[Keyboard] Create RGBKB Folder (#5858)

* Move Sol, Zen, & Zygomorph keyboards to RGBKB folder

* Updated default keymaps

* Fixing more areas due too folder moves

* Fixing Zen layer numbers

* Fixing zygomorph layer comments

* Fixing Colmak comments

* Fixing Sol Colmak readme

* Macro alignment

* Zen rev2 configuration json

* Fixing sol ifdef

* Fixing Sol info.json

1 files changed, 0 insertions, 27 deletions

diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md
deleted file mode 100644
index 7ca7c69fe..000000000
--- a/keyboards/zen/readme.md
+++ /dev/null
@@ -1,27 +0,0 @@
-# Zen Keyboard
-
-A split ergo keyboard with a few goals in mind:
-
-- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick *including switches and caps* when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps.
-- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
-- Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright
-- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
-- Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the [QMK Proton-C](https://olkb.com/parts/qmk-proton-c) and the [Keeb.io Elite-C](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4)
-
-Keyboard Maintainer: [Legonut](https://github.com/Legonut)
-Hardware Supported: Zen rev1, Zen rev2
-Hardware Availability: [RGBKB.net](https://www.rgbkb.net/)
-
-A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://rgbkb.gitbook.io/sol-build-guide/zygomorph-build-guide/untitled).
-
-Make example for this keyboard (after setting up your build environment):
-
-    make zen/rev2:default
-
-To build for a Proton-C:
-
-    make zen/rev2:default CTPC=yes
-
-**Note:** The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes.
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.