town Town City City getextFromC Error parsing the header Error parsing the header gettextFromC pascal pascal bar bar psi psi cuft cuft m m ft ft m/min m/min m/s m/s ft/min ft/min ft/s ft/s lbs lbs kg kg (%s) or (%s) (%s) or (%s) air air integrated integrated belt belt ankle ankle backplate weight backplate weight clip-on clip-on Failed to read '%s' Failed to read '%s' Cannot open CSV file %s; please use Import log file dialog 'Import log file' should be the same text as corresponding label in Import menu Cannot open CSV file %s; please use Import log file dialog Empty file '%s' Empty file '%s' Poseidon import failed: unable to read '%s' Poseidon import failed: unable to read '%s' Mouth piece position OC Mouth piece position OC Mouth piece position CC Mouth piece position CC Mouth piece position unknown Mouth piece position unknown Mouth piece position not connected Mouth piece position not connected Power off Power off O₂ calibration failed O₂ calibration failed O₂ calibration O₂ calibration No matching DC found for file '%s' No matching DC found for file '%s' none none deco stop deco stop battery battery rbt rbt ascent ascent ceiling ceiling workload workload transmitter transmitter violation violation bookmark bookmark surface surface safety stop safety stop gaschange gas change safety stop (voluntary) safety stop (recommended) safety stop (mandatory) safety stop (mandatory) deepstop deep stop ceiling (safety stop) ceiling (safety stop) divetime divetime below floor event showing dive is below deco floor and adding deco time below floor maxdepth maxdepth OLF OLF airtime airtime rgbm rgbm heading heading pO₂ pO₂ tissue level warning tissue level warning non stop time no-stop time invalid event number invalid event number Unable to create parser for %s %s Unable to create parser for %s %s Error registering the data Error registering data Error parsing the datetime Error parsing the date/time Dive %d: %s Dive %d: %s Error parsing the divetime Error parsing the divetime Error parsing the maxdepth Error parsing the maxdepth Error parsing temperature Error parsing temperature Error parsing the gas mix count Error parsing the gas mix count Error obtaining water salinity Error obtaining water salinity Error obtaining surface pressure Error obtaining surface pressure Error obtaining divemode Error obtaining divemode Error parsing the gas mix Error parsing the gas mix Error parsing the samples Error parsing the samples Event: waiting for user action Event: waiting for user action model=%u (0x%08x), firmware=%u (0x%08x), serial=%u (0x%08x) model=%u (0x%08x), firmware=%u (0x%08x), serial=%u (0x%08x) Error registering the event handler. Error registering the event handler. Error registering the cancellation handler. Error registering the cancellation handler. Dive data import error Dive data import error Unable to create libdivecomputer context Unable to create libdivecomputer context Unable to open %s %s (%s) Unable to open %s %s (%s) Insufficient privileges to open the device %s %s (%s) Insufficient privileges to open the device %s %s (%s) Strange percentage reading %s Strange percentage reading %s multiple GPS locations for this dive site; also %s multiple GPS locations for this dive site; also %s Failed to parse '%s' Failed to parse '%s' Can't open stylesheet %s Can't open stylesheet %s EAN%d EAN%d Can't find gas %s Can't find gas %s Too many gas mixes Too many gas mixes Decompression calculation aborted due to excessive time Decompression calculation aborted due to excessive time Subsurface dive plan Subsurface dive plan depth depth runtime runtime duration duration DISCLAIMER / WARNING: THIS IS A NEW IMPLEMENTATION OF THE %s ALGORITHM AND A DIVE PLANNER IMPLEMENTATION BASED ON THAT WHICH HAS RECEIVED ONLY A LIMITED AMOUNT OF TESTING. WE STRONGLY RECOMMEND NOT TO PLAN DIVES SIMPLY BASED ON THE RESULTS GIVEN HERE. DISCLAIMER / WARNING: THIS IS A NEW IMPLEMENTATION OF THE %s ALGORITHM AND A DIVE PLANNER IMPLEMENTATION BASED ON THAT WHICH HAS RECEIVED ONLY A LIMITED AMOUNT OF TESTING. WE STRONGLY RECOMMEND NOT TO PLAN DIVES SIMPLY BASED ON THE RESULTS GIVEN HERE. gas gas Transition to %.*f %s in %d:%02d min - runtime %d:%02u on %s (SP = %.1fbar) Transition to %.*f %s in %d:%02d min - runtime %d:%02u on %s (SP = %.1fbar) Transition to %.*f %s in %d:%02d min - runtime %d:%02u on %s Transition to %.*f %s in %d:%02d min - runtime %d:%02u on %s Stay at %.*f %s for %d:%02d min - runtime %d:%02u on %s (SP = %.1fbar) Stay at %.*f %s for %d:%02d min - runtime %d:%02u on %s (SP = %.1fbar) Stay at %.*f %s for %d:%02d min - runtime %d:%02u on %s Stay at %.*f %s for %d:%02d min - runtime %d:%02u on %s %3.0f%s %3.0f%s %3dmin %3dmin (SP = %.1fbar) (SP = %.1fbar) Switch gas to %s (SP = %.1fbar) Switch gas to %s (SP = %.1fbar) Switch gas to %s Switch gas to %s CNS CNS OTU OTU Gas consumption (CCR legs excluded): Gas consumption (CCR legs excluded): Gas consumption: Gas consumption: Warning: Warning: based on Bühlmann ZHL-16B with GFlow = %d and GFhigh = %d based on Bühlmann ZHL-16B with GFlow = %d and GFhigh = %d based on VPM-B at nominal conservatism based on VPM-B at nominal conservatism based on VPM-B at +%d conservatism based on VPM-B at +%d conservatism recreational mode based on Bühlmann ZHL-16B with GFlow = %d and GFhigh = %d recreational mode based on Bühlmann ZHL-16B with GFlow = %d and GFhigh = %d this is more gas than available in the specified cylinder! this is more gas than available in the specified cylinder! not enough reserve for gas sharing on ascent! not enough reserve for gas sharing on ascent! %.0f%s/%.0f%s of %s (%.0f%s/%.0f%s in planned ascent) %.0f%s/%.0f%s of %s (%.0f%s/%.0f%s in planned ascent) %.0f%s (%.0f%s during planned ascent) of %s %.0f%s (%.0f%s during planned ascent) of %s high pO₂ value %.2f at %d:%02u with gas %s at depth %.*f %s high pO₂ value %.2f at %d:%02u with gas %s at depth %.*f %s low pO₂ value %.2f at %d:%02u with gas %s at depth %.*f %s low pO₂ value %.2f at %d:%02u with gas %s at depth %.*f %s ean ean @: %d:%02d D: %.1f%s @: %d:%02d D: %.1f%s P: %d%s P: %d%s T: %.1f%s T: %.1f%s V: %.1f%s V: %.1f%s SAC: %.*f%s/min SAC: %.*f%s/min CNS: %u%% CNS: %u%% pO%s: %.2fbar pO%s: %.2fbar pN%s: %.2fbar pN%s: %.2fbar pHe: %.2fbar pHe: %.2fbar MOD: %d%s MOD: %d%s EAD: %d%s EADD: %d%s EAD: %d%s EADD: %d%s END: %d%s EADD: %d%s END: %d%s EADD: %d%s Safetystop: %umin @ %.0f%s Safety Stop: %umin @ %.0f%s Safetystop: unkn time @ %.0f%s Safety Stop: unkn time @ %.0f%s Deco: %umin @ %.0f%s Deco: %umin @ %.0f%s Deco: unkn time @ %.0f%s Deco: unkn time @ %.0f%s In deco In deco NDL: %umin NDL: %umin TTS: %umin TTS: %umin Deco: %umin @ %.0f%s (calc) Deco: %umin @ %.0f%s (calc) In deco (calc) In deco (calc) NDL: %umin (calc) NDL: %umin (calc) TTS: %umin (calc) TTS: %umin (calc) RBT: %umin RBT: %umin Calculated ceiling %.0f%s Calculated ceiling %.0f%s Tissue %.0fmin: %.1f%s Tissue %.0fmin: %.1f%s heartbeat: %d heartbeat: %d bearing: %d bearing: %d mean depth to here %.1f%s mean depth to here %.1f%s %sT: %d:%02d min %sT: %d:%02d min %s %sD:%.1f%s %s %sD:%.1f%s %s %sD:%.1f%s %s %sD:%.1f%s %s%sV:%.2f%s %s%sV:%.2f%s %s %sV:%.2f%s %s %sV:%.2f%s %s %sP:%d %s %s %sP:%d %s %1km %1km %1m %1m %1mi %1mi %1yd %1yd C C F F %1 %2 (%3 dives) %1 %2 (%3 dives) %1 %2 (1 dive) %1 %2 (1 dive) boat boat shore shore drift drift deep deep cavern cavern ice ice search search wreck wreck cave cave altitude altitude pool pool lake lake river river night night Error: the file does not appear to be a DATATRAK divelog Error: the file does not appear to be a DATATRAK divelog clear clear misty misty fog fog rain rain storm storm snow snow No suit No suit Shorty Shorty Combi Combi Wet suit Wet suit Semidry suit Semi-dry suit Dry suit Dry suit no stop no stop single ascent single ascent multiple ascent multiple ascent fresh fresh salt water salt water sight seeing sight seeing club dive club dive instruction instruction other other Other activities Other activities Datatrak/Wlog notes Datatrak/Wlog notes Manually entered dive Manually entered dive Unknown Unknown Error: couldn't open the file %s Error: couldn't open the file %s Error: no dive Error: no dive student student photo photo video video instructor instructor deco deco OC-gas OC-gas diluent diluent oxygen oxygen ℓ ℓ more than %d days more than %d days %dd %dh %dmin %dd %dh %dmin %dh %dmin %dh %dmin for dives # for dive No.s for selected dives for selected dives for dive #%d for dive No. %d for selected dive for selected dive for all dives for all dives (no dives) (no dives) Sun Sun Mon Mon Tue Tue Wed Wed Thu Thu Fri Fri Sat Sat Jan Jan Feb Feb Mar Mar Apr Apr May May Jun Jun Jul Jul Aug Aug Sep Sep Oct Oct Nov Nov Dec Dec unknown unknown data data %s %s %s %s Uemis Zurich: the file system is almost full. Disconnect/reconnect the dive computer and click 'Retry' Uemis Zurich: the file system is almost full. Disconnect/reconnect the dive computer and click 'Retry' Uemis Zurich: the file system is full. Disconnect/reconnect the dive computer and click Retry Uemis Zurich: the file system is full. Disconnect/reconnect the dive computer and click Retry Short write to req.txt file. Is the Uemis Zurich plugged in correctly? Short write to req.txt file. Is the Uemis Zurich plugged in correctly? No dives to download. No dives to download. divelog # divelog # divespot # divespot # details for # details for # wetsuit wetsuit semidry semidry drysuit drysuit shorty shorty vest vest long john long john jacket jacket full suit full suit 2 pcs full suit 2 pcs full suit membrane membrane Initialise communication Initialise communication Uemis init failed Uemis init failed Start download Start download Safety stop violation Safety stop violation Speed alarm Speed alarm Speed warning Speed warning pO₂ green warning pO₂ green warning pO₂ ascend warning pO₂ ascend warning pO₂ ascend alarm pO₂ ascend alarm Tank pressure info Tank pressure info RGT warning RGT warning RGT alert RGT alert Tank change suggested Tank change suggested Depth limit exceeded Depth limit exceeded Max deco time warning Max deco time warning Dive time info Dive time info Dive time alert Dive time alert Marker Marker No tank data No tank data Low battery warning Low battery warning Low battery alert Low battery alert Can't open file %s Can't open file %s Number Number Date Date Time Time Location Location Air temp. Air temp. Water temp. Water temp. Statistics Statistics Rating Rating Visibility Visibility Duration Duration Dives Dives Expand all Expand all Collapse all Collapse all Trips Trips Advanced search Advanced search Divemaster Divemaster Buddy Buddy Suit Suit Tags Tags Notes Notes Show more details Show more details Yearly statistics Yearly statistics Year Year Total time Total time Average time Average time Shortest time Shortest time Longest time Longest time Average depth Average depth Min. depth Min. depth Max. depth Max. depth Min. SAC Min. SAC Max. SAC Max. SAC Average temp. Average temp. Min. temp. Min. temp. Max. temp. Max. temp. Back to list Back to list Dive equipment Dive equipment Work pressure Work pressure Start pressure Start pressure End pressure End pressure Dive status Dive status Average SAC Average SAC Dive No. Dive No. Dive profile Dive profile Dive information Dive information Type Type Size Size Gas Gas Weight Weight Events Events Name Name Value Value Coordinates Coordinates Date: Date: Time: Time: Duration: Duration: min min Max. depth: Max. depth: Air temp.: Air temp.: Water temp.: Water temp.: Location: Location: Notes: Notes: N N S S E E W W Remote storage and local data diverged. Error: merge failed (%s) Remote storage and local data diverged. Error: merge failed (%s) Local cache directory %s corrupted - can't sync with Subsurface cloud storage Local cache directory %s corrupted - can't sync with Subsurface cloud storage Could not update local cache to newer remote data Could not update local cache to newer remote data Subsurface cloud storage corrupted Subsurface cloud storage corrupted Could not update Subsurface cloud storage, try again later Could not update Subsurface cloud storage, try again later Remote storage and local data diverged. Cannot combine local and remote changes Remote storage and local data diverged. Cannot combine local and remote changes Remote storage and local data diverged Remote storage and local data diverged Remote storage and local data diverged. Error: writing the data failed (%s) Remote storage and local data diverged. Error: writing the data failed (%s) Problems with local cache of Subsurface cloud data Problems with local cache of Subsurface cloud data Moved cache data to %s. Please try the operation again. Moved cache data to %s. Please try the operation again. Error connecting to Subsurface cloud storage Error connecting to Subsurface cloud storage git clone of %s failed (%s) git clone of %s failed (%s) additional name for site: %s additional name for site: %s Unknown DC in dive %d Unknown DC in dive %d Error - %s - parsing dive %d Error - %s - parsing dive %d main Subsurface mobile Subsurface mobile plannerDetails Form Form <html><head/><body>Dive plan details</body></html> <html><head/><body>Dive plan details</body></html> Print Print <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Courier'; font-size:13pt; font-weight:400; font-style:normal;"> </body></html> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Courier'; font-size:13pt; font-weight:400; font-style:normal;"> </body></html> plannerSettingsWidget Form Form Rates Rates Ascent Ascent below 75% avg. depth below 75% avg. depth m/min m/min Descent Descent surface to the bottom surface to the bottom Planning Planning VPM-B deco VPM-B deco Reserve gas Reserve gas Postpone gas change if a stop is not required Postpone gas change if a stop is not required Only switch at required stops Only switch at required stops GF low GF low % % GF high GF high Drop to first depth Drop to first depth Last stop at 6m Last stop at 6m Plan backgas breaks Plan backgas breaks Gas options Gas options Bottom SAC Bottom SAC Deco SAC Deco SAC Bottom pO₂ Bottom pO₂ Deco pO₂ Deco pO₂ ℓ/min ℓ/min Display runtime Display runtime Display segment duration Display segment duration Display transitions in deco Display transitions in deco Verbatim dive plan Verbatim dive plan bar bar 75% to 50% avg. depth 75% to 50% avg. depth 50% avg. depth to 6m 50% avg. depth to 6m 6m to surface 6m to surface Bühlmann deco Bühlmann deco min min Maximize bottom time allowed by gas and no decompression limits Maximise bottom time allowed by gas and no decompression limits Recreational mode Recreational mode Min. switch duration Min. switch duration Safety stop Safety stop Conservatism level Conservatism level Notes Notes In dive plan, show runtime (absolute time) of stops In dive plan, show runtime (absolute time) of stops In dive plan, show duration (relative time) of stops In dive plan, show duration (relative time) of stops In diveplan, list transitions or treat them as implicit In dive plan, list transitions or treat them as implicit