2020 February 29 Breaking Changes Update (#8064)

1 files changed, 0 insertions, 28 deletions

diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md
deleted file mode 100644
index 223fdf3d3..000000000
--- a/keyboards/gonnerd/readme.md
+++ /dev/null
@@ -1,28 +0,0 @@
-GON NerD
-========
-
-A Korean Custom TKL.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: GON NerD TKL PCB  
-Hardware Availability: [gonskeyboardworks.com](http://www.gonskeyboardworks.com/pcbs-and-controllers/60-nerd-tkl-ver20-pcb.html)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make gonnerd:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-## Changing Bootloader
-
-It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
-
-It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
-[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
-
-_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
-not work anymore. You will lose your warranty and official support from GON!_
-
-## Reset button
-
-To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins.