[Keyboard] Add Quasar SSK Controller (#6201)

* Begin work

* Finalize files

* Fix readme

* Update readme.md

* Add configurator support

* Update keyboards/ai03/quasar/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Remove tailing backslashes in keymaps

10 files changed, 668 insertions, 0 deletions

diff --git a/keyboards/ai03/quasar/config.h b/keyboards/ai03/quasar/config.h
new file mode 100644
index 000000000..7c02f91d0
--- /dev/null
+++ b/keyboards/ai03/quasar/config.h
@@ -0,0 +1,251 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0010
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ryota Goto
+#define PRODUCT         Quasar
+#define DESCRIPTION     SSK Controller
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ai03/quasar/info.json b/keyboards/ai03/quasar/info.json
new file mode 100644
index 000000000..20637af55
--- /dev/null
+++ b/keyboards/ai03/quasar/info.json
@@ -0,0 +1,97 @@
+{
+    "keyboard_name": "quasar", 
+    "url": "https://github.com/ai03-2725/Quasar/", 
+    "maintainer": "ai03", 
+    "width": 18.5, 
+    "height": 6.75, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+				{"label":"Esc", "x":0, "y":0},
+				{"label":"F1", "x":2, "y":0},
+				{"label":"F2", "x":3, "y":0},
+				{"label":"F3", "x":4, "y":0},
+				{"label":"F4", "x":5, "y":0},
+				{"label":"F5", "x":6.5, "y":0},
+				{"label":"F6", "x":7.5, "y":0},
+				{"label":"F7", "x":8.5, "y":0},
+				{"label":"F8", "x":9.5, "y":0},
+				{"label":"F9", "x":11, "y":0},
+				{"label":"F10", "x":12, "y":0},
+				{"label":"F11", "x":13, "y":0},
+				{"label":"F12", "x":14, "y":0},
+				{"label":"PrtSc", "x":15.5, "y":0},
+				{"label":"Scroll Lock", "x":16.5, "y":0},
+				{"label":"Pause", "x":17.5, "y":0},
+				{"label":"~", "x":0, "y":1.75},
+				{"label":"!", "x":1, "y":1.75},
+				{"label":"@", "x":2, "y":1.75},
+				{"label":"#", "x":3, "y":1.75},
+				{"label":"$", "x":4, "y":1.75},
+				{"label":"%", "x":5, "y":1.75},
+				{"label":"^", "x":6, "y":1.75},
+				{"label":"&", "x":7, "y":1.75},
+				{"label":"*", "x":8, "y":1.75},
+				{"label":"(", "x":9, "y":1.75},
+				{"label":")", "x":10, "y":1.75},
+				{"label":"_", "x":11, "y":1.75},
+				{"label":"+", "x":12, "y":1.75},
+				{"label":"Backspace", "x":13, "y":1.75, "w":2},
+				{"label":"Insert", "x":15.5, "y":1.75},
+				{"label":"Home", "x":16.5, "y":1.75},
+				{"label":"PgUp", "x":17.5, "y":1.75},
+				{"label":"Tab", "x":0, "y":2.75, "w":1.5},
+				{"label":"Q", "x":1.5, "y":2.75},
+				{"label":"W", "x":2.5, "y":2.75},
+				{"label":"E", "x":3.5, "y":2.75},
+				{"label":"R", "x":4.5, "y":2.75},
+				{"label":"T", "x":5.5, "y":2.75},
+				{"label":"Y", "x":6.5, "y":2.75},
+				{"label":"U", "x":7.5, "y":2.75},
+				{"label":"I", "x":8.5, "y":2.75},
+				{"label":"O", "x":9.5, "y":2.75},
+				{"label":"P", "x":10.5, "y":2.75},
+				{"label":"{", "x":11.5, "y":2.75},
+				{"label":"}", "x":12.5, "y":2.75},
+				{"label":"|", "x":13.5, "y":2.75, "w":1.5},
+				{"label":"Delete", "x":15.5, "y":2.75},
+				{"label":"End", "x":16.5, "y":2.75},
+				{"label":"PgDn", "x":17.5, "y":2.75},
+				{"label":"Caps Lock", "x":0, "y":3.75, "w":1.25},
+				{"label":"A", "x":1.75, "y":3.75},
+				{"label":"S", "x":2.75, "y":3.75},
+				{"label":"D", "x":3.75, "y":3.75},
+				{"label":"F", "x":4.75, "y":3.75},
+				{"label":"G", "x":5.75, "y":3.75},
+				{"label":"H", "x":6.75, "y":3.75},
+				{"label":"J", "x":7.75, "y":3.75},
+				{"label":"K", "x":8.75, "y":3.75},
+				{"label":"L", "x":9.75, "y":3.75},
+				{"label":":", "x":10.75, "y":3.75},
+				{"label":"\"", "x":11.75, "y":3.75},
+				{"label":"Enter", "x":12.75, "y":3.75, "w":2.25},
+				{"label":"Shift", "x":0, "y":4.75, "w":2.25},
+				{"label":"Z", "x":2.25, "y":4.75},
+				{"label":"X", "x":3.25, "y":4.75},
+				{"label":"C", "x":4.25, "y":4.75},
+				{"label":"V", "x":5.25, "y":4.75},
+				{"label":"B", "x":6.25, "y":4.75},
+				{"label":"N", "x":7.25, "y":4.75},
+				{"label":"M", "x":8.25, "y":4.75},
+				{"label":"<", "x":9.25, "y":4.75},
+				{"label":">", "x":10.25, "y":4.75},
+				{"label":"?", "x":11.25, "y":4.75},
+				{"label":"Shift", "x":12.25, "y":4.75, "w":2.75},
+				{"label":"\u2191", "x":16.5, "y":4.75},
+				{"label":"Ctrl", "x":0, "y":5.75, "w":1.5},
+				{"label":"Alt", "x":2.5, "y":5.75, "w":1.5},
+				{"x":4, "y":5.75, "w":7},
+				{"label":"Alt", "x":11, "y":5.75, "w":1.5},
+				{"label":"Ctrl", "x":13.5, "y":5.75, "w":1.5},
+				{"label":"\u2190", "x":15.5, "y":5.75},
+				{"label":"\u2193", "x":16.5, "y":5.75},
+				{"label":"\u2192", "x":17.5, "y":5.75}
+			]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/ai03/quasar/keymaps/ai03/keymap.c b/keyboards/ai03/quasar/keymaps/ai03/keymap.c
new file mode 100644
index 000000000..e2dca55cd
--- /dev/null
+++ b/keyboards/ai03/quasar/keymaps/ai03/keymap.c
@@ -0,0 +1,61 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+/*
+ *  K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
+ *  K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
+ *  K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
+ *  K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
+ *  K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
+ *  K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_SLCK, KC_PAUS, 
+	KC_LGUI, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP, 
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,    KC_DEL,  KC_END,  KC_PGDN, 
+	MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,                                
+	KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,             KC_UP,            
+	KC_LCTL,          KC_LALT,                                     KC_SPC,                                      KC_GRV,           KC_DEL,     KC_LEFT, KC_DOWN, KC_RGHT  
+  ),
+  [1] = LAYOUT( /* FN */
+    RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,    _______, _______, _______, 
+	_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,     _______, _______, _______, 
+	KC_CAPS, _______, KC_UP,   _______, _______, _______, _______, _______, KC_PGUP, _______, KC_MPRV, KC_MPLY, KC_MNXT,          _______,    _______, _______, _______, 
+	_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLU, KC_VOLD, KC_HOME, KC_PGDN, KC_END,  _______, _______,                   _______,                               
+	_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   KC_PSCR,             KC_PGUP,          
+	_______,          _______,                                     _______,                                     _______,          KC_BSPC,    KC_HOME, KC_PGDN, KC_END   
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/ai03/quasar/keymaps/ai03/readme.md b/keyboards/ai03/quasar/keymaps/ai03/readme.md
new file mode 100644
index 000000000..6f6a0b4fe
--- /dev/null
+++ b/keyboards/ai03/quasar/keymaps/ai03/readme.md
@@ -0,0 +1,3 @@
+# The ai03 keymap for Quasar
+
+Focuses functionality mainly into the 60% cluster.
\ No newline at end of file
diff --git a/keyboards/ai03/quasar/keymaps/default/keymap.c b/keyboards/ai03/quasar/keymaps/default/keymap.c
new file mode 100644
index 000000000..6de45951a
--- /dev/null
+++ b/keyboards/ai03/quasar/keymaps/default/keymap.c
@@ -0,0 +1,61 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+/*
+ *  K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
+ *  K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
+ *  K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
+ *  K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
+ *  K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
+ *  K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_SLCK, KC_PAUS, 
+	KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP, 
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,    KC_DEL,  KC_END,  KC_PGDN, 
+	MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,                                
+	KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,             KC_UP,            
+	KC_LCTL,          KC_LALT,                                     KC_SPC,                                      KC_RALT,          KC_RCTL,    KC_LEFT, KC_DOWN, KC_RGHT  
+  ),
+  [1] = LAYOUT( /* FN */
+    RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,    _______, _______, _______, 
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, 
+	KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, 
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,                               
+	_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,             _______,          
+	_______,          _______,                                     _______,                                     _______,          _______,    _______, _______, _______  
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/ai03/quasar/keymaps/default/readme.md b/keyboards/ai03/quasar/keymaps/default/readme.md
new file mode 100644
index 000000000..bcfeda1ad
--- /dev/null
+++ b/keyboards/ai03/quasar/keymaps/default/readme.md
@@ -0,0 +1,4 @@
+# The default keymap for Quasar
+
+Caps lock behaves as Fn/Layer. Press caps+esc for reset, caps+tab for caps lock.  
+The rest is basic WKL TKL.
\ No newline at end of file
diff --git a/keyboards/ai03/quasar/quasar.c b/keyboards/ai03/quasar/quasar.c
new file mode 100644
index 000000000..ac8b75177
--- /dev/null
+++ b/keyboards/ai03/quasar/quasar.c
@@ -0,0 +1,51 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quasar.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/
diff --git a/keyboards/ai03/quasar/quasar.h b/keyboards/ai03/quasar/quasar.h
new file mode 100644
index 000000000..4125f81b5
--- /dev/null
+++ b/keyboards/ai03/quasar/quasar.h
@@ -0,0 +1,45 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
+	K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
+	K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
+	K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
+	K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
+	K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
+) \
+{ \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K005,  K006,  K007,  KC_NO, KC_NO, K010,  K011,  K012,  KC_NO, K014,  K015  }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  KC_NO, KC_NO, KC_NO, KC_NO, K114,  KC_NO }, \
+	{ KC_NO, KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ KC_NO, KC_NO, K302,  K303,  K304,  K305,  KC_NO, K307,  K308,  K309,  K310,  KC_NO, KC_NO, KC_NO, KC_NO, K315  }, \
+	{ KC_NO, KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  K414,  K415  }, \
+	{ K500,  KC_NO, K502,  K503,  K504,  K505,  K506,  K507,  K508,  K509,  K510,  K511,  K512,  K513,  K514,  KC_NO }, \
+	{ KC_NO, K601,  K602,  K603,  K604,  K605,  K606,  K607,  K608,  K609,  K610,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ KC_NO, KC_NO, K702,  KC_NO, K704,  K705,  K706,  K707,  K708,  KC_NO, K710,  KC_NO, KC_NO, KC_NO, K714,  K715  }  \
+}
diff --git a/keyboards/ai03/quasar/readme.md b/keyboards/ai03/quasar/readme.md
new file mode 100644
index 000000000..e0ea30ac9
--- /dev/null
+++ b/keyboards/ai03/quasar/readme.md
@@ -0,0 +1,15 @@
+# Quasar
+
+![Quasar](https://i.imgur.com/XIbX2Pw.jpg)
+
+Replacement controller for the IBM Model M Space Saving keyboard
+
+Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
+Hardware Supported: The Quasar PCB  
+Hardware Availability: [Source available on GitHub](https://github.com/ai03-2725/Quasar/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/quasar:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk
new file mode 100644
index 000000000..afbd1de14
--- /dev/null
+++ b/keyboards/ai03/quasar/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)