Merge remote-tracking branch 'upstream/master'

17 files changed, 52 insertions, 141 deletions

diff --git a/keyboards/sentraq/s60_x/default/rules.mk b/keyboards/sentraq/s60_x/default/rules.mk
index af43bf6c5..8b3674cd8 100644
--- a/keyboards/sentraq/s60_x/default/rules.mk
+++ b/keyboards/sentraq/s60_x/default/rules.mk
@@ -1,55 +1,16 @@
-
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   change yes to no to disable
 #
@@ -64,5 +25,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
\ No newline at end of file
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
diff --git a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c
index 08780a28c..f7a66b96f 100644
--- a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c
+++ b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c
@@ -31,14 +31,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define KC_SPACEFN KC_FN0
 #define KC_OSLS KC_FN3
 #define KC_GMLK KC_FN1
-#define KC_FUNC KC_FN2
+#define KC_FUNC MO(2)
 #define MICMUTE RCTL(KC_LCTL)
 
 enum function_codes {
     F_SPACEFN = 0,
     F_OSLS = 3,
     F_GMLK = 1,
-    F_FUNC = 2
 };
 
 enum layer_names {
@@ -154,15 +153,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 const uint16_t PROGMEM fn_actions[] = {
     [F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    // SpaceFn layout 1
     [F_GMLK] = ACTION_LAYER_TOGGLE(1),                  // Disable SpaceFn and Oneshot Shift
-    [F_FUNC] = ACTION_LAYER_MOMENTARY(2),               // SpaceFn layout 1
     [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT)            // Oneshot Leftshift
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    return MACRO_NONE;
-};
-
 void matrix_init_user(void) {
 
 }
diff --git a/keyboards/sentraq/s60_x/keymaps/custom/readme.md b/keyboards/sentraq/s60_x/keymaps/custom/readme.md
index fd79d5360..88ecdbbfc 100644
--- a/keyboards/sentraq/s60_x/keymaps/custom/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/custom/readme.md
@@ -1,4 +1,4 @@
-### 8  Custom
+### 8  Custom
 The custom keymap - [keymap.c](keymap.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
 
 #### 8.0 Default layer
diff --git a/keyboards/sentraq/s60_x/keymaps/default/readme.md b/keyboards/sentraq/s60_x/keymaps/default/readme.md
index 01cda9df9..8154d114a 100644
--- a/keyboards/sentraq/s60_x/keymaps/default/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/default/readme.md
@@ -1,4 +1,4 @@
-### 1  Standard - ANSI
+### 1  Standard - ANSI
 The standard keymap is the one that is pre-flashed on the S60-X.
 
 #### 1.0 Default layer
diff --git a/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c b/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c
index 76398697c..077f1c627 100644
--- a/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c
+++ b/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c
@@ -1,5 +1,9 @@
 #include QMK_KEYBOARD_H
 
+#define KC_MO4 MO(4)
+#define KC_MO6 MO(6)
+#define KC_MO7 MO(7)
+
 /*
  * Hasu
  */
@@ -22,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L,  FN2, QUOT,   NO,  ENT,       \
         LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT,  FN1,   NO,  FN9,   NO, \
-        LCTL, LGUI, LALT,                SPC,                 RALT,  FN3,  FN3,  FN0),
+        LCTL, LGUI, LALT,                SPC,                 RALT,  MO6,  MO6,  MO4),
     /* Keymap 1: colemak
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -41,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB,    Q,    W,   F,   P,   G,   J,   L,   U,    Y, SCLN, LBRC, RBRC, BSLS,      \
         BSPC,    A,    R,   S,   T,   D,   H,   N,   E,    I,    O, QUOT,   NO,  ENT,      \
         LSFT,   NO,    Z,   X,   C,   V,   B,   K,   M, COMM,  DOT, SLSH,   NO, RSFT,  NO, \
-        LCTL, LGUI, LALT,                SPC,                 RALT, RGUI,  APP,  FN0),
+        LCTL, LGUI, LALT,                SPC,                 RALT, RGUI,  APP,  MO4),
     /* Keymap 2: dvorak
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  [  │  ]  │▒▒▒▒▒│BKSPC│
@@ -60,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB, QUOT, COMM,  DOT,   P,   Y,   F,   G,   C,   R,   L, SLSH,  EQL, BSLS,       \
         CAPS,    A,    O,    E,   U,   I,   D,   H,   T,   N,   S, MINS,   NO,  ENT,       \
         LSFT,   NO, SCLN,    Q,   J,   K,   X,   B,   M,   W,   V,    Z,   NO, RSFT,   NO, \
-        LCTL, LGUI, LALT,                 SPC,               RALT, RGUI,  APP,  FN0),
+        LCTL, LGUI, LALT,                 SPC,               RALT, RGUI,  APP,  MO4),
     /* Keymap 3: workman
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -79,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB,    Q,    D,   R,   W,   B,   J,   F,   U,    P, SCLN, LBRC, RBRC, BSLS,       \
         BSPC,    A,    S,   H,   T,   G,   Y,   N,   E,    O,    I, QUOT,   NO,  ENT,       \
         LSFT,   NO,    Z,   X,   M,   C,   V,   K,   L, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
-        LCTL, LGUI, LALT,                SPC,                 RALT, RGUI,  APP,  FN0),
+        LCTL, LGUI, LALT,                SPC,                 RALT, RGUI,  APP,  MO4),
     /* Overlay 4: HHKB mode
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │
@@ -98,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS,   UP, TRNS,  INS,       \
         LCTL, VOLD, VOLU, MUTE, TRNS, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, TRNS,  ENT,       \
         LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS,  END, PGDN, DOWN, TRNS, RSFT, TRNS, \
-        LCTL, LGUI, LALT,                    SPC,                   RALT, RGUI,  FN4, TRNS),
+        LCTL, LGUI, LALT,                    SPC,                   RALT, RGUI,  MO7, TRNS),
     /* Overlay 5: Vi mode (Slash)
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │Grave│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│
@@ -169,11 +173,8 @@ Lw: set Workman layout
  * Fn action definition
  */
 const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(4),
     [1] = ACTION_LAYER_TAP_KEY(5, KC_SLASH),
     [2] = ACTION_LAYER_TAP_KEY(6, KC_SCLN),
-    [3] = ACTION_LAYER_MOMENTARY(6),
-    [4] = ACTION_LAYER_MOMENTARY(7),   // to Layout selector
     [5] = ACTION_DEFAULT_LAYER_SET(0),  // set qwerty layout
     [6] = ACTION_DEFAULT_LAYER_SET(1),  // set colemak layout
     [7] = ACTION_DEFAULT_LAYER_SET(2),  // set dvorak layout
diff --git a/keyboards/sentraq/s60_x/keymaps/hasu/readme.md b/keyboards/sentraq/s60_x/keymaps/hasu/readme.md
index b79d0e97a..7a8104472 100644
--- a/keyboards/sentraq/s60_x/keymaps/hasu/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/hasu/readme.md
@@ -1,4 +1,4 @@
-### 5. Hasu
+### 5. Hasu
 This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap.c](keymap.c) for detail.
 
 (Hasu is the initial creator of the TMK firmware, in case you weren't aware.)
\ No newline at end of file
diff --git a/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c b/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c
index b572b4484..1ccefb6dd 100644
--- a/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c
+++ b/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c
@@ -1,5 +1,7 @@
 #include QMK_KEYBOARD_H
 
+#define KC_MO1 MO(1)
+
 /*
  * HHKB Layout
  */
@@ -21,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         ESC,    1,    2,   3,   4,   5,   6,   7,   8,    9,    0, MINS,  EQL, BSLS, GRV, \
         TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSPC,      \
         LCTL,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,      \
-        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT, FN0, \
+        LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT, MO1, \
         NO, LGUI, LALT,                SPC,                   NO, RALT, RGUI,   NO),
     /* 1: HHKB Fn layer
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -43,10 +45,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS,  END, PGDN, DOWN,   NO, TRNS, TRNS, \
        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
 };
-
-/*
- * Fn action definition
- */
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),
-};
diff --git a/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md b/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md
index c7dcec899..08df14e48 100644
--- a/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md
@@ -1,4 +1,4 @@
-### 7. HHKB
+### 7. HHKB
 [keymap.c](keymap.c) emulates original HHKB layers.
 #### 7.0: Default layer
     ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
diff --git a/keyboards/sentraq/s60_x/keymaps/iso/readme.md b/keyboards/sentraq/s60_x/keymaps/iso/readme.md
index 2c06bf86f..6b846617d 100644
--- a/keyboards/sentraq/s60_x/keymaps/iso/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/iso/readme.md
@@ -1,4 +1,4 @@
-### 2  Standard - ISO
+### 2  Standard - ISO
 The same as the standard keymap, but with additional ISO keys.
 
 
diff --git a/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c b/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c
index 4d84396e3..4b7208a9e 100644
--- a/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c
+++ b/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c
@@ -16,6 +16,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include QMK_KEYBOARD_H
 
+#define KC_MO1 MO(1)
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/* Layout 0: Default Layer
 	* ,-----------------------------------------------------------.
@@ -35,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
 		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
 		LSFT, NUBS, Z,    X,    C,    V,    B,    N,    M, COMM,  DOT,    SLSH,   NO, RSFT, NO, \
-		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
+		MO1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
 
 	/* Layout 1: Function Layer
 	* ,-----------------------------------------------------------.
@@ -63,7 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 */
 const uint16_t PROGMEM fn_actions[] = {
 	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
-	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
 	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
 	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
 	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
diff --git a/keyboards/sentraq/s60_x/keymaps/plain/readme.md b/keyboards/sentraq/s60_x/keymaps/plain/readme.md
index 02f524495..402aa1bf9 100644
--- a/keyboards/sentraq/s60_x/keymaps/plain/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/plain/readme.md
@@ -1,4 +1,4 @@
-### 4. Plain
+### 4. Plain
 Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
 See [keymap.c](keymap.c) for detail.
 
diff --git a/keyboards/sentraq/s60_x/keymaps/poker/keymap.c b/keyboards/sentraq/s60_x/keymaps/poker/keymap.c
index 61685b477..3b38ed501 100644
--- a/keyboards/sentraq/s60_x/keymaps/poker/keymap.c
+++ b/keyboards/sentraq/s60_x/keymaps/poker/keymap.c
@@ -1,5 +1,8 @@
 #include QMK_KEYBOARD_H
 
+#define KC_MO6 MO(6)
+#define KC_MO7 MO(7)
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
@@ -19,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB,    Q,    W,   E,   R,   T,   Y,   U,   I,    O,    P, LBRC, RBRC, BSLS,       \
         CAPS,    A,    S,   D,   F,   G,   H,   J,   K,    L, SCLN, QUOT,   NO,  ENT,       \
         LSFT,   NO,    Z,   X,   C,   V,   B,   N,   M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
-        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+        LCTL, LGUI, LALT,                SPC,                  MO6, RGUI,  APP, RCTL),
     /* 1: colemak
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -38,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB,    Q,    W,   F,   P,   G,   J,   L,   U,    Y, SCLN, LBRC, RBRC, BSLS,      \
         BSPC,    A,    R,   S,   T,   D,   H,   N,   E,    I,    O, QUOT,   NO,  ENT,      \
         LSFT,   NO,    Z,   X,   C,   V,   B,   K,   M, COMM,  DOT, SLSH,   NO, RSFT,  NO, \
-        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+        LCTL, LGUI, LALT,                SPC,                  MO6, RGUI,  APP, RCTL),
     /* 2: dvorak
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  [  │  ]  │▒▒▒▒▒│BKSPC│
@@ -57,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB, QUOT, COMM,  DOT,   P,   Y,   F,   G,   C,   R,   L, SLSH,  EQL, BSLS,       \
         CAPS,    A,    O,    E,   U,   I,   D,   H,   T,   N,   S, MINS,   NO,  ENT,       \
         LSFT,   NO, SCLN,    Q,   J,   K,   X,   B,   M,   W,   V,    Z,   NO, RSFT,   NO, \
-        LCTL, LGUI, LALT,                 SPC,                FN0, RGUI,  APP, RCTL),
+        LCTL, LGUI, LALT,                 SPC,                MO6, RGUI,  APP, RCTL),
     /* 3: workman
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │GRAVE│  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
@@ -76,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TAB,    Q,    D,   R,   W,   B,   J,   F,   U,    P, SCLN, LBRC, RBRC, BSLS,       \
         BSPC,    A,    S,   H,   T,   G,   Y,   N,   E,    O,    I, QUOT,   NO,  ENT,       \
         LSFT,   NO,    Z,   X,   M,   C,   V,   K,   L, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
-        LCTL, LGUI, LALT,                SPC,                  FN0, RGUI,  APP, RCTL),
+        LCTL, LGUI, LALT,                SPC,                  MO6, RGUI,  APP, RCTL),
     /* 4: Poker with Arrow
 ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
 │     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
@@ -136,7 +139,7 @@ FnS: toggle Arrow overlay
     */
     LAYOUT_kc(
         ESC,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
-        TRNS,  FN2,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS,  FN4,       \
+        TRNS,  FN2,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME,  INS,  MO7,       \
         TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS,  FN3,  END, TRNS, TRNS,       \
         TRNS, TRNS,  DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN,  DEL, TRNS, TRNS, TRNS, \
         TRNS, TRNS, TRNS,                    FN1,                   TRNS, TRNS, TRNS, TRNS),
@@ -168,11 +171,9 @@ Lw: set Workman layout
 };
 const uint16_t PROGMEM fn_actions[] = {
     /* Poker Layout */
-    [0] = ACTION_LAYER_MOMENTARY(6),  // to Fn overlay
     [1] = ACTION_LAYER_TOGGLE(4),     // toggle arrow overlay
     [2] = ACTION_LAYER_TOGGLE(5),     // toggle Esc overlay
     [3] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // Task(RControl,RShift+Esc)
-    [4] = ACTION_LAYER_MOMENTARY(7),  // to Layout selector
     [5] = ACTION_DEFAULT_LAYER_SET(0),  // set qwerty layout
     [6] = ACTION_DEFAULT_LAYER_SET(1),  // set colemak layout
     [7] = ACTION_DEFAULT_LAYER_SET(2),  // set dvorak layout
diff --git a/keyboards/sentraq/s60_x/keymaps/poker/readme.md b/keyboards/sentraq/s60_x/keymaps/poker/readme.md
index 04d2b78be..2fdc9d702 100644
--- a/keyboards/sentraq/s60_x/keymaps/poker/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/poker/readme.md
@@ -1,4 +1,4 @@
-### 3  Poker
+### 3  Poker
 [keymap_poker](../poker/readme.md) emulates original Poker layers
 while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
 
diff --git a/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md b/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md
index 04d2b78be..2fdc9d702 100644
--- a/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md
@@ -1,4 +1,4 @@
-### 3  Poker
+### 3  Poker
 [keymap_poker](../poker/readme.md) emulates original Poker layers
 while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
 
diff --git a/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md b/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md
index 04d2b78be..2fdc9d702 100644
--- a/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md
@@ -1,4 +1,4 @@
-### 3  Poker
+### 3  Poker
 [keymap_poker](../poker/readme.md) emulates original Poker layers
 while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
 
diff --git a/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md b/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md
index fd657f652..3fe215afc 100644
--- a/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md
+++ b/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md
@@ -1,4 +1,4 @@
-### 6. SpaceFN
+### 6. SpaceFN
 This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap.c](keymap.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
 
 #### 6.0 Default layer
diff --git a/keyboards/sentraq/s60_x/rgb/rules.mk b/keyboards/sentraq/s60_x/rgb/rules.mk
index 409d60abf..efd66a1ba 100644
--- a/keyboards/sentraq/s60_x/rgb/rules.mk
+++ b/keyboards/sentraq/s60_x/rgb/rules.mk
@@ -1,55 +1,16 @@
-
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   change yes to no to disable
 #
@@ -69,5 +30,4 @@ NKRO_ENABLE = yes          # USB Nkey Rollover - if this doesn't work, see here:
 BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes      # Enable RGB light
 
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
\ No newline at end of file
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb