[Erez & Jack] Removes keyboards which are not active on qmk

15 files changed, 0 insertions, 717 deletions

diff --git a/keyboard/macway/Makefile.lufa b/keyboard/macway/Makefile.lufa
deleted file mode 100644
index 8fff93ada..000000000
--- a/keyboard/macway/Makefile.lufa
+++ /dev/null
@@ -1,121 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = macway_lufa
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC +=	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/keyboard/macway/Makefile.pjrc b/keyboard/macway/Makefile.pjrc
deleted file mode 100644
index 6ee25b61a..000000000
--- a/keyboard/macway/Makefile.pjrc
+++ /dev/null
@@ -1,97 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = macway_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/keyboard/macway/config.h b/keyboard/macway/config.h
deleted file mode 100644
index e87da1ffa..000000000
--- a/keyboard/macway/config.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xBEE0
-#define DEVICE_VER      0x0202
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         Macway mod
-
-/* message strings */
-#define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
-
-/* matrix size */
-#define MATRIX_ROWS 9
-#define MATRIX_COLS 8
-
-/* define if matrix has ghost */
-#define MATRIX_HAS_GHOST
-
-/* Set 0 if need no debouncing */
-#define DEBOUNCE    5
-
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* PS/2 mouse */
-#ifdef PS2_MOUSE_ENABLE
-#   define PS2_CLOCK_PORT  PORTF
-#   define PS2_CLOCK_PIN   PINF
-#   define PS2_CLOCK_DDR   DDRF
-#   define PS2_CLOCK_BIT   0
-#   define PS2_DATA_PORT   PORTF
-#   define PS2_DATA_PIN    PINF
-#   define PS2_DATA_DDR    DDRF
-#   define PS2_DATA_BIT    1
-#endif
-
-#endif
diff --git a/keyboard/macway/doc/back.jpg b/keyboard/macway/doc/back.jpg
deleted file mode 100644
index 0774401f6..000000000
--- a/keyboard/macway/doc/back.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/case.jpg b/keyboard/macway/doc/case.jpg
deleted file mode 100644
index c776d5e05..000000000
--- a/keyboard/macway/doc/case.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/keys.jpg b/keyboard/macway/doc/keys.jpg
deleted file mode 100644
index f340ebe8e..000000000
--- a/keyboard/macway/doc/keys.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/side.jpg b/keyboard/macway/doc/side.jpg
deleted file mode 100644
index bdf8268f2..000000000
--- a/keyboard/macway/doc/side.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/switch.jpg b/keyboard/macway/doc/switch.jpg
deleted file mode 100644
index a1500d707..000000000
--- a/keyboard/macway/doc/switch.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/teensy.jpg b/keyboard/macway/doc/teensy.jpg
deleted file mode 100644
index 07207475d..000000000
--- a/keyboard/macway/doc/teensy.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/wiring.jpg b/keyboard/macway/doc/wiring.jpg
deleted file mode 100644
index 0f3490f10..000000000
--- a/keyboard/macway/doc/wiring.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/withHHKB.jpg b/keyboard/macway/doc/withHHKB.jpg
deleted file mode 100644
index 9921856e7..000000000
--- a/keyboard/macway/doc/withHHKB.jpg
+++ /dev/null
diff --git a/keyboard/macway/doc/withThinkPad.jpg b/keyboard/macway/doc/withThinkPad.jpg
deleted file mode 100644
index 231c61d03..000000000
--- a/keyboard/macway/doc/withThinkPad.jpg
+++ /dev/null
diff --git a/keyboard/macway/keymap.c b/keyboard/macway/keymap.c
deleted file mode 100644
index b77348494..000000000
--- a/keyboard/macway/keymap.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/* 
- * Keymap for Macway mod
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( \
-    K11, K10, K20, K30, K40, K41, K51, K50, K60, K70, K80, K81, K61, K02, \
-    K12, K13, K23, K33, K43, K42, K52, K53, K63, K73, K83, K82, K62, K01, \
-    K15, K14, K24, K34, K44, K45, K55, K54, K64, K74, K84, K85, K06, \
-    K67, K16, K26, K36, K46, K47, K57, K56, K66, K76, K87, K32, K35, \
-    K75, K22, K00, K07, K21, K04, K37, K27, K17 \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_NO,    KC_##K04, KC_NO,    KC_##K06, KC_##K07 }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_NO,    KC_##K26, KC_##K27 }, \
-    { KC_##K30, KC_NO,    KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_NO,    KC_##K66, KC_##K67 }, \
-    { KC_##K70, KC_NO,    KC_NO,    KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO    }, \
-    { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_NO,    KC_##K87 } \
-}
-
-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
-    0,              // Fn0
-    1,              // Fn1
-    2,              // Fn2
-    3,              // Fn3
-    4,              // Fn4
-    0,              // Fn5
-    3,              // Fn6
-    3               // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
-    KC_NO,          // Fn0
-    KC_NO,          // Fn1
-    KC_SLSH,        // Fn2
-    KC_SCLN,        // Fn3
-    KC_SPC,         // Fn4
-    KC_NO,          // Fn5
-    KC_NO,          // Fn6
-    KC_NO           // Fn7
-};
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Layer 0: Default Layer
-     * ,-----------------------------------------------------------.
-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     |
-     * |-----------------------------------------------------'     |
-     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn1|
-     * |-----------------------------------------------------------|
-     * |Fn7|Gui |Alt  |Fn4                   |Alt  |Gui|Fn6|Fn6|Ctr|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP(ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
-           TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
-           LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,ENT, \
-           LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, RSFT,FN1, \
-           FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL),
-
-
-    /* Layer 1: HHKB mode (HHKB Fn)
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-     * |-----------------------------------------------------------|
-     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
-     * |-----------------------------------------------------'     |
-     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift |xxx|
-     * |-----------------------------------------------------------|
-     * |   |Gui |Alt  |                      |Alt  |Gui|   |   |Ctr|
-     * `-----------------------------------------------------------'
-     */ 
-    KEYMAP(PWR, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
-           CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  INS, NLCK,\
-           LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
-           LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
-           NO,  LGUI,LALT,SPC, RALT,NO,  NO,  NO,  RCTL),
-
-
-    /* Layer 2: Vi mode (Quote/Rmeta)
-     * ,-----------------------------------------------------------.
-     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
-     * |-----------------------------------------------------------|
-     * |  \  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
-     * |-----------------------------------------------------'     |
-     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |   \    |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|xxx|Shift |   |
-     * |-----------------------------------------------------------|
-     * |   |Gui |Alt  |Space                 |Alt  |Gui|Fn6|Fn6|Ctr|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
-           BSLS,HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  NO,  \
-           LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  BSLS, \
-           LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT,NO, \
-           NO,  LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL),
-
-
-    /* Layer 3: Mouse mode (Semicolon)
-     * ,-----------------------------------------------------------.
-     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
-     * |-----------------------------------------------------------|
-     * |  \  |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR|   |   |   |     |
-     * |-----------------------------------------------------'     |
-     * |Contro|   |McL|McD|McR|   |McL|McD|McU|McR|xxx|   |   \    |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |Mb1|Mb2|Mb3|Mb2|Mb1|   |   |   |Shift |   |
-     * |-----------------------------------------------------------|
-     * |xxx|Gui |Alt  |Mb1                   |Alt  |   |   |   |   |
-     * `-----------------------------------------------------------'
-     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
-     */
-    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
-           BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  NO,  \
-           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  BSLS, \
-           LSFT,NO,  NO,  BTN1,BTN2,BTN3,BTN2,BTN1,NO,  NO,  NO,  RSFT,NO, \
-           FN7, LGUI,LALT,BTN1,RALT,NO,  FN6, FN6, NO),
-
-
-    /* Layer 4: Matias half keyboard style (Space)
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-     * |-----------------------------------------------------------|
-     * |Backs|  P|  O|  I|  U|  Y|  T|  R|  E|  W|  Q|Tab|Tab|     |
-     * |-----------------------------------------------------'     |
-     * |Contro|  ;|  L|  K|  J|  H|  G|  F|  D|  S|  A|Con|Control |
-     * |-----------------------------------------------------------|
-     * |Shift   |  /|  .|  ,|  M|  N|  B|  V|  C|  X|  Z|Shift |   |
-     * |-----------------------------------------------------------|
-     * |   |Gui |Alt  |xxxxxxxxxxxxxxxxxxxxxx|Alt  |Gui|   |   |Ctr|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP(MINS,0,   9,   8,   7,   6,   5,   4,   3,   2,   1,   NO,  NO,  ESC, \
-           BSPC,P,   O,   I,   U,   Y,   T,   R,   E,   W,   Q,   TAB, TAB, TAB, \
-           LCTL,SCLN,L,   K,   J,   H,   G,   F,   D,   S,   A,   RCTL,RCTL, \
-           LSFT,SLSH,DOT, COMM,M,   N,   B,   V,   C,   X,   Z,   RSFT,NO, \
-           NO,  LGUI,LALT,FN4, RALT,RGUI,NO,  NO,  RCTL),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
-    return KEYCODE(layer, row, col);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
-    return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
-    return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/keyboard/macway/led.c b/keyboard/macway/led.c
deleted file mode 100644
index f76545f0b..000000000
--- a/keyboard/macway/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-}
diff --git a/keyboard/macway/matrix.c b/keyboard/macway/matrix.c
deleted file mode 100644
index 3d10b304d..000000000
--- a/keyboard/macway/matrix.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE	5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-static matrix_row_t read_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    // Input with pull-up(DDR:0, PORT:1)
-    DDRB = 0x00;
-    PORTB = 0xFF;
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-
-    }
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < matrix_rows(); row++) {
-        phex(row); print(": ");
-        pbin_reverse(matrix_get_row(row));
-#ifdef MATRIX_HAS_GHOST
-        if (matrix_has_ghost_in_row(row)) {
-            print(" <ghost");
-        }
-#endif
-        print("\n");
-    }
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
-    // no ghost exists in case less than 2 keys on
-    if (((matrix[row] - 1) & matrix[row]) == 0)
-        return false;
-
-    // ghost exists in case same state as other row
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        if (i != row && (matrix[i] & matrix[row]))
-            return true;
-    }
-    return false;
-}
-#endif
-
-inline
-static matrix_row_t read_cols(void)
-{
-    return ~PINB;
-}
-
-inline
-static void unselect_rows(void)
-{
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    DDRC  &= ~0b01000000; // PC: 6
-    PORTC &= ~0b01000000;
-    DDRD  &= ~0b11100111; // PD: 7,6,5,2,1,0
-    PORTD &= ~0b11100111;
-    DDRF  &= ~0b11000000; // PF: 7,6
-    PORTF &= ~0b11000000;
-}
-
-inline
-static void select_row(uint8_t row)
-{
-    // Output low(DDR:1, PORT:0) to select
-    // row: 0    1    2    3    4    5    6    7    8
-    // pin: PD0, PD5, PD7, PF6, PD6, PD1, PD2, PC6, PF7
-    switch (row) {
-        case 0:
-            DDRD  |= (1<<0);
-            PORTD &= ~(1<<0);
-            break;
-        case 1:
-            DDRD  |= (1<<5);
-            PORTD &= ~(1<<5);
-            break;
-        case 2:
-            DDRD  |= (1<<7);
-            PORTD &= ~(1<<7);
-            break;
-        case 3:
-            DDRF  |= (1<<6);
-            PORTF &= ~(1<<6);
-            break;
-        case 4:
-            DDRD  |= (1<<6);
-            PORTD &= ~(1<<6);
-            break;
-        case 5:
-            DDRD  |= (1<<1);
-            PORTD &= ~(1<<1);
-            break;
-        case 6:
-            DDRD  |= (1<<2);
-            PORTD &= ~(1<<2);
-            break;
-        case 7:
-            DDRC  |= (1<<6);
-            PORTC &= ~(1<<6);
-            break;
-        case 8:
-            DDRF  |= (1<<7);
-            PORTF &= ~(1<<7);
-            break;
-    }
-}