diff options
author | Benjamin Grabkowitz <profet23@users.noreply.github.com> | 2016-11-16 23:52:36 -0500 |
---|---|---|
committer | Benjamin Grabkowitz <profet23@users.noreply.github.com> | 2016-11-16 23:52:36 -0500 |
commit | 00d88b74ada77b7cbf452aaf622846f80d85d732 (patch) | |
tree | 799a97f33b8b373856cf36d57280950d12f2709e /keyboards/atreus62/rules.mk | |
parent | a9e0fd410ce7c8b975ba72cd7900c3f6edc0d108 (diff) | |
download | qmk_firmware-00d88b74ada77b7cbf452aaf622846f80d85d732.tar.gz |
Adding Support for atreus62 keyboard. https://github.com/profet23/atreus62
Diffstat (limited to 'keyboards/atreus62/rules.mk')
-rw-r--r-- | keyboards/atreus62/rules.mk | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk new file mode 100644 index 000000000..f5d0be23a --- /dev/null +++ b/keyboards/atreus62/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +#BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +#MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode +#BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend |