[Keyboard] Add: Initial steamvan firmware code (#6501)

* Add: Initial steamvan firmware code

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update: Remove old macro commands, per reviewer comments

* Apply suggestions from code review

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update: Remove redundant backlight struct

* Update: Replace preprocessor defines with enum

1 files changed, 70 insertions, 0 deletions

diff --git a/keyboards/handwired/steamvan/rev1/config.h b/keyboards/handwired/steamvan/rev1/config.h
new file mode 100644
index 000000000..f10f42966
--- /dev/null
+++ b/keyboards/handwired/steamvan/rev1/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2019 John M Daly <jmdaly@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    John M Daly
+#define PRODUCT         SteamVan rev1
+#define DESCRIPTION     An open hardware forty percent PCB
+
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* ROWS: Top to bottom, COLS: Left to right
+*/
+#define MATRIX_ROW_PINS { A6, A5, A4, A3 }
+#define MATRIX_COL_PINS { A9, A8, B15, B14, B13, A10, B9, B6, B5, B4, B3, A15 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ * Backlight LEDs on B8
+ */
+#define BACKLIGHT_LEVELS 24
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+#define RGBLIGHT_ANIMATIONS
+
+#define RGBLED_NUM 16
+#define RGB_DI_PIN A7
+#define DRIVER_LED_TOTAL RGBLED_NUM
+
+#define RGB_MATRIX_KEYPRESSES