add directories for each keyboard: hhkb, macway

26 files changed, 383 insertions, 794 deletions

diff --git a/Makefile.hhkb b/Makefile.common
index fbf7ede2e..8037b0772 100644
--- a/Makefile.hhkb
+++ b/Makefile.common
@@ -39,37 +39,28 @@
 # To rebuild project do "make clean" then "make all".
 #----------------------------------------------------------------------------
 
-
-# Target file name (without extension).
-TARGET = tmk_hhkb
+# Following variables need to be set in <target>/Makefile:
+# 	TARGET
+# 	COMMON_DIR
+# 	TARGET_DIR
+# 	TARGET_SRC
+# 	MCU
+# 	F_CPU
 
 
 # List C source files here. (C dependencies are automatically generated.)
 SRC =	tmk.c \
+	key_process.c \
 	usb.c \
 	usb_keyboard.c \
 	usb_mouse.c \
 	usb_debug.c \
-	keymap_hhkb.c \
-	matrix_hhkb.c \
 	jump_bootloader.c \
 	print.c
+SRC +=	$(TARGET_SRC)
 
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-#MCU = atmega32u4        # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
+# C source file search path
+VPATH = $(TARGET_DIR):$(COMMON_DIR)
 
 
 # Output format. (can be srec, ihex, binary)
@@ -113,7 +104,7 @@ DEBUG = dwarf-2
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = 
+EXTRAINCDIRS = $(TARGET_DIR) $(COMMON_DIR)
 
 
 # Compiler flag to set the C Standard level.
@@ -161,7 +152,7 @@ CFLAGS += -Wstrict-prototypes
 #CFLAGS += -Wundef
 #CFLAGS += -Wunreachable-code
 #CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += -Wa,-adhlns=$(@:%.o=$(OBJDIR)/%.lst)
 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 CFLAGS += $(CSTANDARD)
 
@@ -376,10 +367,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 
 # Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 
 
 # Compiler flags to generate dependency files.
diff --git a/Makefile.macway b/Makefile.macway
deleted file mode 100644
index d259fd2db..000000000
--- a/Makefile.macway
+++ /dev/null
@@ -1,620 +0,0 @@
-# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-#                Please customize the avrdude settings below first!
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# Target file name (without extension).
-TARGET = tmk
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC =	$(TARGET).c \
-	usb.c \
-	usb_keyboard.c \
-	usb_mouse.c \
-	usb_debug.c \
-	keymap.c \
-	matrix.c \
-	jump_bootloader.c \
-	print.c
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4        # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Object files directory
-#     To put object files in current directory, use a dot (.), do NOT make
-#     this an empty or blank macro!
-OBJDIR = .
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = 
-
-
-# List Assembler source files here.
-#     Make them always end in a capital .S.  Files ending in a lowercase .s
-#     will not be considered source files but generated files (assembler
-#     output from the compiler), and will be deleted upon "make clean"!
-#     Even though the DOS/Win* filesystem matches both .s and .S the same,
-#     it will preserve the spelling of the filenames, and gcc itself does
-#     care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s]. 
-#     0 = turn off optimization. s = optimize for size.
-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-
-
-# Debugging format.
-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-#     AVR Studio 4.10 requires dwarf-2.
-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-#     Each directory must be seperated by a space.
-#     Use forward slashes for directory separators.
-#     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = 
-
-
-# Compiler flag to set the C Standard level.
-#     c89   = "ANSI" C
-#     gnu89 = c89 plus GCC extensions
-#     c99   = ISO C99 standard (not yet fully implemented)
-#     gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-#  -g*:          generate debugging information
-#  -O*:          optimization level
-#  -f...:        tuning, see GCC manual and avr-libc documentation
-#  -Wall...:     warning level
-#  -Wa,...:      tell GCC to pass this to the assembler.
-#    -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-#  -g*:          generate debugging information
-#  -O*:          optimization level
-#  -f...:        tuning, see GCC manual and avr-libc documentation
-#  -Wall...:     warning level
-#  -Wa,...:      tell GCC to pass this to the assembler.
-#    -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-#  -Wa,...:   tell GCC to pass this to the assembler.
-#  -adhlns:   create listing
-#  -gstabs:   have the assembler create line number information; note that
-#             for use in COFF files, additional information about filenames
-#             and function names needs to be present in the assembler source
-#             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
-#       dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = 
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = 
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-#     Each directory must be seperated by a space.
-#     Use forward slashes for directory separators.
-#     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-#  -Wl,...:     tell GCC to pass this to linker.
-#    -Map:      create map file
-#    --cref:    add cross reference to  map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = stk500v2
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = com1    # programmer connected to serial device
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
-#     avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before: 
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
-	@echo
-	@echo $(MSG_BEGIN)
-
-end:
-	@echo $(MSG_END)
-	@echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
-ELFSIZE = $(SIZE) $(TARGET).elf
-
-sizebefore:
-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
-	2>/dev/null; echo; fi
-
-sizeafter:
-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
-	2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion : 
-	@$(CC) --version
-
-
-
-# Program the device.  
-program: $(TARGET).hex $(TARGET).eep
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-# Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
-#     a breakpoint at main().
-gdb-config: 
-	@$(REMOVE) $(GDBINIT_FILE)
-	@echo define reset >> $(GDBINIT_FILE)
-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
-	@echo end >> $(GDBINIT_FILE)
-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
-	@echo load  >> $(GDBINIT_FILE)
-endif
-	@echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
-	@$(WINSHELL) /c pause
-
-else
-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
-	@echo
-	@echo $(MSG_COFF) $(TARGET).cof
-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
-	@echo
-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
-	@echo
-	@echo $(MSG_FLASH) $@
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
-	@echo
-	@echo $(MSG_EEPROM) $@
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
-	@echo
-	@echo $(MSG_EXTENDED_LISTING) $@
-	$(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
-	@echo
-	@echo $(MSG_SYMBOL_TABLE) $@
-	$(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
-	@echo
-	@echo $(MSG_CREATING_LIBRARY) $@
-	$(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
-	@echo
-	@echo $(MSG_LINKING) $@
-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
-	@echo
-	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
-	@echo
-	@echo $(MSG_COMPILING_CPP) $<
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
-	$(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
-	@echo
-	@echo $(MSG_ASSEMBLING) $<
-	$(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
-	@echo
-	@echo $(MSG_CLEANING)
-	$(REMOVE) $(TARGET).hex
-	$(REMOVE) $(TARGET).eep
-	$(REMOVE) $(TARGET).cof
-	$(REMOVE) $(TARGET).elf
-	$(REMOVE) $(TARGET).map
-	$(REMOVE) $(TARGET).sym
-	$(REMOVE) $(TARGET).lss
-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
-	$(REMOVE) $(SRC:.c=.s)
-	$(REMOVE) $(SRC:.c=.d)
-	$(REMOVE) $(SRC:.c=.i)
-	$(REMOVEDIR) .dep
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff \
-clean clean_list program debug gdb-config
diff --git a/README b/README
index 1dc82ae22..c06c6cba3 100644
--- a/README
+++ b/README
@@ -2,7 +2,7 @@ t.m.k. Keyboard Firmware
 ========================
 http://github.com/tmk/tmk_keyboard
 
-This is keyboard firmware for PFU HHKB style keyboard and teensy 2.0.
+This is keyboard firmware for PFU HHKB style keyboard and Teensy/Teensy++ 2.0.
 OS see this as composite device which has keyboard and mouse.
 
 The project is heavily based on PJRC USB Keyboard/Mouse Example and
@@ -31,10 +31,23 @@ Version
         Matrix wiring changed for casing.
         (and my Teensy PD3 seems to be latchuped and unusable. :<)
 
+1.2     2010/10/13
+        HHKB support
+        horizontal mouse wheel support
+        change keymaps
 
-Target board
-------------
-Teensy 2.0
+
+Build
+-----
+Compiling sources need AVR GCC, AVR Libc and GNU make.(You can use WinAVR on Windows.)
+
+$ cd <target> (hhkb or macway)
+$ make
+
+
+AVR Target board
+----------------
+Teensy/Teensy++
 http://www.pjrc.com/teensy
 
 
@@ -72,8 +85,6 @@ debouncing logic
     bouncing doesnt occur on my ALPS switch so far.
     scan rate is too slow?(to be measure)
 
-support for HHKB pro matrix signal
-    exchange controller board with teensy
 Trackpoint(PS/2)
     receive PS/2 signal from TrackPoint
     send USB HID report
@@ -90,6 +101,13 @@ setting menu(configure without changing firmware)
     matrix display
 PS/2 keyboard mode
     with USB to PS/2 dumb adapter(possible?)
+AT90USBKEY support
+    and other AVR USB boards
+
+DONE:
+support for HHKB pro matrix signal
+    exchange controller board with teensy
+    2010/10/11
 
 
 EOF
diff --git a/hhkb/Makefile b/hhkb/Makefile
new file mode 100644
index 000000000..980980cfe
--- /dev/null
+++ b/hhkb/Makefile
@@ -0,0 +1,72 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# Target file name (without extension).
+TARGET = tmk_hhkb
+
+# Directory common source filess exist
+COMMON_DIR = ..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+TARGET_SRC =	keymap.c \
+  	        matrix.c
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+#MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+include $(COMMON_DIR)/Makefile.common
diff --git a/HHKB/HHKB.txt b/hhkb/doc/HHKB.txt
index 9440efebf..9440efebf 100644
--- a/HHKB/HHKB.txt
+++ b/hhkb/doc/HHKB.txt
diff --git a/HHKB/HHKB_TP1684.jpg b/hhkb/doc/HHKB_TP1684.jpg
index 7ff3573e2..0a0316409 100755
--- a/HHKB/HHKB_TP1684.jpg
+++ b/hhkb/doc/HHKB_TP1684.jpg
diff --git a/HHKB/HHKB_chart1.jpg b/hhkb/doc/HHKB_chart1.jpg
index 1f09bd185..1f09bd185 100755
--- a/HHKB/HHKB_chart1.jpg
+++ b/hhkb/doc/HHKB_chart1.jpg
diff --git a/HHKB/HHKB_chart2.jpg b/hhkb/doc/HHKB_chart2.jpg
index 45f5ada90..45f5ada90 100755
--- a/HHKB/HHKB_chart2.jpg
+++ b/hhkb/doc/HHKB_chart2.jpg
diff --git a/HHKB/HHKB_connector.jpg b/hhkb/doc/HHKB_connector.jpg
index e8a09e9b2..e8a09e9b2 100755
--- a/HHKB/HHKB_connector.jpg
+++ b/hhkb/doc/HHKB_connector.jpg
diff --git a/HHKB/HHKB_controller.jpg b/hhkb/doc/HHKB_controller.jpg
index e3dae8e86..e3dae8e86 100755
--- a/HHKB/HHKB_controller.jpg
+++ b/hhkb/doc/HHKB_controller.jpg
diff --git a/HHKB/HHKB_keyswitch.jpg b/hhkb/doc/HHKB_keyswitch.jpg
index 3afc269e7..3afc269e7 100755
--- a/HHKB/HHKB_keyswitch.jpg
+++ b/hhkb/doc/HHKB_keyswitch.jpg
diff --git a/HHKB/connector_contact.jpg b/hhkb/doc/connector_contact.jpg
index 5304bc8d7..5304bc8d7 100755
--- a/HHKB/connector_contact.jpg
+++ b/hhkb/doc/connector_contact.jpg
diff --git a/HHKB/logic_analyzer.jpg b/hhkb/doc/logic_analyzer.jpg
index f1b438ae7..f1b438ae7 100755
--- a/HHKB/logic_analyzer.jpg
+++ b/hhkb/doc/logic_analyzer.jpg
diff --git a/HHKB/probe_contact.jpg b/hhkb/doc/probe_contact.jpg
index dc79afa0c..dc79afa0c 100755
--- a/HHKB/probe_contact.jpg
+++ b/hhkb/doc/probe_contact.jpg
diff --git a/HHKB/teensy_install.jpg b/hhkb/doc/teensy_install.jpg
index 873d988ed..873d988ed 100755
--- a/HHKB/teensy_install.jpg
+++ b/hhkb/doc/teensy_install.jpg
diff --git a/HHKB/teensy_wiring.jpg b/hhkb/doc/teensy_wiring.jpg
index 1c4eb6743..1c4eb6743 100755
--- a/HHKB/teensy_wiring.jpg
+++ b/hhkb/doc/teensy_wiring.jpg
diff --git a/keymap_hhkb.c b/hhkb/keymap.c
index 7074df411..d7e6bbe3b 100644
--- a/keymap_hhkb.c
+++ b/hhkb/keymap.c
@@ -1,10 +1,10 @@
 /* 
- * keymap for modified macway keyboarq
+ * keymap for HHKB pro
  */
 #include <stdbool.h>
 #include <avr/pgmspace.h>
 #include "matrix.h"
-#include "keymap_hhkb.h"
+#include "keymap.h"
 #include "usb_keyboard.h"
 
 int current_layer = 0;
diff --git a/keymap_hhkb.h b/hhkb/keymap.h
index 1c2d100e6..be78609e6 100644
--- a/keymap_hhkb.h
+++ b/hhkb/keymap.h
@@ -2,6 +2,7 @@
 #define KEYMAP_H 1
 
 #include <stdint.h>
+#include <stdbool.h>
 #include "usb_keycodes.h"
 
 
diff --git a/matrix_hhkb.c b/hhkb/matrix.c
index d1c0003b4..3034a6361 100644
--- a/matrix_hhkb.c
+++ b/hhkb/matrix.c
@@ -50,7 +50,6 @@ void matrix_init(void)
 
 uint8_t matrix_scan(void)
 {
-    uint8_t state;
     uint8_t *tmp;
 
     tmp = matrix_prev;
@@ -59,12 +58,10 @@ uint8_t matrix_scan(void)
 
     for (int row = 0; row < MATRIX_ROWS; row++) {
         for (int col = 0; col < MATRIX_COLS; col++) {
-//print("scan: "); phex(row); phex(col); print("\n");
             KEY_SELELCT(row, col);
             _delay_us(50);  // from logic analyzer chart
             KEY_ENABLE;
             _delay_us(10);  // from logic analyzer chart
-//print("PINE: "); phex(PINE); print("\n");
             if (KEY_ON) {
                 matrix[row] &= ~(1<<col);
             } else {
diff --git a/key_process.c b/key_process.c
new file mode 100644
index 000000000..0bce91883
--- /dev/null
+++ b/key_process.c
@@ -0,0 +1,174 @@
+// TODO: clean unused headers
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "usb.h"
+#include "usb_keyboard.h"
+#include "usb_mouse.h"
+#include "print.h"
+#include "matrix.h"
+#include "keymap.h"
+#include "jump_bootloader.h"
+
+#include "key_process.h"
+
+
+// for Teensy/Teensy++ 2.0
+#define LED_CONFIG    (DDRD |= (1<<6))
+#define LED_ON        (PORTD |= (1<<6))
+#define LED_OFF       (PORTD &= ~(1<<6))
+
+#define MOUSE_MOVE_UNIT 10
+#define MOUSE_DELAY_MS 200
+#define MOUSE_DELAY_ACC 5
+
+
+
+static void print_matrix(void);
+static void print_keys(void);
+static void print_mouse(int8_t mouse_x, int8_t mouse_y, int8_t wheel_v, int8_t wheel_h);
+
+void proc_matrix(void) {
+    static int mouse_repeat = 0;
+
+    bool modified = false;
+    bool has_ghost = false;
+    int layer = 0;
+    int key_index = 0;
+    uint8_t mouse_btn = 0;
+    int8_t mouse_x = 0;
+    int8_t mouse_y = 0;
+    int8_t mouse_wheel = 0;
+    int8_t mouse_hwheel = 0;
+
+        matrix_scan();
+        modified = matrix_is_modified();
+        has_ghost = matrix_has_ghost();
+        layer = get_layer();
+
+        // print matrix state for debug
+        if (modified) {
+            print_matrix();
+
+            // LED flash for debug
+            LED_CONFIG;
+            LED_ON;
+        }
+
+        keyboard_modifier_keys = 0;
+        for (int i = 0; i < 3; i++) keyboard_keys[i] = KB_NO;
+        key_index = 0;
+        mouse_btn = 0;
+        mouse_x = 0;
+        mouse_y = 0;
+        mouse_wheel = 0;
+        mouse_hwheel = 0;
+
+        // convert matrix state to HID report
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            for (int col = 0; col < MATRIX_COLS; col++) {
+                if (matrix[row] & 1<<col) continue;
+
+                uint8_t code = get_keycode(layer, row, col);
+                if (code == KB_NO) {
+                    continue;
+                } else if (KB_LCTRL <= code && code <= KB_RGUI) {
+                    // modifier keys(0xE0-0xE7)
+                    keyboard_modifier_keys |= 1<<(code & 0x07);
+                } else if (code >= MS_UP) {
+                    // mouse
+                    if (code == MS_UP)    mouse_y -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+                    if (code == MS_DOWN)  mouse_y += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+                    if (code == MS_LEFT)  mouse_x -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+                    if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
+                    if (code == MS_BTN1)  mouse_btn |= 1<<0;
+                    if (code == MS_BTN2)  mouse_btn |= 1<<1;
+                    if (code == MS_BTN3)  mouse_btn |= 1<<2;
+                    if (code == MS_BTN4)  mouse_btn |= 1<<3;
+                    if (code == MS_BTN5)  mouse_btn |= 1<<4;
+                    if (code == MS_WH_UP)  mouse_wheel += 1;
+                    if (code == MS_WH_DOWN)  mouse_wheel -= 1;
+                    if (code == MS_WH_LEFT)  mouse_hwheel -= 1;
+                    if (code == MS_WH_RIGHT) mouse_hwheel += 1;
+                } else {
+                    // normal keys
+                    if (key_index < 6)
+                        keyboard_keys[key_index] = code;
+                    key_index++;
+                }
+            }
+        }
+
+        if (!has_ghost)  {
+            // when 4 left modifier keys down
+            if (keyboard_modifier_keys == (MOD_LCTRL | MOD_LSHIFT | MOD_LALT | MOD_LGUI)) {
+                // cancel all keys
+                keyboard_modifier_keys = 0;
+                for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
+                usb_keyboard_send();
+
+                print("jump to bootloader...\n");
+                _delay_ms(100);
+                jump_bootloader(); // not return
+            }
+
+            if (mouse_x || mouse_y || mouse_wheel || mouse_hwheel || mouse_btn != mouse_buttons) {
+                mouse_buttons = mouse_btn;
+                usb_mouse_move(mouse_x, mouse_y, mouse_wheel, mouse_hwheel);
+                print_mouse(mouse_x, mouse_y, mouse_wheel, mouse_hwheel);
+                key_sent = true;
+
+                // acceleration
+                _delay_ms(MOUSE_DELAY_MS >> (mouse_repeat < MOUSE_DELAY_ACC ? mouse_repeat : MOUSE_DELAY_ACC));
+                mouse_repeat++;
+            } else {
+                mouse_repeat = 0;
+            }
+
+
+            // send keys to host
+            if (modified) {
+                if (key_index > 6) {
+                    //Rollover
+                }
+                usb_keyboard_send();
+                if (keyboard_keys[0])
+                    key_sent = true;
+
+                print_keys();
+                // LED flash for debug
+                LED_CONFIG;
+                LED_OFF;
+            }
+        }
+}
+
+static void print_matrix(void) {
+    print("\nr/c 01234567\n");
+    for (int row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix[row]);
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+        print("\n");
+    }
+}
+
+static void print_keys(void) {
+    print("\nkeys: ");
+    for (int i = 0; i < 6; i++) { phex(keyboard_keys[i]); print(" "); }
+    print("\n");
+    print("mods: "); phex(keyboard_modifier_keys); print("\n");
+}
+
+static void print_mouse(int8_t mouse_x, int8_t mouse_y, int8_t wheel_v, int8_t wheel_h) {
+    print("\nmouse_x y v h: ");
+    phex(mouse_x); print(" ");
+    phex(mouse_y); print(" ");
+    phex(wheel_v); print(" ");
+    phex(wheel_h); print("\n");
+    print("buttons: "); phex(mouse_buttons); print("\n");
+}
diff --git a/key_process.h b/key_process.h
new file mode 100644
index 000000000..10577dd5b
--- /dev/null
+++ b/key_process.h
@@ -0,0 +1,6 @@
+#ifndef KEY_PROCESS_H
+#define  KEY_PROCESS_H 1
+
+void proc_matrix(void);
+
+#endif
diff --git a/macway/Makefile b/macway/Makefile
new file mode 100644
index 000000000..7559b2b05
--- /dev/null
+++ b/macway/Makefile
@@ -0,0 +1,67 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# Target file name (without extension).
+TARGET = tmk_macway
+
+COMMON_DIR = ..
+TARGET_DIR = .
+TARGET_SRC =	$(TARGET_DIR)/keymap.c \
+  	        $(TARGET_DIR)/matrix.c
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+include $(COMMON_DIR)/Makefile.common
diff --git a/keymap.c b/macway/keymap.c
index b5d83cbc8..c690ce43a 100644
--- a/keymap.c
+++ b/macway/keymap.c
@@ -1,11 +1,14 @@
 /* 
- * keymap for modified macway keyboarq
+ * keymap for modified Macway
  */
+#include <stdbool.h>
 #include <avr/pgmspace.h>
 #include "matrix.h"
 #include "keymap.h"
+#include "usb_keyboard.h"
 
 int current_layer = 0;
+bool key_sent = false;
 
 /*
  * Layer0(Default Layer)
diff --git a/keymap.h b/macway/keymap.h
index 6b95fb61f..b428b47a8 100644
--- a/keymap.h
+++ b/macway/keymap.h
@@ -2,12 +2,19 @@
 #define KEYMAP_H 1
 
 #include <stdint.h>
+#include <stdbool.h>
 #include "usb_keycodes.h"
 
-int get_layer(void);
-uint8_t get_keycode(int layer, int row, int col);
 
 #define MATRIX_ROWS 9
 #define MATRIX_COLS 8
 
+
+extern int current_layer;
+extern bool key_sent;
+
+
+int get_layer(void);
+uint8_t get_keycode(int layer, int row, int col);
+
 #endif
diff --git a/matrix.c b/macway/matrix.c
index cb52d79c3..cb52d79c3 100644
--- a/matrix.c
+++ b/macway/matrix.c
diff --git a/tmk.c b/tmk.c
index 7af0c748c..c01972514 100644
--- a/tmk.c
+++ b/tmk.c
@@ -24,6 +24,7 @@
  * THE SOFTWARE.
  */
 
+// TODO: clean unused headers
 #include <stdbool.h>
 #include <avr/io.h>
 #include <avr/pgmspace.h>
@@ -34,22 +35,18 @@
 #include "usb_mouse.h"
 #include "print.h"
 #include "matrix.h"
-#include "keymap_hhkb.h"
+#include "keymap.h"
 #include "jump_bootloader.h"
 
+#include "key_process.h"
 
-// for teensy 2.0
+#define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))
+
+// TODO: should go to hardware dependent file
+// for Teensy/Teensy++ 2.0
 #define LED_CONFIG    (DDRD |= (1<<6))
 #define LED_ON        (PORTD |= (1<<6))
 #define LED_OFF       (PORTD &= ~(1<<6))
-#define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))
-
-#define MOUSE_MOVE_UNIT 10
-#define MOUSE_DELAY_MS 200
-#define MOUSE_DELAY_ACC 5
-
-
-static void print_matrix(void);
 
 
 uint16_t idle_count=0;
@@ -88,137 +85,13 @@ int main(void)
 
 
     matrix_init();
-
-    bool modified = false;
-    bool has_ghost = false;
-    int layer = 0;
-    int key_index = 0;
-    uint8_t mouse_x = 0;
-    uint8_t mouse_y = 0;
-    uint8_t mouse_btn = 0;
-    int8_t mouse_wheel = 0;
-    int8_t mouse_hwheel = 0;
-    int mouse_repeat = 0;
-
-    print("\nt.m.k. keyboard 1.0 for hhkb\n");
+    print("\nt.m.k. keyboard 1.2\n");
     while (1) {
-        matrix_scan();
-        modified = matrix_is_modified();
-        has_ghost = matrix_has_ghost();
-        layer = get_layer();
-
-        // print matrix state for debug
-        if (modified) {
-            print_matrix();
-
-            // LED flash for debug
-            LED_CONFIG;
-            LED_ON;
-        }
-
-        keyboard_modifier_keys = 0;
-        for (int i = 0; i < 3; i++) keyboard_keys[i] = KB_NO;
-        key_index = 0;
-        mouse_x = 0;
-        mouse_y = 0;
-        mouse_btn = 0;
-        mouse_wheel = 0;
-        mouse_hwheel = 0;
-
-        // convert matrix state to HID report
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            for (int col = 0; col < MATRIX_COLS; col++) {
-                if (matrix[row] & 1<<col) continue;
-
-                uint8_t code = get_keycode(layer, row, col);
-                if (code == KB_NO) {
-                    continue;
-                } else if (KB_LCTRL <= code && code <= KB_RGUI) {
-                    // modifier keys(0xE0-0xE7)
-                    keyboard_modifier_keys |= 1<<(code & 0x07);
-                } else if (code >= MS_UP) {
-                    // mouse
-                    if (code == MS_UP)    mouse_y -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
-                    if (code == MS_DOWN)  mouse_y += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
-                    if (code == MS_LEFT)  mouse_x -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
-                    if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
-                    if (code == MS_BTN1)  mouse_btn |= 1<<0;
-                    if (code == MS_BTN2)  mouse_btn |= 1<<1;
-                    if (code == MS_BTN3)  mouse_btn |= 1<<2;
-                    if (code == MS_BTN4)  mouse_btn |= 1<<3;
-                    if (code == MS_BTN5)  mouse_btn |= 1<<4;
-                    if (code == MS_WH_UP)  mouse_wheel += 1;
-                    if (code == MS_WH_DOWN)  mouse_wheel -= 1;
-                    if (code == MS_WH_LEFT)  mouse_hwheel -= 1;
-                    if (code == MS_WH_RIGHT) mouse_hwheel += 1;
-                } else {
-                    // normal keys
-                    if (key_index < 6)
-                        keyboard_keys[key_index] = code;
-                    key_index++;
-                }
-            }
-        }
-
-        if (!has_ghost)  {
-            // when 4 left modifier keys down
-            if (keyboard_modifier_keys == (MOD_LCTRL | MOD_LSHIFT | MOD_LALT | MOD_LGUI)) {
-                // cancel all keys
-                keyboard_modifier_keys = 0;
-                for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
-                usb_keyboard_send();
-
-                print("jump to bootloader...\n");
-                _delay_ms(100);
-                jump_bootloader(); // not return
-            }
-
-            if (mouse_x || mouse_y || mouse_wheel || mouse_hwheel || mouse_btn != mouse_buttons) {
-                mouse_buttons = mouse_btn;
-                usb_mouse_move(mouse_x, mouse_y, mouse_wheel, mouse_hwheel);
-                key_sent = true;
-
-                // acceleration
-                _delay_ms(MOUSE_DELAY_MS >> (mouse_repeat < MOUSE_DELAY_ACC ? mouse_repeat : MOUSE_DELAY_ACC));
-                mouse_repeat++;
-            } else {
-                mouse_repeat = 0;
-            }
-
-
-            // send keys to host
-            if (modified) {
-                if (key_index > 6) {
-                    //Rollover
-                }
-                usb_keyboard_send();
-                if (keyboard_keys[0])
-                    key_sent = true;
-
-                // LED flash for debug
-                LED_CONFIG;
-                LED_OFF;
-            }
-        }
+       proc_matrix(); 
         _delay_ms(2);
     }
 }
 
-static void print_matrix(void) {
-            print("\nr/c 01234567\n");
-            for (int row = 0; row < MATRIX_ROWS; row++) {
-                phex(row); print(": ");
-                pbin_reverse(matrix[row]);
-                if (matrix_has_ghost_in_row(row)) {
-                    print(" <ghost");
-                }
-                print("\n");
-            }
-            print("keys: ");
-            for (int i = 0; i < 6; i++) { phex(keyboard_keys[i]); print(" "); }
-            print("\n");
-            print("mod: "); phex(keyboard_modifier_keys); print("\n");
-}
 
 // This interrupt routine is run approx 61 times per second.
 // A very simple inactivity timeout is implemented, where we