aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGravatar Sergey Vlasov <sigprof@gmail.com>2020-04-29 13:52:15 +0300
committerGravatar GitHub <noreply@github.com>2020-04-29 03:52:15 -0700
commit8fdb229b661e2f9d5e493a83c2efa6765f3b5f4d (patch)
treea373fd4b7f95c4ff6e5f9834b428854b62275565
parentfd3456f362b3cacbd1506f12280dd42e38e98950 (diff)
downloadqmk_firmware-8fdb229b661e2f9d5e493a83c2efa6765f3b5f4d.tar.gz
[Keyboard] id80: Transpose matrix to use faster COL2ROW routines (#8930)
* id80: Transpose matrix to use faster COL2ROW routines Even the standard QMK matrix_scan() function can give about 2 times higher scan rate (if compiled with optimizations enabled) if the COL2ROW matrix layout is used instead of ROW2COL. Although the ID80 PCB is wired using the ROW2COL matrix layout, it is possible to transpose the matrix from the QMK standpoint, so that "columns" would correspond to horizontal connections, and "rows" would correspond to (mostly) vertical connections; in this case the matrix could be handled as if it had the COL2ROW layout. The matrix layout change makes the older VIA JSON layout definition incompatible, but the corresponding JSON was not yet accepted to the VIA repository, so it should still be safe to make this change. * id80: Remove obsolete comments
-rw-r--r--keyboards/id80/config.h28
-rw-r--r--keyboards/id80/id80.h23
2 files changed, 26 insertions, 25 deletions
diff --git a/keyboards/id80/config.h b/keyboards/id80/config.h
index 12ee5400c..936fd5b2e 100644
--- a/keyboards/id80/config.h
+++ b/keyboards/id80/config.h
@@ -28,8 +28,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DESCRIPTION A 75% hotswap keyboard
/* key matrix size */
-#define MATRIX_ROWS 11
-#define MATRIX_COLS 9
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 11
/*
* Keyboard Matrix Assignments
@@ -41,16 +41,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
* The matrix description in the vendor-supplied JSON file for kbfirmware.com
- * had 12 rows:
+ * had 9 columns:
+ * { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+ * and 12 rows:
* { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 }
* However, the row 6 was completely empty, and the pin F0 was not actually
* routed anywhere on the PCB, therefore this row was removed to save some
* resources (the EEPROM space for dynamic keymaps is especially scarce).
+ *
+ * After doing the above change, the matrix was transposed (rows and columns
+ * were swapped), because a matrix with the COL2ROW layout can be scanned much
+ * more efficiently than a matrix with the ROW2COL layout (depending on various
+ * optimizations, the difference in scan rate can be over 2 times). Because of
+ * this, the "columns" in the matrix layout now mostly correspond to physical
+ * rows, and the "rows" have mostly vertical physical orientation.
*/
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0, E6, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+#define MATRIX_COL_PINS { B7, B3, B2, B1, B0, E6, F1, F4, F5, F6, F7 }
-#define DIODE_DIRECTION ROW2COL
+#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN B6
// #define BACKLIGHT_BREATHING
@@ -81,8 +90,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
/* Bootmagic Lite key configuration: use the Esc key */
-#define BOOTMAGIC_LITE_ROW 5
-#define BOOTMAGIC_LITE_COLUMN 0
-
-// partially generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 5
diff --git a/keyboards/id80/id80.h b/keyboards/id80/id80.h
index 2f2cab71b..94626fe4f 100644
--- a/keyboards/id80/id80.h
+++ b/keyboards/id80/id80.h
@@ -25,18 +25,13 @@
K10, K12, K13, K14, K15, K16, K17, K18, K68, K67, K65, K64, K63, \
K00, K01, K02, K06, K08, K07, K05, K04, K03 \
) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
- { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18 }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
- { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
- { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
- { KC_NO, KC_NO, KC_NO, K63, K64, K65, KC_NO, K67, K68 }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, K74, K75, KC_NO, K77, K78 }, \
- { KC_NO, KC_NO, K82, K83, K84, K85, KC_NO, K87, K88 }, \
- { KC_NO, KC_NO, K92, KC_NO, K94, K95, K96, K97, K98 }, \
- { KC_NO, KC_NO, KA2, KA3, KA4, KA5, KA6, KA7, KC_NO }, \
+ { K00, K10, K20, K30, K40, K50, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { K01, KC_NO, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, K82, K92, KA2 }, \
+ { K03, K13, K23, K33, K43, K53, K63, KC_NO, K83, KC_NO, KA3 }, \
+ { K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4 }, \
+ { K05, K15, K25, K35, K45, K55, K65, K75, K85, K95, KA5 }, \
+ { K06, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, K96, KA6 }, \
+ { K07, K17, K27, K37, K47, K57, K67, K77, K87, K97, KA7 }, \
+ { K08, K18, K28, K38, K48, K58, K68, K78, K88, K98, KC_NO }, \
}
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/