[Keymap] Corne keyap with tap dance Swedish support (#6857)

* Adding profile for Corne with tap dance Swedish support.

* Remove extern keymap_config_t keymap_config as no longer needed

* Changed to use tap_code over register_code

* Removed persistent_default_layer_set

* Moved macros to hvp user space ink tap dance code

* Removed not used functions

* Moved to an ifbased include statement

* Removed not needed characters

1 files changed, 183 insertions, 0 deletions

diff --git a/keyboards/crkbd/keymaps/hvp/keymap.c b/keyboards/crkbd/keymaps/hvp/keymap.c
new file mode 100644
index 000000000..b66c360e1
--- /dev/null
+++ b/keyboards/crkbd/keymaps/hvp/keymap.c
@@ -0,0 +1,183 @@
+#include QMK_KEYBOARD_H
+#include "hvp.c"
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,KC_BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    LT(_ADJUST, KC_ESC),  KC_A,  KC_S,  KC_D,  LT(_RAISE,KC_F),  MT(MOD_LCTL,KC_G), KC_H,  KC_J,  KC_K,  KC_L,TD(TD1),TD(TD2),\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  ),
+  
+  [_RAISE] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_TAB,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,                   KC_6,  KC_7,  KC_8,  KC_9,  KC_0,KC_BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO, KC_DEL,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+      KC_F1,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                  KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,                 KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RESET,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,                 KC_MPLY, KC_MNXT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    // If you want to change the display of OLED, you need to change here
+    matrix_write_ln(matrix, read_layer_state());
+    matrix_write_ln(matrix, read_keylog());
+    //matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //matrix_write_ln(matrix, read_host_led_state());
+    //matrix_write_ln(matrix, read_timelog());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef SSD1306OLED
+    set_keylog(keycode, record);
+#endif
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file