[Keymap] Sol rework (#7317)

* Added WOW layer

* Initial commit for this branch. Still a work in progress.

* Added Rorschach keyboard layout.

* Simplified keymap

Removed the media layer to help simplify things. Also corrected some
keymap mistakes in the Qwerty and Colemak layers.

* Added ErgoTravel keymap.

* reverted to previous layout.

* Added Sol keyboard layout.

* Minor changes to keymap.

* more changes

* Added sol graphic by Kagerufu and Cardiactuna

* Added colemak layer because I can.

* more changes to sol layout

* Streamlined Sol layout

* minor tweaks to sol layout

* further revisions to sol keymap.

* Removing deprecated #include statements from my keymaps

* Standardizing keymap `include` lines.

* Minor change to keymap.

Swapped ESC with GRV on all alpha layers.

* Tweaks to Atreus62 Keymap

Added a layer for FPS RPG Loot Shooters.

* Fixed readme.md for Atreus keymap.

Replaced "Keymap" with "Layer" in illustrations for continuity's sake

* More readme.md clean-up

More clarification in the Atreus readme file.

* Next verse, same as the first.

* Changes to Sol layout

Bringing my Sol layout more in line with my other Orthos.

* Fixed keymap GUI.

Replaced left-hand "RGUI" with "LGUI" on all layers as it should be.

* Added ALPS64 keymap

* Formatting corrections

* fixes to config.h and keymap.c

* Fixed errors

This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h
and removes an stupid comma at the end of each LAYOUT stanza in
keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me.

* Fixed orthodox keymap config.h file

I hope this one fixes the problem. *sigh*

* Making suggested changes for PR#6192

Thanks to noroadsleft, fauxpark, and drashna. Still have
more work to do, but at least these suggestions have been applied.

* Fixing build errors

Travis has shown me the error of my ways...

* More fixes and corrections

Those pesky semicolons...

* More Fixes.

* Removing unneeded code snippet.

* fixed omitted semicolons

* Code updates to my keymaps

Updating the code for my Iris, Atreus62, and Atreus keymaps.

* Fixed Atreus62 Keymap

I forgot to add in the aliases for LOWER, RAISE, and ADJUST.

* Added userspace

Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro

* Fixing code that disables LEDs on ProMicros
Also tidied up my ErgoTravel keymap.

* Moving userspace to new branch

Moving my userspace to a new branch for the sake of keeping things
clean on the master branch.

* Added F13-F15 to Atreus62 Layout.

* Update readme.md.

* Updated Phantom keymap to current keymap standards

* Phantom keymap updates

Further updates - tidying and removing cruft.
Thank you zvecr on Discord for the help!

* Standards Updates

Bringing my Kinesis keymap up to current code standards

* Adding a readme

* Bring GH60 code to standard

* Utilizing layouts for 60_ansi and tkl_ansi

Moving my GH60 and Phantom keymaps into layouts/community/

* Alps64 layout removal

Removing my Alps64 keymap now that I've setup my 60_ansi layout.

* Moved Clueboard layout to community/66_ansi.

* Additions to 66_ansi config.h

* Bringing keymaps up to standard.

* More updates to keymaps.

* Syntax updates

* Revert "Syntax updates"

This reverts commit a892b2d9fcc0d4ba8fc22d676d5414120cc2c183.

* Moved WIP keymaps

Moved my WIP keymaps to my wip_keymaps branch to keep my master clean

* Updates requested by noroadsleft

* more changes per noroadsleft

More fixes as requested by noroadsleft. Further tidy-up and
standardization of my keymap code.

* Reworked Sol Keymap

Reworking the Sol keymap to bring it more or less up to current
standards and to accurately depict the correct layer on the OLED
display.

* Final tweaks to sol keymap

... for now.

2 files changed, 225 insertions, 191 deletions

diff --git a/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c b/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c
index f5cf9ed3c..e38663dbb 100644
--- a/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c
+++ b/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c
@@ -1,13 +1,9 @@
 #include QMK_KEYBOARD_H
+
 #ifdef PROTOCOL_LUFA
 #include "lufa.h"
 #include "split_util.h"
 #endif
-#ifdef SSD1306OLED
-  #include "common/ssd1306.h"
-#endif
-
-extern keymap_config_t keymap_config;
 
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
@@ -16,10 +12,6 @@ extern rgblight_config_t rgblight_config;
 
 extern uint8_t is_master;
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
 enum layer_number {
     _DVORAK = 0,
     _DESTINY,
@@ -38,13 +30,14 @@ enum custom_keycodes {
   LOWER,
   RAISE,
   ADJUST,
-  BACKLIT,
-  RGBRST
+  RGBRST,
+  RGB_MENU
 };
 
-enum macro_keycodes {
-  KC_SAMPLEMACRO,
-};
+// Aliases to make the keymap clearer.
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_DVORAK] = LAYOUT( \
@@ -53,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_RCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    XXXXXXX,  XXXXXXX, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
       KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    XXXXXXX,  XXXXXXX, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT, \
       KC_GRV,  KC_LGUI, KC_LEFT, KC_RGHT, LOWER,   KC_LCTL, KC_LALT,  KC_RALT, KC_RCTL, RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL, \
-                                                   KC_BSPC, KC_RGUI,  KC_ENT,  KC_SPC \
+                                                   KC_BSPC, KC_LGUI,  KC_ENT,  KC_SPC \
 
   ),
 
@@ -63,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_RCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    XXXXXXX,  XXXXXXX, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
       KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    XXXXXXX,  XXXXXXX, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT, \
       KC_GRV,  KC_LGUI, KC_LEFT, KC_RGHT, LOWER,   KC_LCTL, KC_LALT,  KC_RALT, KC_RCTL, RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL, \
-                                                   KC_BSPC, KC_RGUI,  KC_ENT,  KC_SPC \
+                                                   KC_BSPC, KC_DEL,   KC_ENT,  KC_SPC \
 
   ),
   
@@ -73,7 +66,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_RCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    XXXXXXX,  XXXXXXX, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
       KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    XXXXXXX,  XXXXXXX, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
       KC_GRV,  KC_LGUI, KC_LEFT, KC_RGHT, LOWER,   KC_LCTL, KC_LALT,  KC_RALT, KC_RCTL, RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL, \
-                                                   KC_BSPC, KC_RGUI,  KC_ENT,  KC_SPC \
+                                                   KC_BSPC, KC_LGUI,  KC_ENT,  KC_SPC \
   ),
 
   [_COLEMAK] = LAYOUT( \
@@ -82,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_RCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_G,    XXXXXXX,  XXXXXXX, KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
       KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,    XXXXXXX,  XXXXXXX, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
       KC_GRV,  KC_LGUI, KC_LEFT, KC_RGHT, LOWER,   KC_LCTL, KC_LALT,  KC_RALT, KC_RCTL, RAISE,   KC_UP,   KC_DOWN, KC_RGUI, KC_RCTL, \
-                                                   KC_BSPC, KC_RGUI,  KC_ENT,  KC_SPC \
+                                                   KC_BSPC, KC_LGUI,  KC_ENT,  KC_SPC \
   ),
 
   [_LOWER] =  LAYOUT( \
@@ -103,228 +96,266 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                    KC_DEL,  _______, _______, KC_INS \
   ),
 
-  /* ADJUST
-   * ,------------------------------------------------.  ,------------------------------------------------.
-   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  | RESET|  |      |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
-   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
-   * |      |      |QWERTY|COLEMK|DVORAK|DESTNY|      |  |      |      | PrSc | ScLk | NmLk |      |      |
-   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
-   * |      |      | Mute | Vol- | Vol+ |      |      |  |      |RGBTOG|RGBMOD|  HUI |  SAI | VAI  |      |
-   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-   * |      |      | Prev | Play | Next |      |      |  |      |      |RGBRMD|  HUD |  SAD | VAD  |      |
-   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-   * |      |      |      | Home | End  |      |      |  |      |      | PgUp | PgDn |      |      |      |
-   * `------+------+------+------+------+------+------|  |------+------+------+------+------+------+------'
-   *                                    | Del  |      |  |      | Ins  |
-   *                                    `-------------'  `-------------'
-   */
-
   [_ADJUST] =  LAYOUT( \
       _______, _______, _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_NLCK, _______, _______, \
       KC_CAPS, _______, QWERTY,  COLEMAK, DVORAK,  DESTINY, XXXXXXX, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, \
-      _______, _______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, _______, \
+      _______, _______, _______, RGB_SPI, RGB_SPD, _______, XXXXXXX, XXXXXXX, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
                                                    KC_DEL,  _______, _______, KC_INS \
       )
 };
 
-
-
-// define variables for reactive RGB
-bool TOG_STATUS = false;
-int RGB_current_mode;
-
-// Setting ADJ layer RGB back to default
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    #ifdef RGBLIGHT_ENABLE
-      //rgblight_mode(RGB_current_mode);
-    #endif
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}
-
 layer_state_t layer_state_set_user(layer_state_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
-}
+};
+
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
+  if (record->event.pressed) {
+   switch (keycode) {
     case DVORAK:
-      if (record->event.pressed) {
         set_single_persistent_default_layer(_DVORAK);
-      }
+      return false;
+    case DESTINY:
+        set_single_persistent_default_layer(_DESTINY);
+      return false;
+    case QWERTY:
+        set_single_persistent_default_layer(_QWERTY);
       return false;
     case COLEMAK:
-      if (record->event.pressed) {
         set_single_persistent_default_layer(_COLEMAK);
-      }
       return false;
-    case QWERTY:
+    case RGBRST:
+#if defined(RGBLIGHT_ENABLE)
+        eeconfig_update_rgblight_default();
+        rgblight_enable();
+#elif defined(RGB_MATRIX_ENABLE)
+        eeconfig_update_rgb_matrix_default();
+#endif
+      return false;
+#if defined(RGB_MATRIX_ENABLE) && defined(KEYBOARD_rgbkb_sol_rev2)
+    case RGB_TOG:
       if (record->event.pressed) {
-        set_single_persistent_default_layer(_QWERTY);
+        rgb_matrix_increase_flags();
       }
       return false;
-
-/*
-    Commenting this out since I removed the layer, but I want this in here for reference.
-
-    case FN:
+#endif
+    case RGB_MENU:
+#ifdef RGB_OLED_MENU
       if (record->event.pressed) {
-        //not sure how to have keyboard check mode and set it to a variable, so my work around
-        //uses another variable that would be set to true after the first time a reactive key is pressed.
-        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        if (get_mods() & MOD_MASK_SHIFT) {
+          rgb_encoder_state = (rgb_encoder_state - 1);
+          if (rgb_encoder_state > 5) {
+            rgb_encoder_state = 5;
+          }
         } else {
-          TOG_STATUS = !TOG_STATUS;
-          #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(15);
-          #endif
+          rgb_encoder_state = (rgb_encoder_state + 1) % 6;
         }
-        layer_on(_FN);
-      } else {
-        #ifdef RGBLIGHT_ENABLE
-          //rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
-        #endif
-        layer_off(_FN);
-        TOG_STATUS = false;
       }
+#endif
       return false;
-      break;
- */
-    case ADJUST:
-        if (record->event.pressed) {
-          layer_on(_ADJUST);
-        } else {
-          layer_off(_ADJUST);
-        }
-        return false;
-        break;
-      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-    case RGBRST:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          eeconfig_update_rgblight_default();
-          rgblight_enable();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      break;
+    }
   }
   return true;
+};
+
+// For RGBRST Keycode
+#if defined(RGB_MATRIX_ENABLE)
+void rgb_matrix_increase_flags(void)
+{
+    switch (rgb_matrix_get_flags()) {
+        case LED_FLAG_ALL: {
+            rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
+            rgb_matrix_set_color_all(0, 0, 0);
+            }
+            break;
+        case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: {
+            rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
+            rgb_matrix_set_color_all(0, 0, 0);
+            }
+            break;
+        case LED_FLAG_UNDERGLOW: {
+            rgb_matrix_set_flags(LED_FLAG_NONE);
+            rgb_matrix_disable_noeeprom();
+            }
+            break;
+        default: {
+            rgb_matrix_set_flags(LED_FLAG_ALL);
+            rgb_matrix_enable_noeeprom();
+            }
+            break;
+    }
 }
 
-void matrix_init_user(void) {
-    #ifdef RGBLIGHT_ENABLE
-      RGB_current_mode = rgblight_config.mode;
-    #endif
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
-    #endif
+void rgb_matrix_decrease_flags(void)
+{
+    switch (rgb_matrix_get_flags()) {
+        case LED_FLAG_ALL: {
+            rgb_matrix_set_flags(LED_FLAG_NONE);
+            rgb_matrix_disable_noeeprom();
+            }
+            break;
+        case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: {
+            rgb_matrix_set_flags(LED_FLAG_ALL);
+            rgb_matrix_set_color_all(0, 0, 0);
+            }
+            break;
+        case LED_FLAG_UNDERGLOW: {
+            rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
+            rgb_matrix_set_color_all(0, 0, 0);
+            }
+            break;
+        default: {
+            rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
+            rgb_matrix_enable_noeeprom();
+            }
+            break;
+    }
 }
+#endif
 
+#ifdef RGB_OLED_MENU
+uint8_t rgb_encoder_state = 4;
 
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
+typedef void (*rgb_matrix_f)(void);
 
-// hook point for 'led_test' keymap
-//   'default' keymap's led_test_init() is empty function, do nothing
-//   'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35);
-__attribute__ ((weak))
-void led_test_init(void) {}
+const rgb_matrix_f rgb_matrix_functions[6][2] = {
+    { rgb_matrix_increase_hue, rgb_matrix_decrease_hue },
+    { rgb_matrix_increase_sat, rgb_matrix_decrease_sat },
+    { rgb_matrix_increase_val, rgb_matrix_decrease_val },
+    { rgb_matrix_increase_speed, rgb_matrix_decrease_speed },
+    { rgb_matrix_step, rgb_matrix_step_reverse },
+    { rgb_matrix_increase_flags, rgb_matrix_decrease_flags }
+};
+#endif
 
-void matrix_scan_user(void) {
-    led_test_init();
-    iota_gfx_task();  // this is what updates the display continuously
-}
+#ifdef ENCODER_ENABLE
+
+static pin_t encoders_pad_a[] = ENCODERS_PAD_A;
+#define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a)/sizeof(pin_t))
+
+const uint16_t PROGMEM encoders[][NUMBER_OF_ENCODERS * 2][2]  = {
+    [_QWERTY] = ENCODER_LAYOUT( \
+        KC_VOLU, KC_VOLD,
+        KC_VOLU, KC_VOLD
+    ),
+    [_COLEMAK] = ENCODER_LAYOUT( \
+        _______, _______,
+        _______, _______
+    ),
+    [_FN] = ENCODER_LAYOUT( \
+        _______, _______,
+        _______, _______
+    ),
+    [_ADJ] = ENCODER_LAYOUT( \
+        _______, _______,
+        _______, _______
+    )
+};
 
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (!is_keyboard_master())
+    return;
+
+#ifdef RGB_OLED_MENU
+  if (index == RGB_OLED_MENU) {
+    (*rgb_matrix_functions[rgb_encoder_state][clockwise])();
+  } else
+#endif
+  {
+    uint8_t layer = biton32(layer_state);
+    uint16_t keycode = encoders[layer][index][clockwise];
+    while (keycode == KC_TRANSPARENT && layer > 0)
+    {
+      layer--;
+      if ((layer_state & (1 << layer)) != 0)
+          keycode = encoders[layer][index][clockwise];
+    }
+    if (keycode != KC_TRANSPARENT)
+      tap_code16(keycode);
   }
 }
+#endif
 
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_FN (1<<_FN)
-#define L_ADJ (1<<_ADJ)
-
-static void render_logo(struct CharacterMatrix *matrix) {
+// OLED Driver Logic
+#ifdef OLED_DRIVER_ENABLE
+ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (is_keyboard_master())
+    return OLED_ROTATION_270;
+  return rotation;
+}
 
-  static char logo[]={
+static void render_logo(void) {
+  static const char PROGMEM sol_logo[] = {
     0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
     0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
-    0};
-  matrix_write(matrix, logo);
-  //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0
+  };
+  oled_write_P(sol_logo, false);
 }
 
-
-
-void render_status(struct CharacterMatrix *matrix) {
-
+static void render_status(void) {
   // Render to mode icon
-  static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
-  if(keymap_config.swap_lalt_lgui==false){
-    matrix_write(matrix, logo[0][0]);
-    matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[0][1]);
-  }else{
-    matrix_write(matrix, logo[1][0]);
-    matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[1][1]);
+  static const char PROGMEM sol_icon[] = {
+    0x9b,0x9c,0x9d,0x9e,0x9f,
+    0xbb,0xbc,0xbd,0xbe,0xbf,
+    0xdb,0xdc,0xdd,0xde,0xdf,0
+  };
+  oled_write_P(sol_icon, false);
+
+  // Define layers here
+  oled_write_P(PSTR("     Layer-----"), false);
+  uint8_t layer = layer_state ? biton(layer_state) : biton32(default_layer_state);
+  switch (layer) {
+    case _DVORAK:
+      oled_write_P(PSTR("DVRAK"), false);
+      break;
+    case _DESTINY:
+      oled_write_P(PSTR("DSTNY"), false);
+      break;
+    case _QWERTY:
+      oled_write_P(PSTR("QWRTY"), false);
+      break;
+    case _COLEMAK:
+      oled_write_P(PSTR("COLMK"), false);
+      break;
+    case _LOWER:
+      oled_write_P(PSTR("LOWER"), false);
+      break;
+    case _RAISE:
+      oled_write_P(PSTR("RAISE"), false);
+      break;
+    case _ADJUST:
+      oled_write_P(PSTR("ADJST"), false);
+      break;
+    default:
+      oled_write_P(PSTR("UNDEF"), false);
   }
 
-  // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(matrix, PSTR("\nLayer: "));
-    switch (layer_state) {
-        case L_BASE:
-           matrix_write_P(matrix, PSTR("Default"));
-           break;
-        /* case L_FN:
-           matrix_write_P(matrix, PSTR("FN"));
-           break; */
-        case L_ADJ:
-        /* case L_ADJ_TRI: */
-           matrix_write_P(matrix, PSTR("ADJ"));
-           break;
-        default:
-           matrix_write(matrix, buf);
-    }
-
   // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (IS_HOST_LED_ON(USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (IS_HOST_LED_ON(USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(matrix, led);
-}
-
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
+    uint8_t led_state = host_keyboard_leds();
+    oled_write_P(PSTR("-----"), false);
+    oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR("     "), false);
+    oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR("     "), false);
+    oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR("     "), false);
+
+#ifdef RGB_OLED_MENU
+    static char buffer[31] = { 0 };
+    snprintf(buffer, sizeof(buffer), "h%3d s%3d v%3d s%3d m%3d e%3d ", rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v, rgb_matrix_config.speed, rgb_matrix_config.mode, rgb_matrix_get_flags());
+    buffer[4 + rgb_encoder_state * 5] = '<';
+
+    oled_write_P(PSTR("-----"), false);
+    oled_write(buffer, false);
 #endif
+}
 
-  matrix_clear(&matrix);
-  if(is_master){
-    render_status(&matrix);
-  }else{
-    render_logo(&matrix);
+void oled_task_user(void) {
+  if (is_keyboard_master()) {
+    render_status();
+  } else {
+    render_logo();
+    oled_scroll_left();
   }
-  matrix_update(&display, &matrix);
 }
 
-#endif
+#endif
\ No newline at end of file
diff --git a/keyboards/rgbkb/sol/keymaps/xyverz/rules.mk b/keyboards/rgbkb/sol/keymaps/xyverz/rules.mk
index bdec5946d..903d4619b 100644
--- a/keyboards/rgbkb/sol/keymaps/xyverz/rules.mk
+++ b/keyboards/rgbkb/sol/keymaps/xyverz/rules.mk
@@ -20,8 +20,11 @@ SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 ENCODER_ENABLE_CUSTOM = no  # Enable rotary encoder
 AUDIO_ENABLE = no
 
-OLED_ENABLE = yes           # OLED_ENABLE
+OLED_ENABLE = no            # OLED_ENABLE
 IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)
+DEFAULT_FOLDER = rgbkb/sol/rev1
+ENCODER_ENABLE = no
+OLED_DRIVER_ENABLE = yes
 
 # Do not edit past here