Creates a layouts/ folder for keymaps shared between keyboards (#1609)

* include variables and .h files as pp directives

* start layout compilation

* split ergodoxes up

* don't compile all layouts for everything

* might seg fault

* reset layouts variable

* actually reset layouts

* include rules.mk instead

* remove includes from rules.mk

* update variable setting

* load visualizer from path

* adds some more examples

* adds more layouts

* more boards added

* more boards added

* adds documentation for layouts

* use lowercase names for LAYOUT_

* add layout.json files for each layout

* add community folder, default keymaps for layouts

* touch-up default layouts

* touch-up layouts, some keyboard rules.mk

* update documentation for layouts

* fix up serial/i2c switches

1 files changed, 89 insertions, 0 deletions

diff --git a/keyboards/ergodox_infinity/rules.mk b/keyboards/ergodox_infinity/rules.mk
new file mode 100644
index 000000000..cb1115255
--- /dev/null
+++ b/keyboards/ergodox_infinity/rules.mk
@@ -0,0 +1,89 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity 60%
+#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+#   comment out to disable the options.
+#
+
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes # Unicode
+ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+
+CUSTOM_MATRIX = yes # Custom matrix file
+SERIAL_LINK_ENABLE = yes
+VISUALIZER_ENABLE = yes
+LCD_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+LCD_BACKLIGHT_ENABLE = yes
+MIDI_ENABLE = no
+RGBLIGHT_ENABLE = no
+
+LCD_DRIVER = st7565
+LCD_WIDTH = 128 
+LCD_HEIGHT = 32
+
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 7 
+LED_HEIGHT = 7
+
+LAYOUTS = ergodox ergodox_80
\ No newline at end of file