diff options
author | Erez Zukerman <ezuk@madmimi.com> | 2016-05-24 23:55:29 -0400 |
---|---|---|
committer | Erez Zukerman <ezuk@madmimi.com> | 2016-05-24 23:55:29 -0400 |
commit | d06e940a179b2e81563cf6123461cfcad35f9045 (patch) | |
tree | 58f4bbc22f51cba0c22a6a1ab09a499681f1f89e /keyboard/hhkb/doc/HHKB.txt | |
parent | 8bc69afc633d3e199e3ac0a5bf39e4d255f2ce4a (diff) | |
download | qmk_firmware-d06e940a179b2e81563cf6123461cfcad35f9045.tar.gz |
[Erez & Jack] Removes keyboards which are not active on qmk
Diffstat (limited to 'keyboard/hhkb/doc/HHKB.txt')
-rw-r--r-- | keyboard/hhkb/doc/HHKB.txt | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt deleted file mode 100644 index 3d08ceb0a..000000000 --- a/keyboard/hhkb/doc/HHKB.txt +++ /dev/null @@ -1,204 +0,0 @@ -Internal of HHKB pro -===================== -HHKB pro has MCU and some chips on separate two PCBs. - -Controller PCB --------------- - M38K07M4 Renesas MCU with USB function - http://documentation.renesas.com/eng/products/mpumcu/rej03b0192_38k0ds.pdf - - (HHKB_controller.jpg) - -Keyswitch PCB -------------- - HC4051 Analog Multiplexer: select a row line. - http://www.ti.com/lit/ds/schs122j/schs122j.pdf - LS145 BCD Decoder: select a column line. - http://www.ti.com/lit/ds/symlink/sn74ls145.pdf - BU9831 Non-volatile electronic potentiometer: for calibration? - https://www.spezial.com/doc/rohm-a/bu9831.pdf - TP1683/4 Capacitive Sensing controller: no datasheet available. - - (HHKB_keyswitch.jpg) - - Topre original chip? - (HHKB_TP1684.jpg) - - -Connector Cable ---------------- -Two PCBs are connected by 15 lines(13 in case of Pro2). -Vcc and GND use 3(2) lines each, other lines are for keyboard signaling. - - HHKB connector lines: - JP Pro2 Pro Function Description TMK pin usage - -------------------------------------------------------------------------------------------- - 1 Vcc(5V) 5V - 1 1 2 Vcc(5V) 5V - 2 2 3 Vcc(5V) 5V - 3 3 4 TP1684 ~KEY: Low(0) when key is pressed PD7 input(with pullup) - 4 4 5 TP1684 HYS: High(1) when key is pressed PB7 output - 5 5 6 HC4051 A(bit0)\ PB0 output - 6 6 7 HC4051 B(bit1) > select row 0-7 PB1 output - 7 7 8 HC4051 C(bit2)/ PB2 output - 8 8 9 LS145 A(bit0)\ PB3 output - 9 9 10 LS145 B(bit1) > select column 0-7 PB4 output - 10 10 11 LS145 C(bit2)/ PB5 output - 11 11 12 LS145 ~D(enable) Low(0) enables selected column PB6 output - 12 12 13 GND GND - 13 13 14 GND GND - 15 GND - 14 HC4051(Z2) ~Enable of Z2 row0-7 PC6 - 15 HC4051(Z3) ~Enable of Z3 row8-15 PC7 - - NOTE: Probably HYS changes threshold for upstroke and makes hysteresis in the result. - NOTE: HYS should be given High(1) when previous KEY state is Low(0). - NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK. - NOTE: JP has two HC4051(Z2,Z3) and line 5, 6 and 7 are connected to both of them. - - (HHKB_connector.jpg) - - -Keyswitch matrix ----------------- -HHKB switch matrix is ghost-free and bounce-free. - - Pro/Pro2(8x8): - COL 0 1 2 3 4 5 6 7 - ROW --------------------------------------------------------------- - 0| 2 q w s a z x c - 1| 3 4 r e d f v b - 2| 5 6 y t g h n _NONE_ - 3| 1 Esc Tab Control LShift LAlt LMeta Space - 4| 7 8 u i k j m _NONE_ - 5| \ ` Delete Return Fn RShift RAlt RMeta - 6| 9 0 o p ; l , _NONE_ - 7| - + ] [ ' / . _NONE_ - - - JP(16x8): - COL 0 1 2 3 4 5 6 7 - ROW --------------------------------------------------------------- - 0| ESC TAB LFn LShift LCtrl - 1| 4 E MuHKN C D - 2| 3 W LAlt X S - 3| 1 HHK - 4| - 5| 5 R V F - 6| 2 Q LGui Z A - 7| 6 T Space B G - 8| 9 I Kana , K - 9| 8 U Henkan M J - A| 7 Y N H - B| 0 O RAlt . L - C| BS Right RShift Enter - D| \ [ Down Up ] - E| - P RFn / ; - F| ~ @ Left Ro : - - -Matrix diagram: - - Pro/Pro2: - +-------------------------+-+-+-+-+-+-+-+ Vcc - |bias control? - - - - - - - - --- - | 3.9K*8 R R R R R R R R | - +--------^+ +--------+ - - - - - - - - | - | 2| | HC4051 <0-------|-|-|-|-|-|-|-|--|R|-+ - | |capa. | <1-------|-|-|-|-|-|-|-|--|R|-+ - | TP1684 |sense | <2-------|-|-|-|-|-|-|-|--|R|-+ - | 11<------| <3-------|-|-|-|-|-|-|-|--|R|-+ - | | | <4-------|-|-|-|-|-|-|-|--|R|-+ - | | | <5-------|-|-|-|-|-|-|-|--|R|-+ - | <-+ | <6-------|-|-|-|-|-|-|-|--|R|-+ - | 1 4 | | | <7-------|-|-|-|-|-|-|-|--|R|-+ - +---V---^-+ | +-^-^-^--+ 0 1 2 3 4 5 6 7 33K*8 - KEY HYS | A B C +-----------------+ - | | +-^----+ | | | | LS145 | - Vcc | | |BU9831| | | | +-^--^--^--^------+ - --- | | +------+ | | | A B C D +-------+ - | | | | | | | | | | | | - 1-3 4 5 6 7 8 9 10 11 12 13-15 Pro | - 1-2 3 4 5 6 7 8 9 10 11 12-13 Pro2| - +--------------------------------------------------+ | - | connector | --- - +--------------------------------------------------+ GND - - - JP: - +-----------------------------+-+-+-+-+ Vcc - |bias control? - - - - - --- - | 3.9K*5 R R R R R | - +--------^+ +--------+ - - - - - | - | | | HC4051 <0-----------|-|-|-|-|----|R|-+ - | |capa. | Z2 <1-----------|-|-|-|-|----|R|-+ - | TP1684 |sense | <2-----------|-|-|-|-|----|R|-+ - | <---+--| <3-----------|-|-|-|-|----|R|-+ - | | | | <4-----------|-|-|-|-|----|R|-+ - | | ~En| <5-----------|-|-|-|-|----|R|-+ - | | +----> <6-----------|-|-|-|-|----|R|-+ - | | | | | A B C <7-----------|-|-|-|-|----|R|-+ - +---V---^-+ | | +-^-^-^--+ | | | | | | - KEY HYS | | | | | | | | | | | - | | | | +--------+ | | | | | | - | | | | | HC4051 <8-----------|-|-|-|-|----|R|-+ - | | | | | Z3 <9-----------|-|-|-|-|----|R|-+ - | | | +--| <A-----------|-|-|-|-|----|R|-+ - | | | | <B-----------|-|-|-|-|----|R|-+ - | | | | <C-----------|-|-|-|-|----|R|-+ - | | | ~En| <D-----------|-|-|-|-|----|R|-+ - | | | +-> <E-----------|-|-|-|-|----|R|-+ - | | | | | A B C <F-----------|-|-|-|-|----|R|-+ - | | | | +-^-^-^--+ 0 1 2 3 4 5 6 7 33K*8 - | | | | | | | +-----------------+ - | | | | | | | | LS145 | - Vcc | | | | | | | +-^--^--^--^------+ - --- | | | | | | | A B C D +-------+ - | | | | | | | | | | | | | | - 1-2 3 4 14 15 5 6 7 8 9 10 11 12-13 | - +--------------------------------------------------+ | - | connector | --- - +--------------------------------------------------+ GND - - -Signals charts --------------- - While pressing space bar, watched HHKB Pro original controller signals by logic analyzer. - Row and column is looping between 0-7 each for selecting a key. - A key is scaned every about 15ms, so scan rate is 66Hz. - - (HHKB_chart1.jpg) - - Space bar locate at ROW:3 COL:7. A key is selected by HC4051(C,B,A) and LS145(C,B,A). - Key state can be read on TP1684(4/KEY) while asserting low on LS145(D). - - (HHKB_chart2.jpg) - - - Signal of JP: - - 1) Select row - rowC ____~~~~____~~~~ 3.8/3.8ms(JP) 7.7/7.7ms(Pro) S2 of HC4051 - rowB __~~__~~__~~__~~ 1.9/1.9ms(JP) 3.8/3.8ms(Pro) S1 of HC4051 - rowA _~_~_~_~_~_~_~_~ 1.0/1.0ms(JP) 1.9/1.9ms(Pro) S0 of HC4051 - 0123456701234567 selected row(Pro) - 0123456789ABCDEF selected row(JP) - rowEn0 ________~~~~~~~~ 7.7/7.7ms(JP only) ~Enable of Z2 HC4051(JP only) - rowEn1 ~~~~~~~~________ 7.7/7.7ms(JP only) ~Enable of Z3 HC4051(JP only) - - 2) Select column - colC ____~~~~____~~~~ 550/410us(JP) / us(Pro) - colB __~~__~~__~~__~~ 200/210us(JP) 450/460us(Pro) - colA _~_~_~_~_~_~_~_~ 100/110us(JP) 220/230us(Pro) - 0123456701234567 selected column - - 3) Wait 5us after column select, then set prev, strobe colD to spit out key status and read it. - hys _~~~~_____ 20us if previous key state is low - colD ~~~__~~~~~ 10us strobe - key ~~~____~~~ 22us indicates current state of the key - - NOTE: JP scans twice fast as Pro/Pro2 does. So Pro/Pro2 scans 8x8 matrix in 15.4ms while JP scans 16x8 in that time. - - - -EOF |