Add support for Unikeyboard Felix

6 files changed, 168 insertions, 0 deletions

diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h
new file mode 100644
index 000000000..f70089af4
--- /dev/null
+++ b/keyboards/felix/config.h
@@ -0,0 +1,56 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Unikeyboard
+#define PRODUCT         Felix
+#define DESCRIPTION     4x5 number/macropad.
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
+#define MATRIX_COL_PINS { B5, B4, E6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* number of backlight levels */
+/* Not sure what pin controls the backlighting, need help for this. */
+#define BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* there is no rgb underglow by default. */
+#define RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
\ No newline at end of file
diff --git a/keyboards/felix/felix.c b/keyboards/felix/felix.c
new file mode 100644
index 000000000..013360d04
--- /dev/null
+++ b/keyboards/felix/felix.c
@@ -0,0 +1 @@
+#include "felix.h"
diff --git a/keyboards/felix/felix.h b/keyboards/felix/felix.h
new file mode 100644
index 000000000..48110e850
--- /dev/null
+++ b/keyboards/felix/felix.h
@@ -0,0 +1,20 @@
+#ifndef FELIX_H
+#define FELIX_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    K000, K001, K002, K003, \
+    K100, K101, K102, K103, \
+    K200, K201, K202, K203, \
+    K300, K301, K302, K303, \
+    K400, K401, K402, K403  \
+) { \
+    { K000, K001, K002, K003 }, \
+    { K100, K101, K102, K103 }, \
+    { K200, K201, K202, K203 }, \
+    { K300, K301, K302, K303 }, \
+    { K400, K401, K402, K403 }  \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/felix/keymaps/default/keymap.c b/keyboards/felix/keymaps/default/keymap.c
new file mode 100644
index 000000000..25e4bc130
--- /dev/null
+++ b/keyboards/felix/keymaps/default/keymap.c
@@ -0,0 +1,22 @@
+#include "felix.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    KEYMAP(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_P4,   KC_P5,   KC_P6,   KC_HOME,
+        KC_P1,   KC_P2,   KC_P3,   KC_END,
+        KC_P0,   KC_PEQL, KC_PDOT, KC_PENT),
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+}
+  
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  }
+  return true;
+}
diff --git a/keyboards/felix/readme.md b/keyboards/felix/readme.md
new file mode 100644
index 000000000..1b5f4b42e
--- /dev/null
+++ b/keyboards/felix/readme.md
@@ -0,0 +1,13 @@
+# Felix
+
+A customizable number/macropad made by Unikeyboard.
+
+Keyboard Maintainer: [QMK Community](https://github.com/qmk)  
+Hardware Supported: Felix PCB, Pro Micro  
+Hardware Availability: [Unikeyboard](https://unikeyboard.io/product/felix/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make felix-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk
new file mode 100644
index 000000000..58798b761
--- /dev/null
+++ b/keyboards/felix/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
\ No newline at end of file