diff options
| author |  Luiz Ribeiro <luizribeiro@gmail.com> | 2017-07-04 11:17:28 -0400 |
|---|---|---|
| committer | Luiz Ribeiro <luizribeiro@gmail.com> | 2017-07-04 11:17:28 -0400 |
| commit | d5486265b8afcada68306c815b08c225fce287af (patch) | |
| tree | 8fb7f8fee4aa3937003bd69d5c77ca867c010d12 /keyboards/lets_split/readme.md | |
| parent | 738b072bb0f25d0369a998c550c369e4f64cc7a5 (diff) | |
| parent | 34c8bf47a76c8a2dcd3b1a19dd608f8fb2fafb31 (diff) | |
| download | qmk_firmware-d5486265b8afcada68306c815b08c225fce287af.tar.gz | |
Merge branch 'master' into ps2avrGB
Diffstat (limited to 'keyboards/lets_split/readme.md')
| -rw-r--r-- | keyboards/lets_split/readme.md | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index 7e5a54602..610b776ee 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -6,6 +6,7 @@ This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards. +**Hardware files for the Let's Split are now stored at http://qmk.fm/lets_split/** ## Build Guide @@ -18,14 +19,13 @@ There is additional information there about flashing and adding RGB underglow. Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using: ``` -$ make rev2 +$ make rev2-default ``` -You will see a lot of output and if everything worked correctly you will see the built hex files: +You will see a lot of output and if everything worked correctly you will see the built hex file: ``` -lets_split_rev2_serial.hex -lets_split_rev2_i2c.hex +lets_split_rev2_default.hex ``` If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: @@ -90,16 +90,18 @@ and modify the `matrix.c` accordingly. The wiring for serial: - + The wiring for i2c: - + The pull-up resistors may be placed on either half. It is also possible to use 4 resistors and have the pull-ups in both halves, but this is unnecessary in simple use cases. +You can change your configuration between serial and i2c by modifying your `config.h` file. + Notes on Software Configuration ------------------------------- @@ -114,7 +116,7 @@ not be very difficult to adapt it to support more if required. Flashing ------- From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. -Example: `make rev2-serial-avrdude` +Example: `make rev2-default-avrdude` Choosing which board to plug the USB cable into (choosing Master) |