Refactoring wilba.tech PCBs, updating Rama Works U80-A (#6272)

* Added WT65-B, WT75-B, minor fixes

* Update keyboards/wilba_tech/wt65_b/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/wilba_tech/wt65_b/readme.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/wilba_tech/wt75_b/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Change DEBOUNCING_DELAY to DEBOUNCE

* Change DEBOUNCING_DELAY to DEBOUNCE

* Move Zeal60/Zeal65 files to keyboards/wilba_tech

* Change DEBOUNCING_DELAY to DEBOUNCE

* Refactoring zeal60 code to wilba_tech

* Moved Rama Works PCBs to wilba_tech

* Rename Rama Works files

* Cleanup info.json

* Cleanup readme.md

* Cleanup USB device strings

* U80-A RGB matrix, IS31FL3731 driver changes

* Fixed #include from keyboards/zeal60

1 files changed, 80 insertions, 0 deletions

diff --git a/keyboards/wilba_tech/rama_works_m60_a/rules.mk b/keyboards/wilba_tech/rama_works_m60_a/rules.mk
new file mode 100644
index 000000000..3b2287333
--- /dev/null
+++ b/keyboards/wilba_tech/rama_works_m60_a/rules.mk
@@ -0,0 +1,80 @@
+
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
+LAYOUTS = 60_hhkb