Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

10 files changed, 367 insertions, 3 deletions

diff --git a/keyboards/tada68/Makefile b/keyboards/tada68/Makefile
new file mode 100644
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/tada68/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h
new file mode 100644
index 000000000..5d8757936
--- /dev/null
+++ b/keyboards/tada68/config.h
@@ -0,0 +1,97 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    TADA
+#define PRODUCT         TADA68
+#define DESCRIPTION     QMK keyboard firmware for TADA68 with WS2812 support
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {D0,D1,F6,F7,D5}
+#define MATRIX_COL_PINS {F0,F1,E6,C7,C6,B7,D4,B1,B0,B5,B4,D7,D6,B3,F4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+/*#define RGB_DI_PIN E2
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 2     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17*/
+//Disabled while I figure out a suitable pin for RGB support.
+//I've tried F5, D2, D3, and E2 but it's possible the end of my
+//strand is bad. New LEDs on order.
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/tada68/keymaps/default/Makefile b/keyboards/tada68/keymaps/default/Makefile
new file mode 100644
index 000000000..2a7ff2779
--- /dev/null
+++ b/keyboards/tada68/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c
new file mode 100644
index 000000000..da57c0343
--- /dev/null
+++ b/keyboards/tada68/keymaps/default/keymap.c
@@ -0,0 +1,98 @@
+#include "tada68.h"
+
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |~ ` |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_BL] = KEYMAP_ANSI(
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC,KC_GRV, \
+  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS,KC_DEL, \
+  KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,KC_PGUP,  \
+  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RSFT,KC_UP,KC_PGDN, \
+  KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,----------------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |  RESET|    |
+   * |----------------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |BL-|BL+|BL   |    |
+   * |----------------------------------------------------------------|
+   * |      |   |   |   |   |   |   |       |   |   |   |        |    |
+   * |----------------------------------------------------------------|
+   * |        | F1|F2 | F3|F4 | F5| F6| F7| F8|   |   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |   |   |    |
+   * `----------------------------------------------------------------'
+   */
+[_FL] = KEYMAP_ANSI(
+  #ifdef RGBLIGHT_ENABLE
+  _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,_______,  \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,_______, \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,_______, \
+  _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______, \
+  _______,_______,_______,                 _______,               _______,_______,_______,_______,_______, _______),
+  #else
+  _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,_______,  \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,_______, \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,_______, \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+  _______,_______,_______,                 _______,               _______,_______,_______,_______,_______, _______),
+  #endif
+};
+
+/*enum function_id {
+    //SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  //[0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}*/
diff --git a/keyboards/tada68/keymaps/default/readme.md b/keyboards/tada68/keymaps/default/readme.md
new file mode 100644
index 000000000..36760d6b9
--- /dev/null
+++ b/keyboards/tada68/keymaps/default/readme.md
@@ -0,0 +1 @@
+# default TADA68 layout
diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
new file mode 100644
index 000000000..552fdea52
--- /dev/null
+++ b/keyboards/tada68/readme.md
@@ -0,0 +1,4 @@
+TADA68 keyboard firmware
+======================
+
+TODO: to be updated.
diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk
new file mode 100644
index 000000000..d8ec42365
--- /dev/null
+++ b/keyboards/tada68/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/tada68/tada68.c b/keyboards/tada68/tada68.c
new file mode 100644
index 000000000..24f89048c
--- /dev/null
+++ b/keyboards/tada68/tada68.c
@@ -0,0 +1,30 @@
+#include "tada68.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/tada68/tada68.h b/keyboards/tada68/tada68.h
new file mode 100644
index 000000000..d0e027a6f
--- /dev/null
+++ b/keyboards/tada68/tada68.h
@@ -0,0 +1,43 @@
+#ifndef TADA68_H
+#define TADA68_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* TADA68 ANSI layout
+   * ,----------------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    | 0e |
+   * |----------------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d | 1e |
+   * |----------------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    | 2e |
+   * |----------------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|    3c| 3d| 3e |
+   * |----------------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 49| 4a|  4b| 4c| 4d| 4e |
+   * `----------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, k2e, \
+	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+	k40, k41, k42,           k45,                k49, k4a, k4b, k4c, k4d, k4e  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e}, \
+	{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c
index 08ef22eb9..d485b46c7 100644
--- a/tmk_core/common/action.c
+++ b/tmk_core/common/action.c
@@ -155,9 +155,10 @@ void process_action(keyrecord_t *record, action_t action)
                                                                 action.key.mods<<4;
                 if (event.pressed) {
                     if (mods) {
-                        if (IS_MOD(action.key.code)) {
+                        if (IS_MOD(action.key.code) || action.key.code == KC_NO) {
                             // e.g. LSFT(KC_LGUI): we don't want the LSFT to be weak as it would make it useless.
-                            // this also makes LSFT(KC_LGUI) behave exactly the same as LGUI(KC_LSFT)
+                            // This also makes LSFT(KC_LGUI) behave exactly the same as LGUI(KC_LSFT).
+                            // Same applies for some keys like KC_MEH which are declared as MEH(KC_NO).
                             add_mods(mods);
                         } else {
                             add_weak_mods(mods);
@@ -168,7 +169,7 @@ void process_action(keyrecord_t *record, action_t action)
                 } else {
                     unregister_code(action.key.code);
                     if (mods) {
-                        if (IS_MOD(action.key.code)) {
+                        if (IS_MOD(action.key.code) || action.key.code == KC_NO) {
                             del_mods(mods);
                         } else {
                             del_weak_mods(mods);