Squashed 'lib/lufa/' content from commit 385d40300

git-subtree-dir: lib/lufa
git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b

1 files changed, 226 insertions, 0 deletions

diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
new file mode 100644
index 000000000..44e8f1274
--- /dev/null
+++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
@@ -0,0 +1,226 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the PrinterHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "PrinterHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		PrinterHost_Task();
+
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#endif
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	puts_P(PSTR("Getting Config Data.\r\n"));
+
+	uint8_t ErrorCode;
+
+	/* Get and process the configuration descriptor data */
+	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+	{
+		if (ErrorCode == ControlError)
+		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+		else
+		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+		printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
+
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		return;
+	}
+
+	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+	{
+		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		return;
+	}
+
+	/* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface
+	 * request to switch to the interface alternate setting with the Bidirectional protocol */
+	if (PrinterAltSetting)
+	{
+		if ((ErrorCode = USB_Host_SetInterfaceAltSetting(PrinterInterfaceNumber, PrinterAltSetting)) != HOST_SENDCONTROL_Successful)
+		{
+			printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n"
+			                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+			LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+			USB_Host_SetDeviceConfiguration(0);
+			return;
+		}
+	}
+
+	puts_P(PSTR("Retrieving Device ID...\r\n"));
+
+	char DeviceIDString[300];
+	if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful)
+	{
+		printf_P(PSTR(ESC_FG_RED "Control Error (Get Device ID).\r\n"
+		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		USB_Host_SetDeviceConfiguration(0);
+		return;
+	}
+
+	printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString);
+
+	puts_P(PSTR("Printer Enumerated.\r\n"));
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+/** Task to manage an enumerated USB printer once connected, to display device
+ *  information and print a test PCL page.
+ */
+void PrinterHost_Task(void)
+{
+	if (USB_HostState != HOST_STATE_Configured)
+	  return;
+
+	uint8_t ErrorCode;
+
+	/* Indicate device busy via the status LEDs */
+	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+	char  TestPageData[]    = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";
+	uint16_t TestPageLength = strlen(TestPageData);
+
+	printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);
+
+	/* Send the test page to the attached printer */
+	if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError)
+	{
+		printf_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n"
+		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+		USB_Host_SetDeviceConfiguration(0);
+		return;
+	}
+
+	puts_P(PSTR("Test Page Sent.\r\n"));
+
+	/* Indicate device no longer busy */
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	USB_Host_SetDeviceConfiguration(0);
+}
+