Made directories for keyboard and converter projects.

9 files changed, 889 insertions, 0 deletions

diff --git a/converter/terminal_usb/Makefile.102_pjrc b/converter/terminal_usb/Makefile.102_pjrc
new file mode 100644
index 000000000..e9d14e7a0
--- /dev/null
+++ b/converter/terminal_usb/Makefile.102_pjrc
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = terminal_usb_102_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap_102.c \
+	matrix.c \
+	led.c \
+	ps2.c
+
+CONFIG_H = config_102_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/terminal_usb/Makefile.122_pjrc b/converter/terminal_usb/Makefile.122_pjrc
new file mode 100644
index 000000000..bec00510e
--- /dev/null
+++ b/converter/terminal_usb/Makefile.122_pjrc
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = terminal_usb_122_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap_122.c \
+	matrix.c \
+	led.c \
+	ps2.c
+
+CONFIG_H = config_122_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+#MOUSEKEY_ENABLE = yes	# Mouse keys
+#EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/terminal_usb/README b/converter/terminal_usb/README
new file mode 100644
index 000000000..1ce49f33d
--- /dev/null
+++ b/converter/terminal_usb/README
@@ -0,0 +1,47 @@
+PS/2 to USB  keyboard converter for IBM terminal keyboard
+=========================================================
+It supports PS/2 Scan Code Set 3 and runs on Teensy, Teensy++ and boards withATMega32u4/AT90USB.
+I tested the converter only on Teensy with 1392595(102keys terminal keyboard),
+though, I think it will also work with 122keys boards.
+
+http://geekhack.org/showwiki.php?title=Island:27272
+
+
+CONNECTION
+----------
+Data: PD0
+Clock: PD1
+VCC and GND, of course.
+
+It is the same as Soarer's converter pin configuration.
+See RESOURCE for keyboard connector pin assign.
+
+
+
+BUILD
+-----
+Get source:
+$ git clone https://github.com/tmk/tmk_keyboard.git
+$ cd terminal_usb
+
+For 102keys:
+$ make -f Makefile.102_pjrc
+
+For 122keys(not tested):
+$ make -f Makefile.122_pjrc
+
+I used WinAVR 20100110 to develop and build.
+
+
+
+RESOURCE
+--------
+Soarer's Converter: http://geekhack.org/showwiki.php?title=Island:17458
+102keys(1392595): http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
+KbdBabel: http://www.kbdbabel.org/
+RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
+DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
+WinAVR: http://winavr.sourceforge.net/
+
+EOF
diff --git a/converter/terminal_usb/config_102_pjrc.h b/converter/terminal_usb/config_102_pjrc.h
new file mode 100644
index 000000000..2dce04af7
--- /dev/null
+++ b/converter/terminal_usb/config_102_pjrc.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6531
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2(Set3)-USB Keyboard converter(IBM 102keys)
+#define DESCRIPTION     USB converter for IBM Terminal Keyboard 102keys
+
+
+/* matrix size */
+#define MATRIX_ROWS 17  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL))  \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+
+#endif
diff --git a/converter/terminal_usb/config_122_pjrc.h b/converter/terminal_usb/config_122_pjrc.h
new file mode 100644
index 000000000..43691bd71
--- /dev/null
+++ b/converter/terminal_usb/config_122_pjrc.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6532
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2(Set3)-USB Keyboard converter(IBM 122keys)
+#define DESCRIPTION     USB converter for IBM Terminal Keyboard 122keys
+
+
+/* matrix size */
+#define MATRIX_ROWS 17  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL))  \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+
+#endif
diff --git a/converter/terminal_usb/keymap_102.c b/converter/terminal_usb/keymap_102.c
new file mode 100644
index 000000000..430570c47
--- /dev/null
+++ b/converter/terminal_usb/keymap_102.c
@@ -0,0 +1,208 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/* 
+ * IBM Terminal keyboard 1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ *     8 bytes
+ *   +---------+
+ *  0|         |
+ *  :|         | 0x00-0x87
+ *  ;|         |
+ * 17|         |
+ *   +---------+
+ */
+#define KEYMAP( \
+    K08,    K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,      K57,K5F,K62,                   \
+                                                                                                 \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66,  K67,K6E,K6F,  K76,K77,K7E,K84, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,    K5C,  K64,K65,K6D,  K6C,K75,K7D,K7C, \
+    K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K53,K5A,                K6B,K73,K74,K7B, \
+    K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K51,K59,      K63,      K69,K72,K7A,K79, \
+    K11,    K19,            K29,                    K39,    K58,  K61,K60,K6A,  K68,K70,K71,K78  \
+) { \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K07 }, \
+    { KB_##K08, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_NO,    KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_NO,    KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_NO,    KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_NO,    KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_NO,    KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_NO,    KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+    { KB_NO,    KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_NO,    KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+    { KB_NO,    KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+    { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K84, KB_NO,    KB_NO,    KB_NO,   }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    1,              // Fn0
+    2,              // Fn1
+    3,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_SCLN,        // Fn0
+    KB_SLSH,        // Fn1
+    KB_ESC,         // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+     * `---'   `---------------' `---------------' `---------------' `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|BS | |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Retu|               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl|    |Alt |          Space              |Alt |    |Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `----'    `---------------------------------------'    `----' `-----------' `---------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,             PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,  INS, HOME,PGUP,  NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  DEL, END, PGDN,  P7,  P8,  P9,  PPLS,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN0, QUOT,     NUHS,ENT,                    P4,  P5,  P6,  PCMM,
+    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1,      RO,  FN2,        UP,         P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               SPC,                          RALT,     RCTL,  LEFT,DOWN,RGHT,  NO,  P0,  PDOT,NO
+    ),
+
+    /* 1: Mouse keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |McL|McD|McR|   |McL|McD|McU|McR|Fn0|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |    |Alt |         Mb1                |Alt |    |Ctrl|
+     * `-----'    `--------------------------------------'    `----'
+     * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
+     * Vo = Volume, Mut = Mute
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, NO,  BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,       BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
+    LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN0, NO,       NO,  ENT,                         P4,  P5,  P6,  PCMM,
+    LSFT,NO,  VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE,     NO,  RSFT,          UP,           P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               BTN1,                         RALT,     RCTL,     LEFT,DOWN,RGHT,    NO,  P0,  PDOT,NO
+    ),
+
+    /* 2: Cursor keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |Lef|Dow|Rig|   |Lef|Dow| Up|Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|Fn1|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |    |Alt |         Space              |Alt |    |Ctrl|
+     * `-----'    `--------------------------------------'    `----'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, NO,  BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,  NO,  NO,       BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PMNS,
+    LCTL,NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       NO,  ENT,                         P4,  P5,  P6,  PCMM,
+    LSFT,NO,  VOLD,VOLU,MUTE,NO,  NO,  HOME,PGDN,PGUP,END, FN1,      NO,  RSFT,          UP,           P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               SPC,                          RALT,     RCTL,     LEFT,DOWN,RGHT,    NO,  P0,  PDOT,NO
+    ),
+
+    /* 3: HHKB
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Fn2       |
+     * |-----------------------------------------------------------|
+     * |Ctrl |    |Alt |         Space              |Alt |    |Ctrl|
+     * `-----'    `--------------------------------------'    `----'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, NO,  BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  NO,       BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,     NO,  ENT,                         P4,  P5,  P6,  PCMM,
+    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,     NO,  FN2,           UP,           P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               SPC,                          RALT,     RCTL,     LEFT,DOWN,RGHT,    NO,  P0,  PDOT,NO
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/terminal_usb/keymap_122.c b/converter/terminal_usb/keymap_122.c
new file mode 100644
index 000000000..7a2168122
--- /dev/null
+++ b/converter/terminal_usb/keymap_122.c
@@ -0,0 +1,143 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/* 
+ * IBM Terminal keyboard 1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ *     8 bytes
+ *   +---------+
+ *  0|         |
+ *  :|         | 0x00-0x87
+ *  ;|         |
+ * 17|         |
+ *   +---------+
+ */
+#define KEYMAP( \
+                  K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F,                                         \
+                  K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,                                         \
+                                                                                                           \
+    K05,K06,  K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66,  K67,K6E,K6F,  K76,K77,K7E,K84, \
+    K04,K0C,  K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,    K5C,  K64,K65,K6D,  K6C,K75,K7D,K7C, \
+    K03,K0B,  K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K53,K5A,      K63,      K6B,K73,K74,K7B, \
+    K83,K0A,  K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K51,K59,  K61,K62,K6A,  K69,K72,K7A,K79, \
+    K01,K09,  K11,    K19,            K29,                    K39,    K58,      K60,      K68,K70,K71,K78  \
+) { \
+    { KB_NO,    KB_##K01, KB_NO,    KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+    { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K83, KB_##K84, KB_NO,    KB_NO,    KB_NO,   }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+     * `---'   `---------------' `---------------' `---------------' `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|BS | |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Retu|               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl|    |Alt |          Space              |Alt |    |Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `----'    `---------------------------------------'    `----' `-----------' `---------------'
+     */
+    KEYMAP(
+                     F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
+                     F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,
+
+    PSCR,ESC,   GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,  INS, HOME,PGUP,  NLCK,PSLS,PAST,PMNS,
+    SLCK,INT4,  TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  DEL, END, PGDN,  P7,  P8,  P9,  PPLS,
+    PAUS,INT5,  CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,        UP,         P4,  P5,  P6,  PCMM,
+    APP, INT6,  LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,  LEFT,INT2,RGHT,  P1,  P2,  P3,  PENT,
+    RGUI,LGUI,  LCTL,     LALT,               SPC,                          RALT,     RCTL,       DOWN,       NO,  P0,  PDOT,NO
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/terminal_usb/led.c b/converter/terminal_usb/led.c
new file mode 100644
index 000000000..e448e84ec
--- /dev/null
+++ b/converter/terminal_usb/led.c
@@ -0,0 +1,33 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    uint8_t ps2_led = 0;
+    if (usb_led &  (1<<USB_LED_SCROLL_LOCK))
+        ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+    if (usb_led &  (1<<USB_LED_NUM_LOCK))
+        ps2_led |= (1<<PS2_LED_NUM_LOCK);
+    if (usb_led &  (1<<USB_LED_CAPS_LOCK))
+        ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+    ps2_host_set_led(ps2_led);
+}
diff --git a/converter/terminal_usb/matrix.c b/converter/terminal_usb/matrix.c
new file mode 100644
index 000000000..a6eff8c1e
--- /dev/null
+++ b/converter/terminal_usb/matrix.c
@@ -0,0 +1,226 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|         |
+ *  :|         | 0x00-0x87
+ *  ;|         |
+ * 17|         |
+ *   +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      (code>>3)
+#define COL(code)      (code&0x07)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    print_enable = true;
+    debug_enable = true;
+    //debug_matrix = true;
+    //debug_keyboard = true;
+    //debug_mouse = false;
+
+    ps2_host_init();
+    // Make and Break code without Typematic
+    while (ps2_host_send(0xF8) != 0xFA) {
+        debug("send F8: failed\n");
+        _delay_ms(500);
+    }
+    debug("send F8: OK\n");
+
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+
+    // scan code reading states
+    static enum {
+        INIT,
+        F0,
+    } state = INIT;
+
+
+    is_modified = false;
+
+    uint8_t code;
+    while ((code = ps2_host_recv())) {
+        debug_hex(code);
+        switch (state) {
+            case INIT:
+                switch (code) {
+                    case 0xF0:
+                        state = F0;
+                        debug(" ");
+                        break;
+                    default:    // normal key make
+                        if (code < 0x88) {
+                            matrix_make(code);
+                        } else {
+                            debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
+                        }
+                        state = INIT;
+                        debug("\n");
+                }
+                break;
+            case F0:    // Break code
+                switch (code) {
+                    default:
+                    if (code < 0x88) {
+                        matrix_break(code);
+                    } else {
+                        debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+                    }
+                    state = INIT;
+                    debug("\n");
+                }
+                break;
+        }
+    }
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+
+inline
+static void matrix_make(uint8_t code)
+{
+    if (!matrix_is_on(ROW(code), COL(code))) {
+        matrix[ROW(code)] |= 1<<COL(code);
+        is_modified = true;
+    }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+    if (matrix_is_on(ROW(code), COL(code))) {
+        matrix[ROW(code)] &= ~(1<<COL(code));
+        is_modified = true;
+    }
+}