just saving

10 files changed, 54 insertions, 232 deletions

diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile
index 57b2ef62e..4e2a6f00f 100644
--- a/keyboards/maxipad/Makefile
+++ b/keyboards/maxipad/Makefile
@@ -1,3 +1,3 @@
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h
index fbe64a5b0..a056e4963 100644
--- a/keyboards/maxipad/config.h
+++ b/keyboards/maxipad/config.h
@@ -24,124 +24,49 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Wootpatoot
+#define MANUFACTURER    wootpatoot
 #define PRODUCT         maxipad
 #define DESCRIPTION     A custom keyboard
 
-
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 6
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 }
-#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 }
-#define UNUSED_PINS
+// Planck PCB default pin-out
+// Change this to how you wired your keyboard
+// COLS: Left to right, ROWS: Top to bottom
+#ifdef USE_PRO_MICRO
+	#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
+	#define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 }
+	#define UNUSED_PINS
+ #else
+ 	#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 }
+	#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 }
+	#define UNUSED_PINS
+ #endif
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
+/* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
+/* key combination for command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/maxipad/keymaps/default/Makefile b/keyboards/maxipad/keymaps/default/Makefile
deleted file mode 100644
index f4671a9d1..000000000
--- a/keyboards/maxipad/keymaps/default/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/maxipad/keymaps/default/config.h b/keyboards/maxipad/keymaps/default/config.h
deleted file mode 100644
index df06a2620..000000000
--- a/keyboards/maxipad/keymaps/default/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c
index 43ace3241..227cef7d8 100644
--- a/keyboards/maxipad/keymaps/default/keymap.c
+++ b/keyboards/maxipad/keymaps/default/keymap.c
@@ -1,5 +1,5 @@
 #include "maxipad.h"
-
+ 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = KEYMAP( /* Base */
   KC_ESC,  KC_1,    KC_2,  KC_3,  KC_4,  KC_5, \
@@ -13,42 +13,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_SPC   \
 ),
 };
-
+ 
 const uint16_t PROGMEM fn_actions[] = {
-
 };
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+ 
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
 {
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
     return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
\ No newline at end of file
+};
\ No newline at end of file
diff --git a/keyboards/maxipad/keymaps/default/readme.md b/keyboards/maxipad/keymaps/default/readme.md
deleted file mode 100644
index a6c0d4a3f..000000000
--- a/keyboards/maxipad/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for maxipad
\ No newline at end of file
diff --git a/keyboards/maxipad/maxipad.c b/keyboards/maxipad/maxipad.c
index 879ae86a7..a193b112b 100644
--- a/keyboards/maxipad/maxipad.c
+++ b/keyboards/maxipad/maxipad.c
@@ -1,28 +1 @@
-#include "maxipad.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
+#include "maxipad.h"
\ No newline at end of file
diff --git a/keyboards/maxipad/maxipad.h b/keyboards/maxipad/maxipad.h
index eee1309dd..4d8c6428d 100644
--- a/keyboards/maxipad/maxipad.h
+++ b/keyboards/maxipad/maxipad.h
@@ -8,18 +8,18 @@
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
 #define KEYMAP( \
-     k00, k01, k02, k03, k04, k05, \
-     k10, k11, k12, k13, k14, k15, \
-     k20, k21, k22, k23, k24, k25, \
-     k30, k31, k32, k33, k34, k35, \
-     k40, k41, k42, k43, k44, k45 \
+    k00, k01, k02, k03, k04, k05, \
+    k10, k11, k12, k13, k14, k15, \
+    k20, k21, k22, k23, k24, k25, \
+    k30, k31, k32, k33, k34, k35, \
+    k40, k41, k42, k43, k44, k45 \
 ) \
 { \
     { k00, k01, k02, k03, k04, k05 }, \
     { k10, k11, k12, k13, k14, k15 }, \
     { k20, k21, k22, k23, k24, k25 }, \
     { k30, k31, k32, k33, k34, k35 }, \
-    { k40, k41, k42, k43, k44, k45} \
+    { k40, k41, k42, k43, k44, k45 } \
 }
 
 #endif
diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md
index 1971ce1f3..4e1702c5a 100644
--- a/keyboards/maxipad/readme.md
+++ b/keyboards/maxipad/readme.md
@@ -1,46 +1,27 @@
-maxipad keyboard firmware
+Maxipad keyboard firmware
 ======================
 
 ## Quantum MK Firmware
 
-<<<<<<< HEAD
-For the full Quantum feature list, see [the parent readme](/).
-=======
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
 
 ## Building
 
+If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile
+
 Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
 
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-
-<<<<<<< HEAD
 To build with the default keymap, simply run `make default`.
-=======
-To build with the default keymap, simply run `make`.
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 
 ### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-<<<<<<< HEAD
 To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
 ```
 $ make [default|jack|<name>]
 ```
-
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
-=======
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
-
-```
-$ make keymap=[default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file
diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk
index 55898147d..e6e5923f1 100644
--- a/keyboards/maxipad/rules.mk
+++ b/keyboards/maxipad/rules.mk
@@ -1,3 +1,5 @@
+
+
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -49,19 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 
 
 # Build Options
-#   change yes to no to disable
+#   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES 		# MIDI controls
+# UNICODE_ENABLE ?= YES 		# Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+USE_PRO_MICRO ?= yes
\ No newline at end of file