Merge branch 'gh60'

7 files changed, 815 insertions, 0 deletions

diff --git a/keyboard/gh60/Makefile.lufa b/keyboard/gh60/Makefile.lufa
new file mode 100644
index 000000000..45402bb38
--- /dev/null
+++ b/keyboard/gh60/Makefile.lufa
@@ -0,0 +1,123 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC +=	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DPLAIN_MAP
+plain: all
diff --git a/keyboard/gh60/Makefile.pjrc b/keyboard/gh60/Makefile.pjrc
new file mode 100644
index 000000000..6b3a8d1ac
--- /dev/null
+++ b/keyboard/gh60/Makefile.pjrc
@@ -0,0 +1,93 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+CONSOLE_ENABLE = yes    # Console for debug
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DPLAIN_MAP
+plain: all
diff --git a/keyboard/gh60/README.md b/keyboard/gh60/README.md
new file mode 100644
index 000000000..73eb4b6d5
--- /dev/null
+++ b/keyboard/gh60/README.md
@@ -0,0 +1,89 @@
+GH60 keyboard firmware
+======================
+DIY compact keyboard designed and run by komar007 and Geekhack community.
+
+## Threads on Geekhack.org
+- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
+- [Beta-test](http://geekhack.org/index.php?topic=37570.0)
+
+
+## Build
+Move to this directory then just run `make` like:
+
+   $ make -f Makfile.pjrc
+
+
+## Keymap
+See keymap.c to define your own favourite keymap.
+
+###Keymap with funky layers.
+    Layer 0: Default Layer
+    ,-----------------------------------------------------------.
+    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+    |-----------------------------------------------------------|
+    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+    |-----------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Fn1 |
+    `-----------------------------------------------------------'
+
+    Layer 1: HHKB mode
+    ,-----------------------------------------------------------.
+    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+    |-----------------------------------------------------------|
+    |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Inser|
+    |-----------------------------------------------------------|
+    |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+    |-----------------------------------------------------------|
+    |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |xxx |
+    `-----------------------------------------------------------'
+
+    Layer 2: Vi mode
+    ,-----------------------------------------------------------.
+    |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
+    |-----------------------------------------------------------|
+    |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+    |-----------------------------------------------------------|
+    |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|xxx|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
+    `-----------------------------------------------------------'
+
+    Layer 3: Mouse mode
+    ,-----------------------------------------------------------.
+    |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR|   |   |   |     |
+    |-----------------------------------------------------------|
+    |Contro|   |McL|McD|McR|   |McL|McD|McU|McR|xxx|   |Return  |
+    |-----------------------------------------------------------|
+    |Shift   |   |   |Mb1|Mb2|Mb3|Mb2|Mb1|   |   |   |Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Alt |Gui |xxx |Ctrl|
+    `-----------------------------------------------------------'
+    Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
+
+### Plain keymap without Fn layer.
+This will be useful if you want to use key mapping tool like AHK.
+To get this plain keymap run:
+
+    $ make -f Makefile.pjrc plain
+
+    ,-----------------------------------------------------------.
+    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+    |-----------------------------------------------------------|
+    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+    |-----------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
+    `-----------------------------------------------------------'
diff --git a/keyboard/gh60/config.h b/keyboard/gh60/config.h
new file mode 100644
index 000000000..6e7b1bd7a
--- /dev/null
+++ b/keyboard/gh60/config.h
@@ -0,0 +1,50 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+
+
+/* message strings */
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+
+/* matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE    5
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
diff --git a/keyboard/gh60/keymap.c b/keyboard/gh60/keymap.c
new file mode 100644
index 000000000..2608c98c2
--- /dev/null
+++ b/keyboard/gh60/keymap.c
@@ -0,0 +1,202 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+/* GH60 keymap definition macro 
+ * K2C, K31 and  K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \
+}
+
+/* ANSI valiant. No extra keys for ISO */
+#define KEYMAP_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \ 
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+)
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    1,              // Fn1
+    2,              // Fn2
+    3,              // Fn3
+    3,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KC_NO,          // Fn0
+    KC_NO,          // Fn1
+    KC_SLSH,        // Fn2
+    KC_SCLN,        // Fn3
+    KC_NO,          // Fn4
+    KC_NO,          // Fn5
+    KC_NO,          // Fn6
+    KC_NO           // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+#ifdef PLAIN_MAP
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+           TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+           CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NO,  ENT,  \
+           LSFT,NO,  Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,NO,  RSFT, \
+           LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL),
+#else
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Fn4 |Fn4 |Fn1 |
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_ANSI(
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,     ENT,  \
+        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2,           RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,FN4, FN4, FN1),
+    /* Layer 1: HHKB mode
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Inser|
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |xxx |
+     * `-----------------------------------------------------------'
+     */ 
+    KEYMAP_ANSI(
+        PWR, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,  \
+        CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,  INS,  \
+        LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,     ENT,  \
+        LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,          RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, FN1),
+    /* Layer 2: Vi mode (Slash)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|xxx|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_ANSI(
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, BSPC, \
+        TAB, HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  NO,   \
+        LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       ENT,  \
+        LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2,           RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL),
+    /* Layer 3: Mouse mode (Semicolon/App)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|MwU|MwR|   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|   |Ac0|Ac1|Ac1|   |McL|McD|McU|McR|xxx|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |    |xxx |xxx |    |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
+     */
+    KEYMAP_ANSI(
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, BSPC, \
+        TAB, NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  NO,   \
+        LCTL,NO,  ACL0,ACL1,ACL2,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,       ENT,  \
+        LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,BTN4,BTN5,NO,            RSFT, \
+        LCTL,LGUI,LALT,          BTN1,                    NO,  FN4, FN4, NO  ),
+#endif
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t index)
+{
+    return pgm_read_byte(&fn_layer[index]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t index)
+{
+    return pgm_read_byte(&fn_keycode[index]);
+}
diff --git a/keyboard/gh60/led.c b/keyboard/gh60/led.c
new file mode 100644
index 000000000..62abcd79d
--- /dev/null
+++ b/keyboard/gh60/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<2);
+        PORTB &= ~(1<<2);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<2);
+        PORTB &= ~(1<<2);
+    }
+}
diff --git a/keyboard/gh60/matrix.c b/keyboard/gh60/matrix.c
new file mode 100644
index 000000000..6ded8158f
--- /dev/null
+++ b/keyboard/gh60/matrix.c
@@ -0,0 +1,224 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static uint16_t *matrix;
+static uint16_t *matrix_debouncing;
+static uint16_t matrix0[MATRIX_ROWS];
+static uint16_t matrix1[MATRIX_ROWS];
+static bool is_modified;
+
+static uint16_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    matrix = matrix0;
+    matrix_debouncing = matrix1;
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+    is_modified = false;
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        //unselect_rows();
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        uint16_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+            is_modified = false;
+        }
+        unselect_rows();
+    }
+    //unselect_rows();
+
+    if (debouncing) {
+        debouncing--;
+        _delay_ms(1);
+    } else {
+        uint16_t *tmp = matrix;
+        matrix = matrix_debouncing;
+        matrix_debouncing = tmp;
+        is_modified = true;
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint16_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567890ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+/* Column pin configuration
+ * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+ * pin: F0  F1  E6  C7  C6  B6  D4  B1  B0  B5  B4  D7  D6  B3
+ */
+static void  init_cols(void)
+{
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRF  &= ~(1<<0 | 1<<1);
+    PORTF |=  (1<<0 | 1<<1);
+    DDRE  &= ~(1<<6);
+    PORTE |=  (1<<6);
+    DDRD  &= ~(1<<7 | 1<<6 | 1<<4);
+    PORTD |=  (1<<7 | 1<<6 | 1<<4);
+    DDRC  &= ~(1<<7 | 1<<6);
+    PORTC |=  (1<<7 | 1<<6);
+    DDRB  &= ~(1<<6 | 1<< 5 | 1<<4 | 1<<3 | 1<<1 | 1<<0);
+    PORTB |=  (1<<6 | 1<< 5 | 1<<4 | 1<<3 | 1<<1 | 1<<0);
+}
+
+static uint16_t read_cols(void)
+{
+    return (PINF&(1<<0) ? 0 : (1<<0)) |
+           (PINF&(1<<1) ? 0 : (1<<1)) |
+           (PINE&(1<<6) ? 0 : (1<<2)) |
+           (PINC&(1<<7) ? 0 : (1<<3)) |
+           (PINC&(1<<6) ? 0 : (1<<4)) |
+           (PINB&(1<<6) ? 0 : (1<<5)) |
+           (PIND&(1<<4) ? 0 : (1<<6)) |
+           (PINB&(1<<1) ? 0 : (1<<7)) |
+           (PINB&(1<<0) ? 0 : (1<<8)) |
+           (PINB&(1<<5) ? 0 : (1<<9)) |
+           (PINB&(1<<4) ? 0 : (1<<10)) |
+           (PIND&(1<<7) ? 0 : (1<<11)) |
+           (PIND&(1<<6) ? 0 : (1<<12)) |
+           (PINB&(1<<3) ? 0 : (1<<13));
+}
+
+/* Row pin configuration
+ * row: 0   1   2   3   4
+ * pin: D0  D1  D2  D3  D5
+ */
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRD  &= ~0b00101111;
+    PORTD &= ~0b00101111;
+}
+
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 2:
+            DDRD  |= (1<<2);
+            PORTD &= ~(1<<2);
+            break;
+        case 3:
+            DDRD  |= (1<<3);
+            PORTD &= ~(1<<3);
+            break;
+        case 4:
+            DDRD  |= (1<<5);
+            PORTD &= ~(1<<5);
+            break;
+    }
+}