Merge branch 'master' into meteor

44 files changed, 3744 insertions, 0 deletions

diff --git a/keyboards/tkc/candybar/bootloader_defs.h b/keyboards/tkc/candybar/bootloader_defs.h
new file mode 100644
index 000000000..43eb7b2f6
--- /dev/null
+++ b/keyboards/tkc/candybar/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
diff --git a/keyboards/tkc/candybar/chconf.h b/keyboards/tkc/candybar/chconf.h
new file mode 100644
index 000000000..03f63da36
--- /dev/null
+++ b/keyboards/tkc/candybar/chconf.h
@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     FALSE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/tkc/candybar/halconf.h b/keyboards/tkc/candybar/halconf.h
new file mode 100644
index 000000000..16f32117d
--- /dev/null
+++ b/keyboards/tkc/candybar/halconf.h
@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/tkc/candybar/lefty/config.h b/keyboards/tkc/candybar/lefty/config.h
new file mode 100644
index 000000000..e8a1f0081
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/config.h
@@ -0,0 +1,115 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x544B //TK
+#define PRODUCT_ID      0x0003
+#define DEVICE_VER      0x0006
+#define MANUFACTURER    The Key Company
+#define PRODUCT         Candybar
+#define DESCRIPTION     A compact staggered 40% keyboard with attached numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 17
+#define DIODE_DIRECTION COL2ROW
+#define MATRIX_ROW_PINS { A8, A9, A10, A13 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 }
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
diff --git a/keyboards/tkc/candybar/lefty/info.json b/keyboards/tkc/candybar/lefty/info.json
new file mode 100644
index 000000000..1ef3dcd54
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/info.json
@@ -0,0 +1,17 @@
+{
+    "keyboard_name": "TKC Candybar",
+    "url": "",
+    "maintainer": "terrymathews",
+    "width": 17,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"7", "x":0, "y":0}, {"label":"8", "x":1, "y":0}, {"label":"9", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"Q", "x":5, "y":0}, {"label":"W", "x":6, "y":0}, {"label":"E", "x":7, "y":0}, {"label":"R", "x":8, "y":0}, {"label":"T", "x":9, "y":0}, {"label":"Y", "x":10, "y":0}, {"label":"U", "x":11, "y":0}, {"label":"I", "x":12, "y":0}, {"label":"O", "x":13, "y":0}, {"label":"P", "x":14, "y":0}, {"label":"{", "x":15, "y":0}, {"label":"}", "x":16, "y":0},
+                {"label":"4", "x":0, "y":1}, {"label":"5", "x":1, "y":1}, {"label":"6", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"Tab", "x":4, "y":1, "w":1.25}, {"label":"A", "x":5.25, "y":1}, {"label":"S", "x":6.25, "y":1}, {"label":"D", "x":7.25, "y":1}, {"label":"F", "x":8.25, "y":1}, {"label":"G", "x":9.25, "y":1}, {"label":"H", "x":10.25, "y":1}, {"label":"J", "x":11.25, "y":1}, {"label":"K", "x":12.25, "y":1}, {"label":"L", "x":13.25, "y":1}, {"label":":", "x":14.25, "y":1}, {"label":"Enter", "x":15.25, "y":1, "w":1.75},
+                {"label":"1", "x":0, "y":2}, {"label":"2", "x":1, "y":2}, {"label":"3", "x":2, "y":2}, {"x":3, "y":2}, {"label":"Shift", "x":4, "y":2, "w":1.75}, {"label":"Z", "x":5.75, "y":2}, {"label":"X", "x":6.75, "y":2}, {"label":"C", "x":7.75, "y":2}, {"label":"V", "x":8.75, "y":2}, {"label":"B", "x":9.75, "y":2}, {"label":"N", "x":10.75, "y":2}, {"label":"M", "x":11.75, "y":2}, {"label":"<", "x":12.75, "y":2}, {"label":">", "x":13.75, "y":2}, {"label":"\u2191", "x":14.75, "y":2}, {"label":"Shift", "x":15.75, "y":2, "w":1.25},
+                {"label":"Fn", "x":0, "y":3}, {"label":"0", "x":1, "y":3}, {"label":".", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"Ctrl", "x":4, "y":3, "w":1.25}, {"label":"Win", "x":5.25, "y":3, "w":1.25}, {"label":"Alt", "x":6.5, "y":3, "w":1.25}, {"x":7.75, "y":3, "w":1.75}, {"x":9.5, "y":3}, {"x":10.5, "y":3, "w":2.25}, {"label":"Win", "x":12.75, "y":3, "w":1.25}, {"label":"\u2190", "x":14, "y":3}, {"label":"\u2193", "x":15, "y":3}, {"label":"\u2192", "x":16, "y":3}
+            ]
+        }
+    }
+}
diff --git a/keyboards/tkc/candybar/lefty/keymaps/default/keymap.c b/keyboards/tkc/candybar/lefty/keymaps/default/keymap.c
new file mode 100644
index 000000000..153fd99c5
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/keymaps/default/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT(
+  KC_P7  , KC_P8, KC_P9  , KC_PAST, KC_ESC , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_O   , KC_P   , KC_DEL , KC_BSPC , \
+  KC_P4  , KC_P5, KC_P6  , KC_PMNS, KC_TAB , KC_A   , KC_S   , KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_SCLN,          KC_ENT  , \
+  KC_P1  , KC_P2, KC_P3  , KC_PPLS, KC_LSFT,          KC_Z   , KC_X, KC_C   , KC_V  , KC_B, KC_N   , KC_M   , KC_COMM, KC_DOT , KC_UP   ,KC_RSFT , \
+  MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+  */
+  [_FL] = LAYOUT(
+  KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
+  KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
+  KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
+  KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
+};
diff --git a/keyboards/tkc/candybar/lefty/keymaps/via/keymap.c b/keyboards/tkc/candybar/lefty/keymaps/via/keymap.c
new file mode 100644
index 000000000..fd927195b
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/keymaps/via/keymap.c
@@ -0,0 +1,52 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+#define _AL 2
+#define _LL 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT(
+  KC_P7  , KC_P8, KC_P9  , KC_PAST, KC_ESC , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_O   , KC_P   , KC_DEL , KC_BSPC , \
+  KC_P4  , KC_P5, KC_P6  , KC_PMNS, KC_TAB , KC_A   , KC_S   , KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_SCLN,          KC_ENT  , \
+  KC_P1  , KC_P2, KC_P3  , KC_PPLS, KC_LSFT,          KC_Z   , KC_X, KC_C   , KC_V  , KC_B, KC_N   , KC_M   , KC_COMM, KC_DOT , KC_UP   ,KC_RSFT , \
+  MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+  */
+  [_FL] = LAYOUT(
+  KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
+  KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
+  KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
+  KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
+  
+  [_AL] = LAYOUT(
+  KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
+  KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
+  KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
+  KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
+  
+  [_LL] = LAYOUT(
+  KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
+  KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
+  KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
+  KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
+};
diff --git a/keyboards/tkc/candybar/lefty/keymaps/via/rules.mk b/keyboards/tkc/candybar/lefty/keymaps/via/rules.mk
new file mode 100644
index 000000000..036bd6d1c
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/tkc/candybar/lefty/lefty.c b/keyboards/tkc/candybar/lefty/lefty.c
new file mode 100644
index 000000000..920811b83
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/lefty.c
@@ -0,0 +1,21 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "lefty.h"
+
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
diff --git a/keyboards/tkc/candybar/lefty/lefty.h b/keyboards/tkc/candybar/lefty/lefty.h
new file mode 100644
index 000000000..07af4b31b
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/lefty.h
@@ -0,0 +1,31 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+
+#define LAYOUT( \
+    k0d, k0e, k0f, k0g, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+    k1d, k1e, k1f, k1g, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+    k2d, k2e, k2f, k2g, k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+    k3d, k3e, k3f, k3g, k30, k31, k32,           k35,      k37, k38, k39, k3a, k3b, k3c \
+) { \
+    { k00, k01  , k02, k03  , k04  , k05, k06  , k07, k08, k09, k0a, k0b  , k0c, k0d, k0e, k0f, k0g }  , \
+    { k10, k11  , k12, k13  , k14  , k15, k16  , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }  , \
+    { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
+    { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
+}
diff --git a/keyboards/tkc/candybar/lefty/readme.md b/keyboards/tkc/candybar/lefty/readme.md
new file mode 100644
index 000000000..75ca1cbd8
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/readme.md
@@ -0,0 +1,15 @@
+# The Key Company Candybar
+
+![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
+
+The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
+
+* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
+* Hardware Supported: TKC Candybar
+* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tkc/candybar/lefty:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tkc/candybar/lefty/rules.mk b/keyboards/tkc/candybar/lefty/rules.mk
new file mode 100644
index 000000000..1edad0835
--- /dev/null
+++ b/keyboards/tkc/candybar/lefty/rules.mk
@@ -0,0 +1,24 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+# EXTRAFLAGS+=-flto
+LTO_ENABLE = yes
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = lite  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no  # Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+SERIAL_LINK_ENABLE = no
+
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/tkc/candybar/mcuconf.h b/keyboards/tkc/candybar/mcuconf.h
new file mode 100644
index 000000000..faca3defd
--- /dev/null
+++ b/keyboards/tkc/candybar/mcuconf.h
@@ -0,0 +1,171 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/tkc/candybar/righty/config.h b/keyboards/tkc/candybar/righty/config.h
new file mode 100644
index 000000000..500453784
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/config.h
@@ -0,0 +1,115 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x544B //TK
+#define PRODUCT_ID      0x0002
+#define DEVICE_VER      0x0006
+#define MANUFACTURER    The Key Company
+#define PRODUCT         Candybar
+#define DESCRIPTION     A compact staggered 40% keyboard with attached numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 17
+#define DIODE_DIRECTION COL2ROW
+#define MATRIX_ROW_PINS { A8, A9, A10, A13 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 }
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
diff --git a/keyboards/tkc/candybar/righty/info.json b/keyboards/tkc/candybar/righty/info.json
new file mode 100644
index 000000000..81dc4f8ec
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/info.json
@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "TKC Candybar",
+    "url": "",
+    "maintainer": "terrymathews",
+    "width": 17,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+				{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0},
+				{"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1},
+				{"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"&uarr;", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2},
+				{"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"&larr;", "x":11, "y":3}, {"label":"&darr;", "x":12, "y":3}, {"label":"&rarr;", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}]
+        }
+    }
+}
diff --git a/keyboards/tkc/candybar/righty/keymaps/default/keymap.c b/keyboards/tkc/candybar/righty/keymaps/default/keymap.c
new file mode 100644
index 000000000..8f4cc08c7
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/keymaps/default/keymap.c
@@ -0,0 +1,38 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT(
+  KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \
+  KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \
+  KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT),
+
+  /* Keymap _FL: Function Layer
+   */
+[_FL] = LAYOUT(
+  RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
+  KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
+  KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
+};
diff --git a/keyboards/tkc/candybar/righty/keymaps/via/keymap.c b/keyboards/tkc/candybar/righty/keymaps/via/keymap.c
new file mode 100644
index 000000000..fb8ac93d4
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/keymaps/via/keymap.c
@@ -0,0 +1,52 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+#define _AL 2
+#define _LL 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT(
+  KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \
+  KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \
+  KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT),
+
+  /* Keymap _FL: Function Layer
+   */
+[_FL] = LAYOUT(
+  RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
+  KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
+  KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
+  
+  [_AL] = LAYOUT(
+  RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
+  KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
+  KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
+  
+  [_LL] = LAYOUT(
+  RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
+  KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
+  KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
+};
diff --git a/keyboards/tkc/candybar/righty/keymaps/via/rules.mk b/keyboards/tkc/candybar/righty/keymaps/via/rules.mk
new file mode 100644
index 000000000..036bd6d1c
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/tkc/candybar/righty/readme.md b/keyboards/tkc/candybar/righty/readme.md
new file mode 100644
index 000000000..4e2a0f847
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/readme.md
@@ -0,0 +1,15 @@
+# The Key Company Candybar
+
+![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
+
+The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
+
+* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
+* Hardware Supported: TKC Candybar
+* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tkc/candybar/righty:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tkc/candybar/righty/righty.c b/keyboards/tkc/candybar/righty/righty.c
new file mode 100644
index 000000000..c3b611574
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/righty.c
@@ -0,0 +1,17 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "righty.h"
diff --git a/keyboards/tkc/candybar/righty/righty.h b/keyboards/tkc/candybar/righty/righty.h
new file mode 100644
index 000000000..67e023883
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/righty.h
@@ -0,0 +1,30 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, k1d, k1e, k1f, k1g, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
+    k30, k31, k32,           k35,      k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \
+) { \
+    { k00, k01  , k02, k03  , k04  , k05, k06  , k07, k08, k09, k0a, k0b  , k0c, k0d, k0e, k0f, k0g }  , \
+    { k10, k11  , k12, k13  , k14  , k15, k16  , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }  , \
+    { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
+    { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
+}
diff --git a/keyboards/tkc/candybar/righty/rules.mk b/keyboards/tkc/candybar/righty/rules.mk
new file mode 100644
index 000000000..1edad0835
--- /dev/null
+++ b/keyboards/tkc/candybar/righty/rules.mk
@@ -0,0 +1,24 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+# EXTRAFLAGS+=-flto
+LTO_ENABLE = yes
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = lite  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no  # Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+SERIAL_LINK_ENABLE = no
+
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/tkc/m0lly/README.md b/keyboards/tkc/m0lly/README.md
new file mode 100644
index 000000000..9af80c7e9
--- /dev/null
+++ b/keyboards/tkc/m0lly/README.md
@@ -0,0 +1,17 @@
+The Key Company M0LLY
+
+[TKC M0LLY](https://cdn.shopify.com/s/files/1/1679/2319/files/Molly_Terminal_1024x1024.jpg?v=1529067702)
+
+
+The Key Company's M0LLY keyboard is inspired by the Apple Macintosh M0110A, and utilizes the AT90USB1286 microcontroller.
+
+Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)  
+Hardware Supported: TKC M0LLY  
+Hardware Availability: [TheKey.Company](https://thekey.company) 
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tkc/m0lly:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tkc/m0lly/config.h b/keyboards/tkc/m0lly/config.h
new file mode 100644
index 000000000..29bd8411e
--- /dev/null
+++ b/keyboards/tkc/m0lly/config.h
@@ -0,0 +1,183 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x544B // "TK"
+#define PRODUCT_ID      0x0004
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    The Key Company
+#define PRODUCT         M0lly
+#define DESCRIPTION     QMK keyboard firmware for M0lly
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+*/
+#define MATRIX_ROW_PINS { F2, F1, F0, E1, E0 }
+/* Column pin configuration
+ */
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define QMK_ESC_OUTPUT A0 // usually COL
+#define QMK_ESC_INPUT F4 // usually ROW
+#define QMK_LED D2 // NumLock on M0lly
+//#define QMK_SPEAKER C6
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
diff --git a/keyboards/tkc/m0lly/info.json b/keyboards/tkc/m0lly/info.json
new file mode 100644
index 000000000..f2ac456b1
--- /dev/null
+++ b/keyboards/tkc/m0lly/info.json
@@ -0,0 +1,97 @@
+{
+    "keyboard_name": "TKC M0LLY", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 19.5, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+				{"label":"~", "x":0, "y":0},
+				{"label":"!", "x":1, "y":0},
+				{"label":"@", "x":2, "y":0},
+				{"label":"#", "x":3, "y":0},
+				{"label":"$", "x":4, "y":0},
+				{"label":"%", "x":5, "y":0},
+				{"label":"^", "x":6, "y":0},
+				{"label":"&", "x":7, "y":0},
+				{"label":"*", "x":8, "y":0},
+				{"label":"(", "x":9, "y":0},
+				{"label":")", "x":10, "y":0},
+				{"label":"_", "x":11, "y":0},
+				{"label":"+", "x":12, "y":0},
+				{"label":"Bksp", "x":13, "y":0},
+				{"x":14, "y":0},
+				{"label":"Num", "x":15.5, "y":0},
+				{"label":"/", "x":16.5, "y":0},
+				{"label":"*", "x":17.5, "y":0},
+				{"label":"-", "x":18.5, "y":0},
+				{"label":"Tab", "x":0, "y":1, "w":1.5},
+				{"label":"Q", "x":1.5, "y":1},
+				{"label":"W", "x":2.5, "y":1},
+				{"label":"E", "x":3.5, "y":1},
+				{"label":"R", "x":4.5, "y":1},
+				{"label":"T", "x":5.5, "y":1},
+				{"label":"Y", "x":6.5, "y":1},
+				{"label":"U", "x":7.5, "y":1},
+				{"label":"I", "x":8.5, "y":1},
+				{"label":"O", "x":9.5, "y":1},
+				{"label":"P", "x":10.5, "y":1},
+				{"label":"{", "x":11.5, "y":1},
+				{"label":"}", "x":12.5, "y":1},
+				{"label":"|", "x":13.5, "y":1, "w":1.5},
+				{"label":"7", "x":15.5, "y":1},
+				{"label":"8", "x":16.5, "y":1},
+				{"label":"9", "x":17.5, "y":1},
+				{"x":18.5, "y":1},
+				{"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+				{"label":"A", "x":1.75, "y":2},
+				{"label":"S", "x":2.75, "y":2},
+				{"label":"D", "x":3.75, "y":2},
+				{"label":"F", "x":4.75, "y":2},
+				{"label":"G", "x":5.75, "y":2},
+				{"label":"H", "x":6.75, "y":2},
+				{"label":"J", "x":7.75, "y":2},
+				{"label":"K", "x":8.75, "y":2},
+				{"label":"L", "x":9.75, "y":2},
+				{"label":":", "x":10.75, "y":2},
+				{"label":"\"", "x":11.75, "y":2},
+				{"label":"ISO ~", "x":12.75, "y":2},
+				{"label":"Enter", "x":13.75, "y":2, "w":1.25},
+				{"label":"4", "x":15.5, "y":2},
+				{"label":"5", "x":16.5, "y":2},
+				{"label":"6", "x":17.5, "y":2},
+				{"label":"+", "x":18.5, "y":2},
+				{"label":"Shift", "x":0, "y":3, "w":1.25},
+				{"x":1.25, "y":3},
+				{"label":"Z", "x":2.25, "y":3},
+				{"label":"X", "x":3.25, "y":3},
+				{"label":"C", "x":4.25, "y":3},
+				{"label":"V", "x":5.25, "y":3},
+				{"label":"B", "x":6.25, "y":3},
+				{"label":"N", "x":7.25, "y":3},
+				{"label":"M", "x":8.25, "y":3},
+				{"label":"<", "x":9.25, "y":3},
+				{"label":">", "x":10.25, "y":3},
+				{"label":"?", "x":11.25, "y":3},
+				{"label":"Shift", "x":12.25, "y":3, "w":1.75},
+				{"x":14, "y":3},
+				{"label":"1", "x":15.5, "y":3},
+				{"label":"2", "x":16.5, "y":3},
+				{"label":"3", "x":17.5, "y":3},
+				{"x":18.5, "y":3},
+				{"label":"Ctrl", "x":0, "y":4, "w":1.25},
+				{"label":"Win", "x":1.25, "y":4, "w":1.25},
+				{"label":"Alt", "x":2.5, "y":4, "w":1.25},
+				{"x":3.75, "y":4, "w":6.25},
+				{"label":"Alt", "x":10, "y":4, "w":1.25},
+				{"label":"Win", "x":11.25, "y":4, "w":1.25},
+				{"label":"FN", "x":12.5, "y":4, "w":1.25},
+				{"label":"Ctrl", "x":13.75, "y":4, "w":1.25},
+				{"label":"0", "x":15.5, "y":4},
+				{"x":16.5, "y":4},
+				{"label":".", "x":17.5, "y":4},
+				{"label":"Ent", "x":18.5, "y":4}]
+        }
+    }
+}
diff --git a/keyboards/tkc/m0lly/keymaps/default/keymap.c b/keyboards/tkc/m0lly/keymaps/default/keymap.c
new file mode 100644
index 000000000..27e83cd21
--- /dev/null
+++ b/keyboards/tkc/m0lly/keymaps/default/keymap.c
@@ -0,0 +1,94 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * 
+   * ,-----------------------------------------------------------. .-------------------.
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  |    |
+   * |-----------------------------------------------------------| |--------------| +  |
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     | | 1  | 2  | 3  | Ent|
+   * |-----------------------------------------------------------| |--------------|    |
+   * |Ctrl|Gui |Alt |      Space           | Alt | Win |FN  |Ctr | |   0     | .  |    |
+   * `-----------------------------------------------------------' '-------------------'
+   */
+  [BASE] = LAYOUT_all(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, XXXXXXX,          KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, KC_RWIN, MO(FUNCTION), KC_RCTL,                   KC_P0,   XXXXXXX, KC_PDOT, KC_PENT  \
+  ),
+  /* Keymap FUNCTION: (Function Layer)
+   * 
+   * ,-----------------------------------------------------------. .-------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   | RESET | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |       |   |   |   |   |   |   |   |   |   |   |   |       | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |        |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp|   |          | |    |    |    |    |
+   * |-----------------------------------------------------------| |--------------|    |
+   * |    |    |    |                      |     |     |    |    | |         |    |    |
+   * `-----------------------------------------------------------' '-------------------'
+   */
+  [FUNCTION] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, XXXXXXX, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX,          _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                        _______, _______, MO(FUNCTION), _______,                  _______, XXXXXXX, _______, _______  \
+  ),
+};
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("M0lly\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+	// Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
\ No newline at end of file
diff --git a/keyboards/tkc/m0lly/keymaps/via/keymap.c b/keyboards/tkc/m0lly/keymaps/via/keymap.c
new file mode 100644
index 000000000..b72b8f035
--- /dev/null
+++ b/keyboards/tkc/m0lly/keymaps/via/keymap.c
@@ -0,0 +1,116 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+  ALTERNATE,
+  LAST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * 
+   * ,-----------------------------------------------------------. .-------------------.
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  |    |
+   * |-----------------------------------------------------------| |--------------| +  |
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     | | 1  | 2  | 3  | Ent|
+   * |-----------------------------------------------------------| |--------------|    |
+   * |Ctrl|Gui |Alt |      Space           | Alt | Win |FN  |Ctr | |   0     | .  |    |
+   * `-----------------------------------------------------------' '-------------------'
+   */
+  [BASE] = LAYOUT_all(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, XXXXXXX,          KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, KC_RWIN, MO(FUNCTION), KC_RCTL,                   KC_P0,   XXXXXXX, KC_PDOT, KC_PENT
+  ),
+  /* Keymap FUNCTION: (Function Layer)
+   * 
+   * ,-----------------------------------------------------------. .-------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   | RESET | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |       |   |   |   |   |   |   |   |   |   |   |   |       | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |        |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp|   |          | |    |    |    |    |
+   * |-----------------------------------------------------------| |--------------|    |
+   * |    |    |    |                      |     |     |    |    | |         |    |    |
+   * `-----------------------------------------------------------' '-------------------'
+   */
+  [FUNCTION] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, XXXXXXX,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______,
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX,          _______, _______, _______, XXXXXXX,
+    _______, _______, _______,                   _______,                        _______, _______, MO(FUNCTION), _______,                  _______, XXXXXXX, _______, _______
+  ),
+  [ALTERNATE] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, XXXXXXX,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______,
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX,          _______, _______, _______, XXXXXXX,
+    _______, _______, _______,                   _______,                        _______, _______, MO(FUNCTION), _______,                  _______, XXXXXXX, _______, _______
+  ),
+    [LAST] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, XXXXXXX,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______,
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, XXXXXXX,          _______, _______, _______, XXXXXXX,
+    _______, _______, _______,                   _______,                        _______, _______, MO(FUNCTION), _______,                  _______, XXXXXXX, _______, _______
+  ),
+};
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("M0lly\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+		case ALTERNATE:
+            oled_write_P(PSTR("Alternate\n"), false);
+            break;
+		case LAST:
+            oled_write_P(PSTR("Last\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+	// Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
diff --git a/keyboards/tkc/m0lly/keymaps/via/rules.mk b/keyboards/tkc/m0lly/keymaps/via/rules.mk
new file mode 100644
index 000000000..1e5b99807
--- /dev/null
+++ b/keyboards/tkc/m0lly/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/tkc/m0lly/m0lly.c b/keyboards/tkc/m0lly/m0lly.c
new file mode 100644
index 000000000..e47f9531e
--- /dev/null
+++ b/keyboards/tkc/m0lly/m0lly.c
@@ -0,0 +1,76 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "m0lly.h"
+#include "led.h"
+
+void keyboard_pre_init_kb(void) {
+  setPinInputHigh(D0);
+  setPinInputHigh(D1);
+
+  keyboard_pre_init_user();
+}
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_init_ports(void) {
+	DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT
+	DDRB |= (1<<7); // OUT
+	PORTB |= (1<<7);
+}
+
+void led_set_kb(uint8_t usb_led) {
+//    led_set_user(usb_led);
+	if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // Turn numlock on
+		PORTD |= (1<<2);
+    } else {
+        // Turn numlock off
+	    PORTD &= ~(1<<2);
+    }
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+		PORTD |= (1<<3);
+    } else {
+        // Turn capslock off
+		PORTD &= ~(1<<3);
+    }
+	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+        // Turn scrolllock on
+	    PORTD |= (1<<4);
+    } else {
+        // Turn scrolllock off
+		PORTD &= ~(1<<4);
+    }
+}
\ No newline at end of file
diff --git a/keyboards/tkc/m0lly/m0lly.h b/keyboards/tkc/m0lly/m0lly.h
new file mode 100644
index 000000000..0c62876ef
--- /dev/null
+++ b/keyboards/tkc/m0lly/m0lly.h
@@ -0,0 +1,32 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, K1G, K1H, K1I, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, K2G, K2H, K2I, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,    K3D,   K3F, K3G, K3H, K3I, \
+    K40, K41, K42,           K45,                        K49, K4B, K4C, K4D,   K4F, K4G, K4H, K4I  \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G, K0H, K0I }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO, K1F,   K1G, K1H, K1I }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO, K2F,   K2G, K2H, K2I }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F,   K3G, K3H, K3I }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, K45,   KC_NO, KC_NO, KC_NO, K49,   KC_NO,   K4B,   K4C,   K4D,   KC_NO,   K4F, K4G, K4H, K4I }  \
+}
diff --git a/keyboards/tkc/m0lly/rules.mk b/keyboards/tkc/m0lly/rules.mk
new file mode 100644
index 000000000..05e629075
--- /dev/null
+++ b/keyboards/tkc/m0lly/rules.mk
@@ -0,0 +1,32 @@
+# MCU name
+MCU = at90usb1286
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+OLED_DRIVER_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/README.md b/keyboards/tkc/tkc1800/README.md
new file mode 100644
index 000000000..5382b91b3
--- /dev/null
+++ b/keyboards/tkc/tkc1800/README.md
@@ -0,0 +1,17 @@
+The Key Company TKC1800
+
+[TKC1800 Image Gallery](https://imgur.com/a/Xlttp)
+
+
+The Key Company TKC1800 is a Cherry 1800 form factor replacement PCB utilizing the AT90USB1286 microcontroller.
+
+Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)  
+Hardware Supported: TKC1800 PCB  
+Hardware Availability: [TheKey.Company](https://thekey.company/collections/tkc-1800)  
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tkc/tkc1800:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tkc/tkc1800/config.h b/keyboards/tkc/tkc1800/config.h
new file mode 100644
index 000000000..9c35699c9
--- /dev/null
+++ b/keyboards/tkc/tkc1800/config.h
@@ -0,0 +1,183 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x544B // "TK"
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    The Key Company
+#define PRODUCT         TKC1800
+#define DESCRIPTION     QMK keyboard firmware for TKC1800
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 19
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+*/
+#define MATRIX_ROW_PINS { F4, F3, F2, F1, F0, E1, E0 }
+/* Column pin configuration
+ */
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define QMK_ESC_OUTPUT A0 // usually COL
+#define QMK_ESC_INPUT F4 // usually ROW
+#define QMK_LED D2 // NumLock on TKC1800
+//#define QMK_SPEAKER C6
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
diff --git a/keyboards/tkc/tkc1800/info.json b/keyboards/tkc/tkc1800/info.json
new file mode 100644
index 000000000..3e3ab1484
--- /dev/null
+++ b/keyboards/tkc/tkc1800/info.json
@@ -0,0 +1,121 @@
+{
+  "keyboard_name": "TKC1800",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 19.5,
+  "height": 7.25,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 107,
+      "layout": [
+        { "label": "Esc", "x": 0, "y": 0 },
+        { "label": "F1", "x": 1.25, "y": 0 },
+        { "label": "F2", "x": 2.25, "y": 0 },
+        { "label": "F3", "x": 3.25, "y": 0 },
+        { "label": "F4", "x": 4.25, "y": 0 },
+        { "label": "F5", "x": 5.5, "y": 0 },
+        { "label": "F6", "x": 6.5, "y": 0 },
+        { "label": "F7", "x": 7.5, "y": 0 },
+        { "label": "F8", "x": 8.5, "y": 0 },
+        { "label": "F9", "x": 9.75, "y": 0 },
+        { "label": "F10", "x": 10.75, "y": 0 },
+        { "label": "F11", "x": 11.75, "y": 0 },
+        { "label": "F12", "x": 12.75, "y": 0 },
+        { "label": "Insert", "x": 15.5, "y": 0 },
+        { "label": "Home", "x": 16.5, "y": 0 },
+        { "label": "Page Up", "x": 17.5, "y": 0 },
+        { "label": "Print Screen", "x": 18.5, "y": 0 },
+        { "label": "Delete", "x": 15.5, "y": 1 },
+        { "label": "End", "x": 16.5, "y": 1 },
+        { "label": "Page Down", "x": 17.5, "y": 1 },
+        { "label": "Scroll Lock", "x": 18.5, "y": 1 },
+        { "label": "`", "x": 0, "y": 2 },
+        { "label": "1", "x": 1, "y": 2 },
+        { "label": "2", "x": 2, "y": 2 },
+        { "label": "3", "x": 3, "y": 2 },
+        { "label": "4", "x": 4, "y": 2 },
+        { "label": "5", "x": 5, "y": 2 },
+        { "label": "6", "x": 6, "y": 2 },
+        { "label": "7", "x": 7, "y": 2 },
+        { "label": "8", "x": 8, "y": 2 },
+        { "label": "9", "x": 9, "y": 2 },
+        { "label": "0", "x": 10, "y": 2 },
+        { "label": "-", "x": 11, "y": 2 },
+        { "label": "=", "x": 12, "y": 2 },
+        { "label": "Backspace", "x": 13, "y": 2 },
+        { "label": "Backspace_Right", "x": 14, "y": 2 },
+        { "label": "Num Lock", "x": 15.5, "y": 2 },
+        { "label": "/", "x": 16.5, "y": 2 },
+        { "label": "*", "x": 17.5, "y": 2 },
+        { "label": "Pause", "x": 18.5, "y": 2 },
+        { "label": "Tab", "x": 0, "y": 3, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 3 },
+        { "label": "W", "x": 2.5, "y": 3 },
+        { "label": "E", "x": 3.5, "y": 3 },
+        { "label": "R", "x": 4.5, "y": 3 },
+        { "label": "T", "x": 5.5, "y": 3 },
+        { "label": "Y", "x": 6.5, "y": 3 },
+        { "label": "U", "x": 7.5, "y": 3 },
+        { "label": "I", "x": 8.5, "y": 3 },
+        { "label": "O", "x": 9.5, "y": 3 },
+        { "label": "P", "x": 10.5, "y": 3 },
+        { "label": "[", "x": 11.5, "y": 3 },
+        { "label": "]", "x": 12.5, "y": 3 },
+        { "label": "\\", "x": 13.5, "y": 3, "w": 1.5 },
+        { "label": "7", "x": 15.5, "y": 3 },
+        { "label": "8", "x": 16.5, "y": 3 },
+        { "label": "9", "x": 17.5, "y": 3 },
+        { "label": "-", "x": 18.5, "y": 3 },
+        { "label": "Caps Lock", "x": 0, "y": 4, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 4 },
+        { "label": "S", "x": 2.75, "y": 4 },
+        { "label": "D", "x": 3.75, "y": 4 },
+        { "label": "F", "x": 4.75, "y": 4 },
+        { "label": "G", "x": 5.75, "y": 4 },
+        { "label": "H", "x": 6.75, "y": 4 },
+        { "label": "J", "x": 7.75, "y": 4 },
+        { "label": "K", "x": 8.75, "y": 4 },
+        { "label": "L", "x": 9.75, "y": 4 },
+        { "label": ";", "x": 10.75, "y": 4 },
+        { "label": "'", "x": 11.75, "y": 4 },
+        { "label": "ISO Hash", "x": 12.75, "y": 4 },
+        { "label": "Enter", "x": 13.75, "y": 4, "w": 1.25 },
+        { "label": "4", "x": 15.5, "y": 4 },
+        { "label": "5", "x": 16.5, "y": 4 },
+        { "label": "6", "x": 17.5, "y": 4 },
+        { "label": "+", "x": 18.5, "y": 4 },
+        { "label": "Shift", "x": 0, "y": 5, "w": 1.25 },
+        { "label": "ISO Backslash", "x": 1.25, "y": 5 },
+        { "label": "Z", "x": 2.25, "y": 5 },
+        { "label": "X", "x": 3.25, "y": 5 },
+        { "label": "C", "x": 4.25, "y": 5 },
+        { "label": "V", "x": 5.25, "y": 5 },
+        { "label": "B", "x": 6.25, "y": 5 },
+        { "label": "N", "x": 7.25, "y": 5 },
+        { "label": "M", "x": 8.25, "y": 5 },
+        { "label": ",", "x": 9.25, "y": 5 },
+        { "label": ".", "x": 10.25, "y": 5 },
+        { "label": "/", "x": 11.25, "y": 5 },
+        { "label": "Shift", "x": 12.25, "y": 5, "w": 1.75 },
+        { "label": "Up", "x": 14.25, "y": 5.25 },
+        { "label": "1", "x": 15.5, "y": 5 },
+        { "label": "2", "x": 16.5, "y": 5 },
+        { "label": "3", "x": 17.5, "y": 5 },
+        { "label": "Enter_Top", "x": 18.5, "y": 5 },
+        { "label": "Ctrl", "x": 0, "y": 6, "w": 1.25 },
+        { "label": "GUI", "x": 1.25, "y": 6, "w": 1.25 },
+        { "label": "Alt", "x": 2.5, "y": 6, "w": 1.25 },
+        { "label": "Space", "x": 3.75, "y": 6, "w": 6.25 },
+        { "label": "Alt", "x": 10, "y": 6 },
+        { "label": "Fn", "x": 11, "y": 6 },
+        { "label": "Ctrl", "x": 12, "y": 6 },
+        { "label": "Left", "x": 13.25, "y": 6.25 },
+        { "label": "Down", "x": 14.25, "y": 6.25 },
+        { "label": "Right", "x": 15.25, "y": 6.25 },
+        { "label": "0", "x": 16.5, "y": 6 },
+        { "label": ".", "x": 17.5, "y": 6 },
+        { "label": "Enter", "x": 18.5, "y": 6 }
+      ]
+    }
+  }
+}
diff --git a/keyboards/tkc/tkc1800/keymaps/default/keymap.c b/keyboards/tkc/tkc1800/keymaps/default/keymap.c
new file mode 100644
index 000000000..4f4c7f8e9
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/default/keymap.c
@@ -0,0 +1,106 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl|Gui |Alt |      Space           |Alt |Fn |Ctr|Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [BASE] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, MO(FUNCTION), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+  /* Keymap FUNCTION: (Function Layer)
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |   |   |   |   |   | |   |   |   |   | |   |   |   |   |     |    |    |    |    |
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |    |    |    |    |
+   * ,-----------------------------------------------------------. |-------------------|
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   | RESET | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |       |   |   |   |   |   |   |   |   |   |   |   |       | |    |    |    |    |
+   * |-----------------------------------------------------------' |-------------------|
+   * |        |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp|   |       |    |    |    |    |    |
+   * |--------------------------------------------------------'----`--------------|    |
+   * |    |    |    |                      |    |   |   |     |    |    |    | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [FUNCTION] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+                                                                                                                                           _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______,      _______,     _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                            _______, _______, _______,      _______, _______, _______,     _______, _______, _______  \
+  ),
+};
+
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("TKC1800\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/keymaps/smt/keymap.c b/keyboards/tkc/tkc1800/keymaps/smt/keymap.c
new file mode 100644
index 000000000..9b6ad80d3
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/smt/keymap.c
@@ -0,0 +1,177 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+
+//Layers
+
+enum {
+  QWERTY = 0,
+  COLEMAK,
+  DVORAK,
+  FUNCTION,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap QWERTY: (Qwerty Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl|Gui |Alt |      Space           |Alt |Gui|Ctr|Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [QWERTY] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, MO(FUNCTION), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+  /* Keymap COLEMAK: (Colemak Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  F|  P|  G|  J|  L|  U|  Y|  ;|  [|  ]|  \  | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  R|  S|  T|  D|  H|  N|  E|  I|  O|  '|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  K|  M|  ,|  .|  /|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl|Gui |Alt |      Space           |Alt |Gui|Ctr|Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [COLEMAK] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    HPR_TAB, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    CTL_ESC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, MO(FUNCTION), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+  /* Keymap DVORAK: (Dvorak Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  [|  ]|  \| ~ | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  '|  ,|  .|  P|  Y|  F|  G|  C|  R|  L|  /|  =|  BS | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  O|  E|  U|  I|  D|  H|  T|  N|  S|  -|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  ;|  Q|  J|  K|  X|  B|  M|  W|  V|  Z|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl|Gui |Alt |      Space           |Alt |Gui|Ctr|Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [DVORAK] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV,  KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    HPR_TAB, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    CTL_ESC, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, MO(FUNCTION), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+  [FUNCTION] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    _______, _______, _______, _______, _______, _______, _______, QWERTY,  COLEMAK, DVORAK,  _______, _______, _______, _______,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, _______, KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(DVORAK);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("TKC1800\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case QWERTY:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+		case COLEMAK:
+            oled_write_P(PSTR("Colemak\n"), false);
+            break;
+		case DVORAK:
+            oled_write_P(PSTR("Dvorak\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/keymaps/via/keymap.c b/keyboards/tkc/tkc1800/keymaps/via/keymap.c
new file mode 100644
index 000000000..55c2874c6
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/via/keymap.c
@@ -0,0 +1,130 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+  ALTERNATE,
+  LAST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl|Gui |Alt |      Space           |Alt |Fn |Ctr|Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [BASE] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                        KC_RALT, MO(FUNCTION), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+  /* Keymap FUNCTION: (Function Layer)
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |   |   |   |   |   | |   |   |   |   | |   |   |   |   |     |    |    |    |    |
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |    |    |    |    |
+   * ,-----------------------------------------------------------. |-------------------|
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   | RESET | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     | |    |    |    |    |
+   * |-----------------------------------------------------------| |-------------------|
+   * |       |   |   |   |   |   |   |   |   |   |   |   |       | |    |    |    |    |
+   * |-----------------------------------------------------------' |-------------------|
+   * |        |Tog|Mod|Hu+|Hu-|Sa+|Sa-|Va+|Va-|Stp|   |       |    |    |    |    |    |
+   * |--------------------------------------------------------'----`--------------|    |
+   * |    |    |    |                      |    |   |   |     |    |    |    | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [FUNCTION] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+                                                                                                                                           _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______,      _______,     _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                            _______, _______, _______,      _______, _______, _______,     _______, _______, _______  \
+  ),
+  [ALTERNATE] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+                                                                                                                                           _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______,      _______,     _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                            _______, _______, _______,      _______, _______, _______,     _______, _______, _______  \
+  ),
+    [LAST] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+                                                                                                                                           _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______,      _______,     _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                            _______, _______, _______,      _______, _______, _______,     _______, _______, _______  \
+  ),
+};
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("TKC1800\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+		case ALTERNATE:
+            oled_write_P(PSTR("Alternate\n"), false);
+            break;
+		case LAST:
+            oled_write_P(PSTR("Last\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/keymaps/via/rules.mk b/keyboards/tkc/tkc1800/keymaps/via/rules.mk
new file mode 100644
index 000000000..1e5b99807
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c b/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c
new file mode 100644
index 000000000..3c65b61d1
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c
@@ -0,0 +1,88 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl | Alt |          Space           | Fn  |Ctrl |Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+  [BASE] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                           KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL, KC_LALT, XXXXXXX,                   KC_SPC,                             XXXXXXX, MO(1),   KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+  ),
+  [FUNCTION] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+                                                                                                                                           _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______,      _______,     _______, _______, _______, XXXXXXX, \
+    _______, _______, XXXXXXX,                   _______,                            XXXXXXX, _______, _______,      _______, _______, _______,     _______, _______, _______  \
+  ),
+};
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("TKC1800\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c b/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c
new file mode 100644
index 000000000..bbffc2d20
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c
@@ -0,0 +1,88 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+	BASE = 0,
+	FUNCTION,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------------------------------------------.     ,-------------------.
+   * |Esc| F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|     |Ins |Home|PgUp|PrSc|
+   * `-------------------------------------------------------'     |-------------------|
+   *                                                               |Del |End |PgDn|ScrL|
+   * ,-----------------------------------------------------------. |-------------------|
+   * | ~ | 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NumL| /  | *  |Paus|
+   * |-----------------------------------------------------------| |-------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | | 7  | 8  | 9  | -  |
+   * |-----------------------------------------------------------| |-------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return | | 4  | 5  | 6  | +  |
+   * |-----------------------------------------------------------' |-------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift  | Up | 1  | 2  | 3  | Ent|
+   * |--------------------------------------------------------'----`--------------|    |
+   * |Ctrl|Gui |Alt |      Space           |Alt |Gui|Ctr|Left |Down|Rght| 0  | .  |    |
+   * `---------------------------------------------------------------------------------'
+   */
+	[BASE] = LAYOUT(
+    KC_ESC,         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, \
+                                                                                                                                                  KC_DEL,  KC_END,  KC_PGDN, KC_SLCK, \
+    KC_GRV,         KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, \
+    KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+    LCTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_LSFT,        XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,      KC_UP,       KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+    KC_LCTL,        KC_LALT, KC_LGUI,                   KC_SPC,                        KC_RALT, MO(FUNCTION), KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_PDOT, KC_PENT  \
+	),
+	[FUNCTION] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
+                                                                                                                                           _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   XXXXXXX, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______,          _______, _______, _______, _______, \
+    _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______,      _______,     _______, _______, _______, XXXXXXX, \
+    _______, _______, _______,                   _______,                            _______, _______, _______,      _______, _______, _______,     _______, _______, _______  \
+	),
+};
+
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("TKC1800\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/keymaps/yanfali/rules.mk b/keyboards/tkc/tkc1800/keymaps/yanfali/rules.mk
new file mode 100644
index 000000000..b595964f7
--- /dev/null
+++ b/keyboards/tkc/tkc1800/keymaps/yanfali/rules.mk
@@ -0,0 +1 @@
+OLED_DRIVER_ENABLE = no
diff --git a/keyboards/tkc/tkc1800/rules.mk b/keyboards/tkc/tkc1800/rules.mk
new file mode 100644
index 000000000..fa90e9980
--- /dev/null
+++ b/keyboards/tkc/tkc1800/rules.mk
@@ -0,0 +1,33 @@
+# MCU name
+MCU = at90usb1286
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+OLED_DRIVER_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/tkc1800.c b/keyboards/tkc/tkc1800/tkc1800.c
new file mode 100644
index 000000000..4232c97d5
--- /dev/null
+++ b/keyboards/tkc/tkc1800/tkc1800.c
@@ -0,0 +1,76 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "tkc1800.h"
+#include "led.h"
+
+void keyboard_pre_init_kb(void) {
+  setPinInputHigh(D0);
+  setPinInputHigh(D1);
+
+  keyboard_pre_init_user();
+}
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_init_ports(void) {
+	DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT
+	DDRB |= (1<<7); // OUT
+	PORTB |= (1<<7);
+}
+
+void led_set_kb(uint8_t usb_led) {
+//    led_set_user(usb_led);
+	if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // Turn numlock on
+		PORTD |= (1<<2);
+    } else {
+        // Turn numlock off
+	    PORTD &= ~(1<<2);
+    }
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+		PORTD |= (1<<3);
+    } else {
+        // Turn capslock off
+		PORTD &= ~(1<<3);
+    }
+	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+        // Turn scrolllock on
+	    PORTD |= (1<<4);
+    } else {
+        // Turn scrolllock off
+		PORTD &= ~(1<<4);
+    }
+}
\ No newline at end of file
diff --git a/keyboards/tkc/tkc1800/tkc1800.h b/keyboards/tkc/tkc1800/tkc1800.h
new file mode 100644
index 000000000..4d1686cf1
--- /dev/null
+++ b/keyboards/tkc/tkc1800/tkc1800.h
@@ -0,0 +1,36 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00,      K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0F, K0G, K0H, K0I, \
+                                                                               K1F, K1G, K1H, K1I, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3F, K3G, K3H, K3I, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,      K4F, K4G, K4H, K4I, \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C,    K5D,   K5F, K5G, K5H, K5I, \
+    K60, K61, K62,           K65,                K69, K6A, K6B,    K6C, K6D, K6E,   K6G, K6H, K6I  \
+) { \
+    { K00,   KC_NO, K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   KC_NO, K0F,   K0G, K0H, K0I }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K1F,   K1G, K1H, K1I }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E,   K2F,   K2G, K2H, K2I }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   KC_NO, K3F,   K3G, K3H, K3I }, \
+    { K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A,   K4B,   K4C,   K4D,   KC_NO, K4F,   K4G, K4H, K4I }, \
+    { K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58,   K59,   K5A,   K5B,   K5C,   K5D,   KC_NO, K5F,   K5G, K5H, K5I }, \
+    { K60,   K61,   K62,   KC_NO, KC_NO, K65,   KC_NO, KC_NO, KC_NO, K69,   K6A,   K6B,   K6C,   K6D,   K6E,   KC_NO, K6G, K6H, K6I }  \
+}