Add support for YMD75 rev 2 (#8853)

14 files changed, 208 insertions, 118 deletions

diff --git a/keyboards/ymd75/README.md b/keyboards/ymd75/README.md
index 9a618c594..7c4779c9f 100644
--- a/keyboards/ymd75/README.md
+++ b/keyboards/ymd75/README.md
@@ -1,19 +1,19 @@
 # YMD75 / MT84
 
-75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides.
+75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
 
 * Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
-* Hardware Supported: YMD75/MT84 with the ATmega32a chip.
+* Hardware Supported: YMD75/MT84 (rev1 and rev2) with the ATmega32a chip.
 * Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ymd75:default
+    make ymd75/rev1:default
 
 Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
 
-    make ymd75:default:flash
+    make ymd75/rev1:default:flash
 
-**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard.
+**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding `L_CTRL` while plugging in the keyboard.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ymd75/config.h b/keyboards/ymd75/config.h
index 8aa2bba41..0ea23bc46 100644
--- a/keyboards/ymd75/config.h
+++ b/keyboards/ymd75/config.h
@@ -24,16 +24,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
 #define DEVICE_VER      0x0200
+
 #define MANUFACTURER    YMDK
 #define PRODUCT         YMD75 / MT84
 #define DESCRIPTION     75% Keyboard
 
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
-#define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 12
diff --git a/keyboards/ymd75/keymaps/default/keymap.c b/keyboards/ymd75/keymaps/default/keymap.c
index 17c5244bd..2b6412468 100644
--- a/keyboards/ymd75/keymaps/default/keymap.c
+++ b/keyboards/ymd75/keymaps/default/keymap.c
@@ -82,12 +82,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     if (record->event.pressed) {
         switch(keycode) {
             case P_MACRO:
-                SEND_STRING(SS_DOWN(X_LALT));
-                SEND_STRING(SS_TAP(X_KP_1));
-                SEND_STRING(SS_TAP(X_KP_5));
-                SEND_STRING(SS_TAP(X_KP_6));
-                SEND_STRING(SS_UP(X_LALT));
-                return false; break;
+                register_code(KC_LALT);
+                tap_code(KC_KP_1);
+                tap_code(KC_KP_5);
+                tap_code(KC_KP_6);
+                unregister_code(KC_LALT);
+                return false;
         }
     }
     return true;
diff --git a/keyboards/ymd75/rev1/config.h b/keyboards/ymd75/rev1/config.h
new file mode 100644
index 000000000..e9009ee0e
--- /dev/null
+++ b/keyboards/ymd75/rev1/config.h
@@ -0,0 +1,27 @@
+/*
+Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
+Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
+#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/ymd75/rev1/rev1.c b/keyboards/ymd75/rev1/rev1.c
new file mode 100644
index 000000000..0870a6cc0
--- /dev/null
+++ b/keyboards/ymd75/rev1/rev1.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ymd75.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D1);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, led_state.caps_lock);
+    }
+    return true;
+}
diff --git a/keyboards/ymd75/rev1/rev1.h b/keyboards/ymd75/rev1/rev1.h
new file mode 100644
index 000000000..0a426ffa5
--- /dev/null
+++ b/keyboards/ymd75/rev1/rev1.h
@@ -0,0 +1,39 @@
+/*
+Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
+Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
+ 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
+K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \
+K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \
+K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2,           KE0, \
+K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,           K86, K77, \
+K00, K10, K20,           K56,                     K57, KB0, KC0, K96, K76, K66  \
+){ \
+{ K00, K10,   K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0,   KD0,   KC_NO }, \
+{ K01, K11,   K21, K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+{ K02, K12,   K22, K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2, KC_NO, KD2,   KE2   }, \
+{ K03, K13,   K23, K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
+{ K04, K14,   K24, K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4, KC4,   KC_NO, KE4   }, \
+{ K05, KC_NO, K25, K35,   K45,   K55,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5,   KD5,   KE5   }, \
+{ K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+{ K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KE0,   KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
diff --git a/keyboards/ymd75/rev1/rules.mk b/keyboards/ymd75/rev1/rules.mk
new file mode 100644
index 000000000..66ffbb499
--- /dev/null
+++ b/keyboards/ymd75/rev1/rules.mk
@@ -0,0 +1,15 @@
+# build options
+BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = i2c
+NKRO_ENABLE = no
+# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+
+KEY_LOCK_ENABLE = yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/ymd75/rev2/config.h b/keyboards/ymd75/rev2/config.h
new file mode 100644
index 000000000..9718b19dd
--- /dev/null
+++ b/keyboards/ymd75/rev2/config.h
@@ -0,0 +1,8 @@
+#pragma once
+
+/* matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 15
+#define MATRIX_ROW_PINS { B7, B6, B5, B4, B3, B0 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
+#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/ymd75/rev2/rev2.c b/keyboards/ymd75/rev2/rev2.c
new file mode 100644
index 000000000..0870a6cc0
--- /dev/null
+++ b/keyboards/ymd75/rev2/rev2.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ymd75.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D1);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, led_state.caps_lock);
+    }
+    return true;
+}
diff --git a/keyboards/ymd75/rev2/rev2.h b/keyboards/ymd75/rev2/rev2.h
new file mode 100644
index 000000000..b2dd7b8e1
--- /dev/null
+++ b/keyboards/ymd75/rev2/rev2.h
@@ -0,0 +1,18 @@
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K514, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K513, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       K314, \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,       K413, K414, \
+	K500, K501, K502,                   K505,                   K506, K507, K508, K509, K510, K511  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  K414 }, \
+	{ K500,  K501,  K502,  KC_NO, KC_NO, K505,  K506,  K507,  K508,  K509,  K510,  K511,  KC_NO, K513,  K514 }  \
+}
diff --git a/keyboards/ymd75/rev2/rules.mk b/keyboards/ymd75/rev2/rules.mk
new file mode 100644
index 000000000..66ffbb499
--- /dev/null
+++ b/keyboards/ymd75/rev2/rules.mk
@@ -0,0 +1,15 @@
+# build options
+BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = i2c
+NKRO_ENABLE = no
+# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+
+KEY_LOCK_ENABLE = yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/ymd75/rules.mk b/keyboards/ymd75/rules.mk
index 9d584b2b4..437f9f4a5 100644
--- a/keyboards/ymd75/rules.mk
+++ b/keyboards/ymd75/rules.mk
@@ -11,20 +11,4 @@ MCU = atmega32a
 #   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
-# build options
-BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = no
-COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = yes
-RGBLIGHT_ENABLE = yes
-WS2812_DRIVER = i2c
-NKRO_ENABLE = no
-# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-
-DISABLE_WS2812 = no
-
-KEY_LOCK_ENABLE = yes
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+DEFAULT_FOLDER = ymd75/rev1
diff --git a/keyboards/ymd75/ymd75.c b/keyboards/ymd75/ymd75.c
index 0870a6cc0..2fca021f7 100644
--- a/keyboards/ymd75/ymd75.c
+++ b/keyboards/ymd75/ymd75.c
@@ -1,34 +1 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
 #include "ymd75.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}
diff --git a/keyboards/ymd75/ymd75.h b/keyboards/ymd75/ymd75.h
index 0c9fff58c..afeb09567 100644
--- a/keyboards/ymd75/ymd75.h
+++ b/keyboards/ymd75/ymd75.h
@@ -1,55 +1,9 @@
-/*
-Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
-Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
- 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
+#pragma once
 
 #include "quantum.h"
-#include "quantum_keycodes.h"
-#include "keycode.h"
-#include "action.h"
-
-#define LAYOUT( \
-K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
-K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \
-K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \
-K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2,           KE0, \
-K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,           K86, K77, \
-K00, K10, K20,           K56,                     K57, KB0, KC0, K96, K76, K66  \
-){ \
-{ K00, K10,   K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0,   KD0,   KC_NO }, \
-{ K01, K11,   K21, K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
-{ K02, K12,   K22, K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2, KC_NO, KD2,   KE2   }, \
-{ K03, K13,   K23, K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
-{ K04, K14,   K24, K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4, KC4,   KC_NO, KE4   }, \
-{ K05, KC_NO, K25, K35,   K45,   K55,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5,   KD5,   KE5   }, \
-{ K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
-{ K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KE0,   KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
-}
 
+#if defined(KEYBOARD_ymd75_rev1)
+    #include "rev1.h"
+#elif defined(KEYBOARD_ymd75_rev2)
+    #include "rev2.h"
 #endif
-
-
-
-
-
-
-
-
-