Merge remote-tracking branch 'refs/remotes/jackhumbert/master'

22 files changed, 1234 insertions, 9 deletions

diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile
index 95ee1d4d7..5894d231f 100644
--- a/keyboards/atreus/Makefile
+++ b/keyboards/atreus/Makefile
@@ -2,11 +2,11 @@
 
 ifdef TEENSY2
     OPT_DEFS += -DATREUS_TEENSY2
-    ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
     OPT_DEFS += -DATREUS_ASTAR
     OPT_DEFS += -DCATERINA_BOOTLOADER
-    ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
 
@@ -84,5 +84,5 @@ endif
 USB ?= /dev/cu.usbmodem1411
 
 upload: build
-	$(ATRUES_UPLOAD_COMMAND)
-	
\ No newline at end of file
+	$(ATREUS_UPLOAD_COMMAND)
+	
diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c
index 447fbcf10..b418cc9b5 100644
--- a/keyboards/atreus/keymaps/xyverz/keymap.c
+++ b/keyboards/atreus/keymaps/xyverz/keymap.c
@@ -46,14 +46,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_L1] = { /* LAYER 1 */
     {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_NO,   KC_6,    KC_7,    KC_8,    KC_9,    KC_0   },
     {KC_TAB,  KC_INS,  KC_UP,   KC_DEL,  KC_HOME, KC_NO,   KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL },
-    {KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
+    {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS},
     {KC_TRNS, KC_GRV,  KC_LGUI, KC_TRNS, KC_DEL,  KC_LALT, KC_SPC,  KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT }
   },
   [_L2] = { /* LAYER 2 */
     {KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_NO,   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN},
-    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 },
-    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12 },
-    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
+    {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_NO,   KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_PLUS},
+    {KC_TRNS, KC_TRNS, DVORAK,  QWERTY,  COLEMAK, KC_LCTL, KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12 },
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC,  KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET}
   }
 };
 
diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c
new file mode 100644
index 000000000..c5ce99dd2
--- /dev/null
+++ b/keyboards/ergodox/keymaps/xyverz/keymap.c
@@ -0,0 +1,311 @@
+/*
+ * The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak
+ * software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner
+ * keys. I've decided to continue using this layout with my ErgoDox.
+ *
+ * The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional
+ * keys as shown in the diagrams. The Colemak layout is merely an adaptation of that.
+ *
+ * I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck
+ * layouts.
+ * 
+ * For a better explanation of the layout matrices shown below, take a look at ../../ez/ez.h where the
+ * keymap is defined, beginning on line 81.
+ *
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0 // Dvorak layer
+#define _QW 1 // Qwerty layer
+#define _CM 2 // Colemak layer
+#define _MD 3 // Media Layer
+#define _KP 4 // Keypad Layer
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Dvorak layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ]    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   [    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   '  |   ,  |   .  |   Y  |   Y  |      |           |      |   F  |   G  |   C  |   R  |   L  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |   -    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   /  |   =  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ *
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_DV] = {  // layer 0 : Dvorak
+        // left hand
+	{KC_RBRC, KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_QUOT, KC_A,    KC_SCLN, KC_GRV,  KC_END },
+	{KC_2,    KC_COMM, KC_O,    KC_Q,    KC_INS,  KC_DEL },
+	{KC_3,    KC_DOT,  KC_E,    KC_J,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_P,    KC_U,    KC_K,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_Y,    KC_I,    KC_X,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_F,    KC_D,    KC_B,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_G,    KC_H,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_C,    KC_T,    KC_W,    KC_DOWN, KC_SPC },
+	{KC_9,    KC_R,    KC_N,    KC_V,    KC_SLSH, KC_ENT },
+	{KC_0,    KC_L,    KC_S,    KC_Z,    KC_EQL,  KC_PGDN},
+	{KC_LBRC, KC_BSLS, KC_MINS, KC_RSFT, KC_RGUI, KC_NO  }
+},
+
+/* Keymap 1: QWERTY layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   E  |   R  |   T  |      |           |      |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |   '    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_QW] = {  // layer 1 : QWERTY
+        // left hand
+	{KC_EQL,  KC_TAB,  KC_CAPS, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
+	{KC_2,    KC_W,    KC_S,    KC_X,    KC_INS,  KC_DEL },
+	{KC_3,    KC_E,    KC_D,    KC_C,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_R,    KC_F,    KC_V,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_T,    KC_G,    KC_B,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_Y,    KC_H,    KC_N,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_U,    KC_J,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_I,    KC_K,    KC_COMM, KC_DOWN, KC_SPC },
+	{KC_9,    KC_O,    KC_L,    KC_DOT,  KC_LBRC, KC_ENT },
+	{KC_0,    KC_P,    KC_SCLN, KC_SLSH, KC_RBRC, KC_PGDN},
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+  },
+
+/* Keymap 2: Colemak layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | ESC  |           | ESC  |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   F  |   P  |   G  |      |           |      |   J  |   L  |   U  |   Y  |   ;  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSpc  |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |   O  |   '    |
+ * |--------+------+------+------+------+------| _MD  |           | _KP  |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LGUI |   `  |  INS | Left | Rght |                                       |  Up  |  Dn  |   [  |   ]  | RGUI |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | LCtr | LAlt |       | Ralt | RCtr |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      | Home |       | PgUp |      |      |
+ *                                 | BkSp | Del  |------|       |------| Enter| Space|
+ *                                 |      |      | End  |       | PgDn |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[_CM] = {  // layer 2 : Colemak
+        // left hand
+	{KC_EQL,  KC_TAB,  KC_BSPC, KC_LSFT, KC_LGUI, KC_NO  },
+	{KC_1,    KC_Q,    KC_A,    KC_Z,    KC_GRV,  KC_END },
+	{KC_2,    KC_W,    KC_R,    KC_X,    KC_INS,  KC_DEL },
+	{KC_3,    KC_F,    KC_S,    KC_C,    KC_LEFT, KC_BSPC},
+	{KC_4,    KC_P,    KC_T,    KC_V,    KC_RGHT, KC_HOME},
+	{KC_5,    KC_G,    KC_D,    KC_B,    KC_NO,   KC_LCTL},
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_MD), KC_NO,   KC_LALT},
+
+	// right hand
+	{KC_ESC,  KC_NO,   KC_NO,   MO(_KP), KC_NO,   KC_RALT},
+	{KC_6,    KC_J,    KC_H,    KC_K,    KC_NO,   KC_RCTL},
+	{KC_7,    KC_L,    KC_N,    KC_M,    KC_UP,   KC_PGUP},
+	{KC_8,    KC_U,    KC_E,    KC_COMM, KC_DOWN, KC_SPC },
+	{KC_9,    KC_Y,    KC_I,    KC_DOT,  KC_LBRC, KC_ENT },
+	{KC_0,    KC_SCLN, KC_O,    KC_SLSH, KC_RBRC, KC_PGDN},
+	{KC_MINS, KC_BSLS, KC_QUOT, KC_RSFT, KC_RGUI, KC_NO  }
+  },
+
+/* Keymap 3: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | TEENSY |  F1  |  F2  |  F3  |  F4  |  F5  | F11  |           |  F12 |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      | PrSc | ScLk | Paus |      | FN4  |           |  FN5 |      | Mute | Vol- | Vol+ |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------| Stop | Prev | Play | Next | Sel  |        |
+ * |--------+------+------+------+------+------| FN4  |           |  FN5 |------+------+------+------+------+--------|
+ * |        |      |Dvorak|Qwerty|Colemk|      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Media Layer
+[_MD] = { // layer 3 : Media layer
+        // left hand
+	{RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  },
+	{KC_F1,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F2,   KC_PSCR, KC_TRNS, DVORAK,  KC_TRNS, KC_TRNS},
+	{KC_F3,   KC_SLCK, KC_TRNS, QWERTY,  KC_TRNS, KC_TRNS},
+	{KC_F4,   KC_PAUS, KC_TRNS, COLEMAK, KC_TRNS, KC_TRNS},
+	{KC_F5,   KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F11,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+
+	// right hand
+	{KC_F12,  KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F6,   KC_TRNS, KC_MSTP, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_F7,   KC_MUTE, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F8,   KC_VOLD, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F9,   KC_VOLU, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_F10,  KC_TRNS, KC_MSEL, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO  }
+  },
+
+/* Keymap 4: Keypad layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Power  |      |      |      |      |      |      |           |      |      | NmLk | KP / | KP * | KP - |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Sleep  |      |      |      |      |      | FN5  |           |  FN4 |      | KP 7 | KP 8 | KP 9 | KP + |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Wake   |      |      |      |      |      |------|           |------|      | KP 4 | KP 5 | KP 6 | KP + |        |
+ * |--------+------+------+------+------+------| FN5  |           |  FN4 |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      | KP 1 | KP 2 | KP 3 |KP Ent|        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       | KP 0 |      | KP . |KP Ent|      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Keypad Layer
+[_KP] = { // layer 4 : Keypad layer
+        // left hand
+	{KC_PWR,  KC_SLEP, KC_WAKE, KC_TRNS, KC_TRNS, KC_NO  },
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+
+	// right hand
+	{KC_TRNS, KC_NO,   KC_NO,   KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_TRNS},
+	{KC_NLCK, KC_P7,   KC_P4,   KC_P1,   KC_P0,   KC_TRNS},
+	{KC_PSLS, KC_P8,   KC_P5,   KC_P2,   KC_NO,   KC_TRNS},
+	{KC_PAST, KC_P9,   KC_P6,   KC_P3,   KC_PDOT, KC_TRNS},
+	{KC_PMNS, KC_PPLS, KC_PPLS, KC_PENT, KC_PENT, KC_TRNS},
+	{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,   KC_NO  }
+  },
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/phantom/keymaps/xyverz/keymap.c b/keyboards/phantom/keymaps/xyverz/keymap.c
new file mode 100644
index 000000000..aa6af18b1
--- /dev/null
+++ b/keyboards/phantom/keymaps/xyverz/keymap.c
@@ -0,0 +1,104 @@
+#include "phantom.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _FL 3
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QW] = { /* Layer 0: Qwerty */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_DV] = { /* Layer 1: Dvorak */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_CM] = { /* Layer 2: Colemak */
+    {KC_ESC,  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS},
+    {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP},
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,  KC_END,  KC_PGDN},
+    {KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, XXXXXXX, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX},
+    {KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, KC_UP,   XXXXXXX},
+    {KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT}
+  },
+
+[_FL] = { /* Layer 3: Functions */
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, RESET,   KC_MPRV, KC_MPLY, KC_MNXT},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX},
+    {_______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX},
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______},
+  },
+
+
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/preonic/keymaps/jacwib/Makefile b/keyboards/preonic/keymaps/jacwib/Makefile
new file mode 100644
index 000000000..3e87d41d3
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/Makefile
@@ -0,0 +1,20 @@
+
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/preonic/keymaps/jacwib/config.h b/keyboards/preonic/keymaps/jacwib/config.h
new file mode 100644
index 000000000..23e9e0ed2
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define FORCE_NKRO 1
+
+#endif
diff --git a/keyboards/preonic/keymaps/jacwib/keymap.c b/keyboards/preonic/keymaps/jacwib/keymap.c
new file mode 100644
index 000000000..cf441bf30
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/keymap.c
@@ -0,0 +1,215 @@
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "keymap_nordic.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   +  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  Å   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   Ö  |  Ä   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   <  |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   .  |   ,  |  -   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  |AltGr |Lower | Space| Enter|Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_BSPC},
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_AM  },
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH},
+  {KC_LSFT, NO_LESS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_DOT,  KC_COMM, NO_MINS},
+  {KC_LCTL, KC_LGUI, KC_LALT, NO_ALGR, LOWER,   KC_SPC,  KC_ENT,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   @  |   £  |   $  |      |      |   {  |   [  |   ]  |   }  |   \  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |VolUp |      |      |  ~   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |LastS |PauseP|NextS |      |  *   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   |  |      |      |      |      |      |      |VolDwn|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |Bspc  |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {_______, NO_AT,   NO_PND,  NO_DLR,  _______, _______, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_BSLS, KC_DEL},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, NO_TILD},
+  {_______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, LSFT(KC_BSLS)},
+  {_______, NO_PIPE, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   !  |   "  |   #  |   ¤  |   %  |   &  |   /  |   (  |   )  |   =  |   ?  | Ins  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Mouse^|      |      |      |      |ScrlUp|      |      |  ^   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |Mouse<|MouseV|Mouse>|      |      |MLC   |MMC   |MRC   |   '  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   >  |      |      |      |      |      |      |ScrlDown| :  |  ;   |  _   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |Bspc  |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {LSFT(KC_1),NO_QUO2,LSFT(KC_3), NO_BULT,LSFT(KC_5), NO_AMPR, NO_SLSH, NO_LPRN, NO_RPRN, NO_EQL,  NO_QUES, KC_INS},
+  {_______, _______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, NO_CIRC},
+  {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN3, KC_BTN2, NO_APOS, NO_QUOT},
+  {_______, NO_GRTR, _______, _______, _______, _______, _______, _______, KC_WH_D, NO_COLN, NO_SCLN, NO_UNDS},
+  {_______, _______, _______, _______, _______, KC_BSPC, _______, _______, _______, _______, _______, _______}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      | Reset|      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |Rsft  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |MusOn |MusOff|      |      |      |      |      |      |      |      | Reset|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12},
+  {_______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT},
+  {_______, MU_ON,   MU_OFF,  _______, _______, _______, _______, _______, _______, _______, _______, RESET  },
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = {
+  {NOTE_B5, 20},
+  {NOTE_B6, 8},
+  {NOTE_DS6, 20},
+  {NOTE_B6, 8}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case BACKLIT:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+          return false;
+          break;
+      }
+    return true;
+};
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/preonic/keymaps/jacwib/readme.md b/keyboards/preonic/keymaps/jacwib/readme.md
new file mode 100644
index 000000000..066031235
--- /dev/null
+++ b/keyboards/preonic/keymaps/jacwib/readme.md
@@ -0,0 +1,3 @@
+# Jacwib's preonic keymap.
+
+Designed for use with a swedish language.
diff --git a/keyboards/tv44/Makefile b/keyboards/tv44/Makefile
new file mode 100644
index 000000000..45ca12780
--- /dev/null
+++ b/keyboards/tv44/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/tv44/config.h b/keyboards/tv44/config.h
new file mode 100644
index 000000000..0ae93c095
--- /dev/null
+++ b/keyboards/tv44/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEAE
+#define PRODUCT_ID      0x8844
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Evan Sailer
+#define PRODUCT         TheVan 44
+#define DESCRIPTION     keyboard firmware for TV44
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
+#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/tv44/keymaps/default/Makefile b/keyboards/tv44/keymaps/default/Makefile
new file mode 100644
index 000000000..f4671a9d1
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/default/config.h b/keyboards/tv44/keymaps/default/config.h
new file mode 100644
index 000000000..df06a2620
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/default/keymap.c b/keyboards/tv44/keymaps/default/keymap.c
new file mode 100644
index 000000000..6a4fef3da
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/keymap.c
@@ -0,0 +1,97 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QW 0
+#define _DV 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+#define _L3 5
+
+// Macro name shortcuts
+#define QWERTY M(_QW)
+#define DVORAK M(_DV)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_DV] = { /* Dvorak */
+    {KC_TAB,  KC_COMM, KC_DOT,  KC_SLSH, KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_Q,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1) },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_CM] = { /* Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {_______, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L2] = { /* LAYER 2 */
+    {_______, QWERTY,  DVORAK,  COLEMAK, _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______ },
+    {KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______ },
+    {_______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, XXXXXXX, _______ }
+  },
+  [_L3] = { /* LAYER 3 */
+    {_______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______ },
+    {KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______ },
+    {KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______ },
+    {_______, KC_LSFT, KC_B,    KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_C,    _______, _______, XXXXXXX, _______ }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/tv44/keymaps/default/readme.md b/keyboards/tv44/keymaps/default/readme.md
new file mode 100644
index 000000000..ac84c08cf
--- /dev/null
+++ b/keyboards/tv44/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for tv44
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/xyverz/Makefile b/keyboards/tv44/keymaps/xyverz/Makefile
new file mode 100644
index 000000000..f4671a9d1
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/xyverz/config.h b/keyboards/tv44/keymaps/xyverz/config.h
new file mode 100644
index 000000000..df06a2620
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/tv44/keymaps/xyverz/keymap.c b/keyboards/tv44/keymaps/xyverz/keymap.c
new file mode 100644
index 000000000..8cbcf8d35
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/keymap.c
@@ -0,0 +1,92 @@
+#include "tv44.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _DV 0
+#define _QW 1
+#define _CM 2
+#define _L1 3
+#define _L2 4
+
+// Macro name shortcuts
+#define DVORAK M(_DV)
+#define QWERTY M(_QW)
+#define COLEMAK M(_CM)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DV] = { /* 0: Dvorak */
+    {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT  },
+    {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_QW] = { /* 1: Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+    {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_CM] = { /* 2: Colemak */
+    {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+    {MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT  },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
+    {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) }
+  },
+
+  [_L1] = {/* 1: FN 1 */
+    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL  },
+    {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______ },
+    {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT },
+    {KC_ESC,  KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ }
+  },
+
+  [_L2] = { /* 2: FN 2 */
+    {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_ESC  },
+    {_______, KC_F11,  KC_F12,  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT  },
+    {_______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_VOLD, _______ },
+    {QWERTY,  DVORAK,  COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ }
+  }
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+        case _DV:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_DV);
+          }
+          break;
+        case _QW:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_QW);
+          }
+          break;
+        case _CM:
+          if (record->event.pressed) {
+            persistant_default_layer_set(1UL<<_CM);
+          }
+          break;
+      }
+    return MACRO_NONE;
+};
+
+
diff --git a/keyboards/tv44/keymaps/xyverz/readme.md b/keyboards/tv44/keymaps/xyverz/readme.md
new file mode 100644
index 000000000..ac84c08cf
--- /dev/null
+++ b/keyboards/tv44/keymaps/xyverz/readme.md
@@ -0,0 +1 @@
+# The default keymap for tv44
\ No newline at end of file
diff --git a/keyboards/tv44/readme.md b/keyboards/tv44/readme.md
new file mode 100644
index 000000000..e3b557fe2
--- /dev/null
+++ b/keyboards/tv44/readme.md
@@ -0,0 +1,28 @@
+tv44 keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/tv44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/tv44/tv44.c b/keyboards/tv44/tv44.c
new file mode 100644
index 000000000..6dc0efd28
--- /dev/null
+++ b/keyboards/tv44/tv44.c
@@ -0,0 +1,28 @@
+#include "tv44.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/tv44/tv44.h b/keyboards/tv44/tv44.h
new file mode 100644
index 000000000..4c30174ac
--- /dev/null
+++ b/keyboards/tv44/tv44.h
@@ -0,0 +1,22 @@
+#ifndef TV44_H
+#define TV44_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,           K37, K38,      K39,      K3B  \
+) \
+{ \
+    { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
+    { K10,   K11,   K12,   K13,  K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B }, \
+    { K20,   K21,   K22,   K23,  K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B }, \
+    { K30,   K31,   K32,   K33,  KC_NO, KC_NO, KC_NO, K37,   K38,   K39,   K3A,   K3B }  \
+
+#endif
diff --git a/quantum/process_keycode/process_unicode.c b/quantum/process_keycode/process_unicode.c
index ad5d7f86b..3fcac15ce 100644
--- a/quantum/process_keycode/process_unicode.c
+++ b/quantum/process_keycode/process_unicode.c
@@ -13,7 +13,7 @@ uint16_t hex_to_keycode(uint8_t hex)
   }
 }
 
-void set_unicode_mode(uint8_t os_target)
+void set_unicode_input_mode(uint8_t os_target)
 {
   input_mode = os_target;
 }