aboutsummaryrefslogtreecommitdiffstats
path: root/docs/faq_build.md
diff options
context:
space:
mode:
authorGravatar fauxpark <fauxpark@gmail.com>2017-12-09 16:56:58 +1100
committerGravatar Jack Humbert <jack.humb@gmail.com>2017-12-09 10:46:11 -0500
commitbb53635f33c213e5a940edea8b07026ef89aed42 (patch)
tree7e170b424e37b7305f8be3072cd8c970f77ca073 /docs/faq_build.md
parentaf37bb2f78c39c224c995eb57c757c63034a3d9c (diff)
downloadqmk_firmware-bb53635f33c213e5a940edea8b07026ef89aed42.tar.gz
Trim trailing whitespace
Diffstat (limited to 'docs/faq_build.md')
-rw-r--r--docs/faq_build.md12
1 files changed, 6 insertions, 6 deletions
diff --git a/docs/faq_build.md b/docs/faq_build.md
index 0474e2746..d38ca69d0 100644
--- a/docs/faq_build.md
+++ b/docs/faq_build.md
@@ -6,7 +6,7 @@ This page covers questions about building QMK. If you have not yet you should re
You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
In short when your controller is ATMega32u4,
-
+
$ sudo dfu-programmer atmega32u4 erase --force
$ sudo dfu-programmer atmega32u4 flash your.hex
$ sudo dfu-programmer atmega32u4 reset
@@ -81,11 +81,11 @@ make: *** [obj_alps64/protocol/lufa/lufa.o] Error 1
Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
```
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 2048
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 2048
# Atmel DFU loader 4096 (TMK Alt Controller)
-# LUFA bootloader 4096
-# USBaspLoader 2048
+# LUFA bootloader 4096
+# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=2048
```