Merge pull request #1168 from newsboytko/newsboytko/frosty-flake

Support Frosty Flake Controller (CM Storm QFR)

11 files changed, 542 insertions, 0 deletions

diff --git a/keyboards/frosty_flake/Makefile b/keyboards/frosty_flake/Makefile
new file mode 100644
index 000000000..57b2ef62e
--- /dev/null
+++ b/keyboards/frosty_flake/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
diff --git a/keyboards/frosty_flake/config.h b/keyboards/frosty_flake/config.h
new file mode 100644
index 000000000..2c73f1074
--- /dev/null
+++ b/keyboards/frosty_flake/config.h
@@ -0,0 +1,147 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Bathroom Epiphanies
+#define PRODUCT         frosty_flake
+#define DESCRIPTION     Frosty Flake controller for the CM Storm Quick Fire Rapid
+
+/*
+ * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies
+ * Ported from the Bathroom Epiphanies TMK Firmware:
+ * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers
+ *
+ */
+
+/* key matrix size */
+#define MATRIX_ROWS 8   // Row0 - Row7 in the schematic
+#define MATRIX_COLS 18  // ColA - ColR in the schematic
+
+/*
+ * Keyboard Matrix Assignments
+ */
+#define UNUSED_PINS { B0, C4, D3 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/frosty_flake/frosty_flake.c b/keyboards/frosty_flake/frosty_flake.c
new file mode 100644
index 000000000..1cd476038
--- /dev/null
+++ b/keyboards/frosty_flake/frosty_flake.c
@@ -0,0 +1,63 @@
+#include "frosty_flake.h"
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    DDRB |= (1<<7);
+    DDRC |= (1<<5) | (1<<6);
+
+    print_dec(usb_led);
+
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+        PORTC &= ~(1<<5);
+    else
+        PORTC |=  (1<<5);
+
+    if (usb_led & (1<<USB_LED_NUM_LOCK))
+        PORTB &= ~(1<<7);
+    else
+        PORTB |=  (1<<7);
+
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+        PORTC &= ~(1<<6);
+    else
+        PORTC |=  (1<<6);
+
+    led_set_user(usb_led);
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+}
\ No newline at end of file
diff --git a/keyboards/frosty_flake/frosty_flake.h b/keyboards/frosty_flake/frosty_flake.h
new file mode 100644
index 000000000..3b52df6ba
--- /dev/null
+++ b/keyboards/frosty_flake/frosty_flake.h
@@ -0,0 +1,50 @@
+#ifndef FROSTY_FLAKE_H
+#define FROSTY_FLAKE_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+/*
+  Matrix col/row mapping
+
+  ,----.    ,-------------------. ,-------------------. ,-------------------. ,--------------.
+  | J6 |    | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+  `----'    `-------------------' `-------------------' `-------------------' `--------------'
+  ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+  | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 |     B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
+  |-------------------------------------------------------------------------| |--------------| |-------------------|
+  | J2   | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 |   B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
+  |-------------------------------------------------------------------------| '--------------' |--------------     |
+  | O5    | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 |       B1 |                  | K2 | L2 | Q2 |    |
+  |-------------------------------------------------------------------------|      ,----.      |-------------------|
+  | N2      | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 |          N3 |      | O6 |      | K3 | L3 | Q3 | O3 |
+  |-------------------------------------------------------------------------| ,--------------. |--------------     |
+  | A4 | P2 | C6 |                  K6                  | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6      | Q6 |    |
+  `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+#define KEYMAP( \
+  KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5,                       \
+  KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4,   KK1, KL1, KQ1, KQ0, \
+  KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7,   KK5, KL5, KQ5, KO5, \
+  KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                    KK2, KL2, KQ2,      \
+  KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,        KK3, KL3, KQ3, KO3, \
+  KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0,   KL6,      KQ6       \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/*          A       B       C       D       E       F       G       H       I       J       K       L       M       N       O       P       Q       R       */ \
+/* 0 */ {   KC_NO,  KB0,    KC0,    KD0,    KC_NO,  KF0,    KG0,    KC_NO,  KC_NO,  KC_NO,  KK0,    KL0,    KC_NO,  KC_NO,  KO0,    KC_NO,  KQ0,    KR0     }, \
+/* 1 */ {   KA1,    KB1,    KC_NO,  KD1,    KE1,    KF1,    KG1,    KH1,    KI1,    KJ1,    KK1,    KL1,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KQ1,    KC_NO   }, \
+/* 2 */ {   KC_NO,  KB2,    KC_NO,  KD2,    KE2,    KF2,    KG2,    KH2,    KI2,    KJ2,    KK2,    KL2,    KC_NO,  KN2,    KC_NO,  KP2,    KQ2,    KR2     }, \
+/* 3 */ {   KC_NO,  KB3,    KC_NO,  KD3,    KE3,    KF3,    KG3,    KH3,    KI3,    KJ3,    KK3,    KL3,    KM3,    KN3,    KO3,    KC_NO,  KQ3,    KR3     }, \
+/* 4 */ {   KA4,    KB4,    KC_NO,  KD4,    KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,    KL4,    KC_NO,  KC_NO,  KO4,    KC_NO,  KQ4,    KR4     }, \
+/* 5 */ {   KA5,    KC_NO,  KC5,    KD5,    KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KK5,    KL5,    KC_NO,  KC_NO,  KO5,    KC_NO,  KQ5,    KR5     }, \
+/* 6 */ {   KC_NO,  KB6,    KC6,    KC_NO,  KE6,    KF6,    KG6,    KH6,    KI6,    KJ6,    KK6,    KL6,    KC_NO,  KC_NO,  KO6,    KC_NO,  KQ6,    KR6     }, \
+/* 7 */ {   KA7,    KB7,    KC7,    KD7,    KE7,    KF7,    KG7,    KH7,    KI7,    KJ7,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KO7,    KC_NO,  KQ7,    KR7     }  \
+}
+
+#endif
diff --git a/keyboards/frosty_flake/keymaps/default/Makefile b/keyboards/frosty_flake/keymaps/default/Makefile
new file mode 100644
index 000000000..9d3df5964
--- /dev/null
+++ b/keyboards/frosty_flake/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/frosty_flake/keymaps/default/config.h b/keyboards/frosty_flake/keymaps/default/config.h
new file mode 100644
index 000000000..8893d122e
--- /dev/null
+++ b/keyboards/frosty_flake/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/frosty_flake/keymaps/default/keymap.c b/keyboards/frosty_flake/keymaps/default/keymap.c
new file mode 100644
index 000000000..4dc7ed655
--- /dev/null
+++ b/keyboards/frosty_flake/keymaps/default/keymap.c
@@ -0,0 +1,11 @@
+#include "frosty_flake.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(\
+       KC_ESC,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_PSCR,KC_SLCK,KC_PAUS,                        \
+       KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,   KC_INS,KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+       KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,   KC_DEL, KC_END,KC_PGDN,    KC_P7,  KC_P8,  KC_P9,KC_PPLS, \
+      KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,                              KC_P4,  KC_P5,  KC_P6,      \
+      KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
+      KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
+};
\ No newline at end of file
diff --git a/keyboards/frosty_flake/keymaps/default/readme.md b/keyboards/frosty_flake/keymaps/default/readme.md
new file mode 100644
index 000000000..11bf4825f
--- /dev/null
+++ b/keyboards/frosty_flake/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for frosty_flake
diff --git a/keyboards/frosty_flake/matrix.c b/keyboards/frosty_flake/matrix.c
new file mode 100644
index 000000000..05dffdb64
--- /dev/null
+++ b/keyboards/frosty_flake/matrix.c
@@ -0,0 +1,135 @@
+/*
+  Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t scan_col(void) {
+    return (
+        (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
+        (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) |
+        (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) |
+        (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) |
+        (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) |
+        (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) |
+        (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) |
+        (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7))
+    );
+}
+
+static void select_col(uint8_t col) {
+    switch (col) {
+        case  0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break;
+        case  1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break;
+        case  2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break;
+        case  3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break;
+        case  4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break;
+        case  5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break;
+        case  6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break;
+        case  7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break;
+        case  8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break;
+        case  9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break;
+        case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break;
+        case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break;
+        case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break;
+        case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break;
+        case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break;
+        case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break;
+        case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break;
+        case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break;
+    }
+}
+
+void matrix_init(void) {
+    /* Row output pins */
+    DDRD  |=  0b01111011;
+    /* Column input pins */
+    DDRC  &= ~0b10000000;
+    DDRB  &= ~0b01111111;
+    PORTC |=  0b10000000;
+    PORTB |=  0b01111111;
+
+    for (uint8_t i=0; i < MATRIX_ROWS; i++)
+        matrix[i] = matrix_debouncing[i] = 0;
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+        select_col(col);
+        _delay_us(3);
+        matrix_row_t col_scan = scan_col();
+        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+            bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+            bool curr_bit = col_scan & (1<<row);
+            if (prev_bit != curr_bit) {
+                matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+                debouncing = DEBOUNCING_DELAY;
+            }
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing)
+            _delay_ms(1);
+        else
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++)
+                matrix[i] = matrix_debouncing[i];
+    }
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+    print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_row_t matrix_row = matrix_get_row(row);
+        xprintf("%02X: ", row);
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            bool curr_bit = matrix_row & (1<<col);
+            xprintf("%c", curr_bit ? '*' : '.');
+        }
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void) {
+    uint8_t count = 0;
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++)
+        count += bitpop32(matrix[row]);
+    return count;
+}
\ No newline at end of file
diff --git a/keyboards/frosty_flake/readme.md b/keyboards/frosty_flake/readme.md
new file mode 100644
index 000000000..ff440e33b
--- /dev/null
+++ b/keyboards/frosty_flake/readme.md
@@ -0,0 +1,32 @@
+frosty_flake keyboard firmware
+======================
+
+This is the firmware for Rev. 20140521 of the Frosty Flake controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/).
+
+The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers), but has been cleaned up to match the [schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf) and gone through some minor refactoring for QMK.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/frosty_flake folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/frosty_flake/rules.mk b/keyboards/frosty_flake/rules.mk
new file mode 100644
index 000000000..dd2f4b6ee
--- /dev/null
+++ b/keyboards/frosty_flake/rules.mk
@@ -0,0 +1,71 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
\ No newline at end of file