diff options
author | Drashna Jaelre <drashna@live.com> | 2019-11-20 12:37:24 -0800 |
---|---|---|
committer | GitHub <noreply@github.com> | 2019-11-20 12:37:24 -0800 |
commit | eb91c962886b1bb52c2d457a574cba09e2a8b0f0 (patch) | |
tree | 20f3d49671b6d42ca1edf285431e3e4120551228 /keyboards | |
parent | 8e8986b2506ca4cdd2339a441314a0838e3a4329 (diff) | |
download | qmk_firmware-eb91c962886b1bb52c2d457a574cba09e2a8b0f0.tar.gz |
[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)
* Add Kyria Keymap
* Enable all RGBLIGHT Animations for ARM and high capacity AVR
* Reduce GNUC version for __has_include
* Cleanup Ortho 4x12 Community layout
* Update Collide 39 keymap
* Cleanup Keymaps
* Enable full 30 LEDs for Ergodox
* Change EEPROM Load timing
* Use RGB Matrix on Planck Rev6
* Use correct keymap swap
* Enable everything for ARM
* Only enable rgb sleep on avr until crash is fixed
* Add additional Kyria keymap config
* Overhaul Kyria OLED display
* Improve kyria keymap based on usage
* Minor tweaks to rules
* Update OLED code to truncate properly
* Fix RGB Light layer indication
* Switch all of biton32 to get_highest_layer function
* Fix OLED Keylogger display
* Run qmk cformat over all of my user files
* Slight tweak to kyria based on usage
* Move around LALT_T config
* Add comments about base wrappers to keymaps
* Another cformat pass
* Temp fix for VUSB boards and NKRO
* Convert tabs to spaces in rules.mk files
* Only enable RGBLight if it's enabled
* Add Encoder Flip setting
* Update OLED font file
Diffstat (limited to 'keyboards')
-rw-r--r-- | keyboards/40percentclub/nano/keymaps/drashna/keymap.c | 10 | ||||
-rw-r--r--[-rwxr-xr-x] | keyboards/c39/keymaps/drashna/config.h | 9 | ||||
-rwxr-xr-x | keyboards/c39/keymaps/drashna/keymap.c | 132 | ||||
-rw-r--r-- | keyboards/c39/keymaps/drashna/rules.mk | 4 | ||||
-rw-r--r-- | keyboards/crkbd/keymaps/drashna/glcdfont.c | 9 | ||||
-rw-r--r-- | keyboards/crkbd/keymaps/drashna/keymap.c | 49 | ||||
-rw-r--r-- | keyboards/gergo/keymaps/drashna/keymap.c | 18 | ||||
-rw-r--r-- | keyboards/keebio/iris/keymaps/drashna/config.h | 3 | ||||
-rw-r--r-- | keyboards/keebio/iris/keymaps/drashna/keymap.c | 14 | ||||
-rw-r--r-- | keyboards/keebio/viterbi/keymaps/drashna/config.h | 31 | ||||
-rw-r--r-- | keyboards/keebio/viterbi/keymaps/drashna/keymap.c | 50 | ||||
-rw-r--r-- | keyboards/kyria/keymaps/drashna/config.h | 38 | ||||
-rw-r--r-- | keyboards/kyria/keymaps/drashna/keymap.c | 372 | ||||
-rw-r--r-- | keyboards/kyria/keymaps/drashna/rules.mk | 22 | ||||
-rw-r--r-- | keyboards/orthodox/keymaps/drashna/config.h | 45 | ||||
-rw-r--r-- | keyboards/orthodox/keymaps/drashna/keymap.c | 39 |
16 files changed, 654 insertions, 191 deletions
diff --git a/keyboards/40percentclub/nano/keymaps/drashna/keymap.c b/keyboards/40percentclub/nano/keymaps/drashna/keymap.c index 6c5b97457..668178967 100644 --- a/keyboards/40percentclub/nano/keymaps/drashna/keymap.c +++ b/keyboards/40percentclub/nano/keymaps/drashna/keymap.c @@ -1,12 +1,11 @@ -#include QMK_KEYBOARD_H #include "drashna.h" #include "analog.c" #include "pointing_device.h" #include "pincontrol.h" - #define KC_X0 LT(_FN, KC_ESC) +// clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT( KC_VOLU, KC_MPLY, KC_MPRV, RESET, @@ -14,6 +13,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; +// clang-format on // Joystick // Set Pins @@ -39,7 +39,7 @@ int16_t xOrigin, yOrigin; uint16_t lastCursor = 0; int16_t axisCoordinate(uint8_t pin, uint16_t origin) { - int8_t direction; + int8_t direction; int16_t distanceFromOrigin; int16_t range; @@ -57,8 +57,8 @@ int16_t axisCoordinate(uint8_t pin, uint16_t origin) { direction = 1; } - float percent = (float)distanceFromOrigin / range; - int16_t coordinate = (int16_t)(percent * 100); + float percent = (float)distanceFromOrigin / range; + int16_t coordinate = (int16_t)(percent * 100); if (coordinate < 0) { return 0; } else if (coordinate > 100) { diff --git a/keyboards/c39/keymaps/drashna/config.h b/keyboards/c39/keymaps/drashna/config.h index 361f68a78..5d53fe54b 100755..100644 --- a/keyboards/c39/keymaps/drashna/config.h +++ b/keyboards/c39/keymaps/drashna/config.h @@ -2,6 +2,11 @@ // place overrides here #undef MATRIX_COL_PINS -#define MATRIX_COL_PINS { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 } +#define MATRIX_COL_PINS \ + { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 } #undef MATRIX_ROW_PINS -#define MATRIX_ROW_PINS { B7, B1, B0 } +#define MATRIX_ROW_PINS \ + { B7, B1, B0 } + +#define RGB_DI_PIN B10 +#define RGBLED_NUM 15 diff --git a/keyboards/c39/keymaps/drashna/keymap.c b/keyboards/c39/keymaps/drashna/keymap.c index 9de75190d..882938138 100755 --- a/keyboards/c39/keymaps/drashna/keymap.c +++ b/keyboards/c39/keymaps/drashna/keymap.c @@ -1,45 +1,97 @@ -#include QMK_KEYBOARD_H +#include "drashna.h" -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _FN1 1 - -// Defines for task manager and such -#define CALTDEL LCTL(LALT(KC_DEL)) -#define TSKMGR LCTL(LSFT(KC_ESC)) +/* + * The `LAYOUT_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ +// clang-format off +#define LAYOUT_base( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \ + ) \ + LAYOUT_wrapper( \ + KC_ESC, K01, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, KC_DEL, \ + ALT_T(KC_TAB), K11, K12, K13, K14, K15, KC_BSPC, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ + KC_MLSF, CTL_T(K21), K22, K23, K24, LT(_LOWER,K25), KC_SPC, LT(_RAISE,K26), K27, K28, K29, RCTL_T(K2A), KC_ENT \ + ) +#define LAYOUT_base_wrapper(...) LAYOUT_base(__VA_ARGS__) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty - * ,----------------------------------------------------------------------------. ,-------------. - * | Q | W | E | R | T | Bksp | Y | U | I | O | P | | M1 | M2 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | A | S | D | F | G | Enter| H | J | K | L | ; | | M3 | M4 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | Z | X | C | V | B | FN1 | N | M | , | . | / | | M5 | M6 | - * `----------------------------------------------------------------------------' `-------------' - */ -[_QWERTY] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_1, KC_2, - KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_3, KC_4, - KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_5, KC_6 -), - -/* FN1 - * ,----------------------------------------------------------------------------. ,-------------. - * | 1 | 2 | 3 | 4 | 5 | Bksp | 6 | 7 | 8 | 9 | 0 | | M1 | M2 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | 4 | 5 | 6 | + | | Enter| | | | | | | M3 | M4 | - * |------+------+------+------+------+------+------+------+------+------+------+ |------+------| - * | 7 | 8 | 9 | 0 | | FN1 | | | | | | | M5 | M6 | - * `----------------------------------------------------------------------------' `-------------' - */ -[_FN1] = LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_BSPC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_1, KC_2, - KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT, _______, _______, _______, _______, _______, KC_3, KC_4, - KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, _______, _______, KC_5, KC_6 -), + [_QWERTY] = LAYOUT_base_wrapper( + _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, + _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, + _________________QWERTY_L3_________________, _________________QWERTY_R3_________________ + ), + + [_COLEMAK] = LAYOUT_base_wrapper( + _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, + _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, + _________________COLEMAK_L3________________, _________________COLEMAK_R3________________ + ), + + [_DVORAK] = LAYOUT_base_wrapper( + _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, + _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, + _________________DVORAK_L3_________________, _________________DVORAK_R3_________________ + ), + + [_WORKMAN] = LAYOUT_base_wrapper( + _________________WORKMAN_L1________________, _________________WORKMAN_R1________________, + _________________WORKMAN_L2________________, _________________WORKMAN_R2________________, + _________________WORKMAN_L3________________, _________________WORKMAN_R3________________ + ), + + [_NORMAN] = LAYOUT_base_wrapper( + _________________NORMAN_L1_________________, _________________NORMAN_L1_________________, + _________________NORMAN_L2_________________, _________________NORMAN_R2_________________, + _________________NORMAN_L3_________________, _________________NORMAN_R3_________________ + ), + + [_MALTRON] = LAYOUT_base_wrapper( + _________________MALTRON_L1________________, _________________MALTRON_R1________________, + _________________MALTRON_L2________________, _________________MALTRON_R2________________, + _________________MALTRON_L3________________, _________________MALTRON_R3________________ + ), + + [_EUCALYN] = LAYOUT_base_wrapper( + _________________EUCALYN_L1________________, _________________EUCALYN_R1________________, + _________________EUCALYN_L2________________, _________________EUCALYN_R2________________, + _________________EUCALYN_L3________________, _________________EUCALYN_R3________________ + ), + + [_CARPLAX] = LAYOUT_base_wrapper( + _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________, + _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________, + _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________ + ), + + [_MODS] = LAYOUT_wrapper( + _______, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______, + _______, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______, + KC_LSFT, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______ + ), + + [_LOWER] = LAYOUT_wrapper( + KC_TILD, _________________LOWER_L1__________________, _______, _________________LOWER_R1__________________, KC_BSPC, + KC_DEL, _________________LOWER_L2__________________, _______, _________________LOWER_R2__________________, KC_PIPE, + _______, _________________LOWER_L3__________________, _______, _________________LOWER_R3__________________, _______ + ), + + [_RAISE] = LAYOUT_wrapper( + KC_GRV, _________________RAISE_L1__________________, _______, _________________RAISE_R1__________________, KC_BSPC, + KC_DEL, _________________RAISE_L2__________________, _______, _________________RAISE_R2__________________, KC_BSLS, + _______, _________________RAISE_L3__________________, _______, _________________RAISE_R3__________________, _______ + ), + + [_ADJUST] = LAYOUT_wrapper( + KC_MAKE, _________________ADJUST_L1_________________, KC_NUKE, _________________ADJUST_R1_________________, KC_RST, + VRSN, _________________ADJUST_L2_________________, MG_NKRO, _________________ADJUST_R2_________________, EEP_RST, + TG_MODS, _________________ADJUST_L3_________________, KC_RGB_T,_________________ADJUST_R3_________________, RGB_IDL + ) }; +// clang-format on diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk index ae0cc9efe..d216f6abe 100644 --- a/keyboards/c39/keymaps/drashna/rules.mk +++ b/keyboards/c39/keymaps/drashna/rules.mk @@ -15,4 +15,6 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = yes # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 -RGBLIGHT_ENABLE = no # RGB Enable / Disable +RGBLIGHT_ENABLE = yes # RGB Enable / Disable + +RGBLIGHT_STARTUP_ANIMATION = yes diff --git a/keyboards/crkbd/keymaps/drashna/glcdfont.c b/keyboards/crkbd/keymaps/drashna/glcdfont.c index 998b5c408..2bfc3fac6 100644 --- a/keyboards/crkbd/keymaps/drashna/glcdfont.c +++ b/keyboards/crkbd/keymaps/drashna/glcdfont.c @@ -1,17 +1,18 @@ #pragma once #ifdef __AVR__ - #include <avr/io.h> - #include <avr/pgmspace.h> +# include <avr/io.h> +# include <avr/pgmspace.h> #elif defined(ESP8266) - #include <pgmspace.h> +# include <pgmspace.h> #else - #define PROGMEM +# define PROGMEM #endif // Corne 8x6 font with QMK Firmware Logo // Online editor: https://helixfonteditor.netlify.com/ +// clang-format off const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, diff --git a/keyboards/crkbd/keymaps/drashna/keymap.c b/keyboards/crkbd/keymaps/drashna/keymap.c index cd84f0d91..9a1beeb74 100644 --- a/keyboards/crkbd/keymaps/drashna/keymap.c +++ b/keyboards/crkbd/keymaps/drashna/keymap.c @@ -1,17 +1,17 @@ -#include QMK_KEYBOARD_H #include "drashna.h" -extern keymap_config_t keymap_config; -extern uint8_t is_master; +extern uint8_t is_master; #ifdef RGBLIGHT_ENABLE // Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif #ifdef OLED_DRIVER_ENABLE -static uint32_t oled_timer = 0; -static char keylog_str[6] = {}; -static uint16_t log_timer = 0; +# define KEYLOGGER_LENGTH 5 +static uint32_t oled_timer = 0; +static char keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"}; +static uint16_t log_timer = 0; +// clang-format off static const char PROGMEM code_to_name[0xFF] = { // 0 1 2 3 4 5 6 7 8 9 A B c D E F ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x @@ -37,7 +37,14 @@ void add_keylog(uint16_t keycode); enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE }; -// clang-format off +/* + * The `LAYOUT_crkbd_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ + #define LAYOUT_crkbd_base( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ @@ -155,7 +162,7 @@ void add_keylog(uint16_t keycode) { keycode = 0; } - for (uint8_t i = 4; i > 0; --i) { + for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) { keylog_str[i] = keylog_str[i - 1]; } @@ -168,7 +175,7 @@ void add_keylog(uint16_t keycode) { void update_log(void) { if (timer_elapsed(log_timer) > 750) { - //add_keylog(0); + // add_keylog(0); } } @@ -179,7 +186,7 @@ void render_keylogger_status(void) { void render_default_layer_state(void) { oled_write_P(PSTR("Lyout"), false); - switch (biton32(default_layer_state)) { + switch (get_highest_layer(default_layer_state)) { case _QWERTY: oled_write_P(PSTR(" QRTY"), false); break; @@ -268,7 +275,7 @@ void render_status_secondary(void) { /* Show Keyboard Layout */ render_default_layer_state(); render_layer_state(); - render_mod_status(get_mods()|get_oneshot_mods()); + render_mod_status(get_mods() | get_oneshot_mods()); render_keylogger_status(); } @@ -278,9 +285,11 @@ void oled_task_user(void) { oled_off(); return; } -#ifndef SPLIT_KEYBOARD - else { oled_on(); } -#endif +# ifndef SPLIT_KEYBOARD + else { + oled_on(); + } +# endif update_log(); if (is_master) { @@ -303,16 +312,12 @@ uint16_t get_tapping_term(uint16_t keycode) { #ifdef RGB_MATRIX_ENABLE -void suspend_power_down_keymap(void) { - rgb_matrix_set_suspend_state(true); -} +void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); } -void suspend_wakeup_init_keymap(void) { - rgb_matrix_set_suspend_state(false); -} +void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); } void check_default_layer(uint8_t mode, uint8_t type) { - switch (biton32(default_layer_state)) { + switch (get_highest_layer(default_layer_state)) { case _QWERTY: rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type); break; @@ -351,7 +356,7 @@ void rgb_matrix_indicators_user(void) { rgb_matrix_config.enable # endif ) { - switch (biton32(layer_state)) { + switch (get_highest_layer(layer_state)) { case _GAMEPAD: rgb_matrix_layer_helper(HSV_ORANGE, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW); break; diff --git a/keyboards/gergo/keymaps/drashna/keymap.c b/keyboards/gergo/keymaps/drashna/keymap.c index edc5a9e99..d1e622406 100644 --- a/keyboards/gergo/keymaps/drashna/keymap.c +++ b/keyboards/gergo/keymaps/drashna/keymap.c @@ -1,14 +1,12 @@ -/* Good on you for modifying your layout! if you don't have - * time to read the QMK docs, a list of keycodes can be found at - * - * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md - * - * There's also a template for adding new layers at the bottom of this file! - */ - -#include QMK_KEYBOARD_H #include "drashna.h" +/* + * The `LAYOUT_gergo_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ // clang-format off #define LAYOUT_gergo_base( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ @@ -17,7 +15,7 @@ ) \ LAYOUT_gergo_wrapper( \ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_PIPE, \ - KC_TAB, K11, K12, K13, K14, K15, _______, _______, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ + LALT_T(KC_TAB), K11, K12, K13, K14, K15, _______, _______, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ OS_LSFT, CTL_T(K21), K22, K23, K24, K25, _______, _______, _______, _______, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \ KC_GRV, KC_SPC, BK_LWER, OS_LALT, OS_RGUI, DL_RAIS, KC_ENT, _______ \ ) diff --git a/keyboards/keebio/iris/keymaps/drashna/config.h b/keyboards/keebio/iris/keymaps/drashna/config.h index 6fff5d72c..25678bd67 100644 --- a/keyboards/keebio/iris/keymaps/drashna/config.h +++ b/keyboards/keebio/iris/keymaps/drashna/config.h @@ -32,7 +32,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # undef RGBLED_NUM # define RGBLED_NUM 18 // Number of LEDs # undef RGBLED_SPLIT -# define RGBLED_SPLIT { 9, 9 } +# define RGBLED_SPLIT \ + { 9, 9 } # define RGBLIGHT_HUE_STEP 8 # define RGBLIGHT_SAT_STEP 8 # define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keebio/iris/keymaps/drashna/keymap.c b/keyboards/keebio/iris/keymaps/drashna/keymap.c index de19f7ca0..edfcd23e7 100644 --- a/keyboards/keebio/iris/keymaps/drashna/keymap.c +++ b/keyboards/keebio/iris/keymaps/drashna/keymap.c @@ -1,7 +1,13 @@ - -#include QMK_KEYBOARD_H #include "drashna.h" +/* + * The `LAYOUT_iris_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ + // clang-format off #define LAYOUT_iris_base( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ @@ -10,8 +16,8 @@ ) \ LAYOUT_wrapper( \ KC_ESC, ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________, KC_MINS, \ - KC_TAB , K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSLS, \ - KC_C1R3, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ + LALT_T(KC_TAB), K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSLS, \ + KC_C1R3, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ OS_LSFT, CTL_T(K21), K22, K23, K24, K25, OS_LALT, OS_RGUI, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \ KC_GRV, KC_SPC, LT(_LOWER,KC_BSPC), LT(_RAISE,KC_DEL), KC_ENT, RAISE \ ) diff --git a/keyboards/keebio/viterbi/keymaps/drashna/config.h b/keyboards/keebio/viterbi/keymaps/drashna/config.h index 201c02e41..40a5bbd0e 100644 --- a/keyboards/keebio/viterbi/keymaps/drashna/config.h +++ b/keyboards/keebio/viterbi/keymaps/drashna/config.h @@ -21,27 +21,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 5 #ifdef RGBLIGHT_ENABLE -# undef RGBLED_NUM -# define RGBLED_NUM 16 - -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 -# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2 -#endif // RGBLIGHT_ENABLE - - +# undef RGBLED_NUM +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 +# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2 +#endif // RGBLIGHT_ENABLE #undef PRODUCT -#define PRODUCT Drashnas Viterbi Macro Pad +#define PRODUCT Drashnas Viterbi Macro Pad #ifdef AUDIO_ENABLE -# define C6_AUDIO -# define NO_MUSIC_MODE +# define C6_AUDIO +# define NO_MUSIC_MODE #endif +// clang-format off #define LAYOUT_ortho_5x7( \ L00, L01, L02, L03, L04, L05, L06, \ L10, L11, L12, L13, L14, L15, L16, \ @@ -56,8 +54,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { L30, L31, L32, L33, L34, L35, L36 }, \ { L40, L41, L42, L43, L44, L45, L46 }, \ } +// clang-format on -#define QMK_ESC_OUTPUT F5 // usually COL -#define QMK_ESC_INPUT D4 // usually ROW +#define QMK_ESC_OUTPUT F5 // usually COL +#define QMK_ESC_INPUT D4 // usually ROW #define QMK_LED B0 #define QMK_SPEAKER C6 diff --git a/keyboards/keebio/viterbi/keymaps/drashna/keymap.c b/keyboards/keebio/viterbi/keymaps/drashna/keymap.c index 9c17c5a57..3b213418d 100644 --- a/keyboards/keebio/viterbi/keymaps/drashna/keymap.c +++ b/keyboards/keebio/viterbi/keymaps/drashna/keymap.c @@ -1,24 +1,15 @@ -#include QMK_KEYBOARD_H #include "drashna.h" -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - - // Fillers to make layering more clear -#define DIABLO TG(_DIABLO) -#define GAMEPAD TG(_GAMEPAD) -#define MEDIA TT(_MEDIA) +#define DIABLO TG(_DIABLO) +#define GAMEPAD TG(_GAMEPAD) +#define MEDIA TT(_MEDIA) - -//enum more_custom_keycodes { +// enum more_custom_keycodes { // KC_P00 = NEW_SAFE_RANGE //}; +// clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_NUMLOCK] = LAYOUT_ortho_5x7( @@ -55,32 +46,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; - - +// clang-format on bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { - - //switch (keycode) { - //case KC_P00: - // if (!record->event.pressed) { - // tap(KC_KP_0); - // tap(KC_KP_0); - // } - // return false; - // break; - //} - return true; + // switch (keycode) { + // case KC_P00: + // if (!record->event.pressed) { + // tap(KC_KP_0); + // tap(KC_KP_0); + // } + // return false; + // break; + //} + return true; } - - - void matrix_init_keymap(void) { - #ifndef CONVERT_TO_PROTON_C +#ifndef CONVERT_TO_PROTON_C setPinOutput(D5); writePinHigh(D5); setPinOutput(B0); writePinHigh(B0); - #endif +#endif } diff --git a/keyboards/kyria/keymaps/drashna/config.h b/keyboards/kyria/keymaps/drashna/config.h new file mode 100644 index 000000000..83d6283f5 --- /dev/null +++ b/keyboards/kyria/keymaps/drashna/config.h @@ -0,0 +1,38 @@ +/* Copyright 2019 Thomas Baart <thomas@splitkb.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define EE_HANDS + +#ifdef OLED_DRIVER_ENABLE +# define OLED_DISPLAY_128X64 +# define OLED_FONT_H "font_gmk_bad.h" +# define OLED_DISABLE_TIMEOUT +# define OLED_SCROLL_TIMEOUT_RIGHT 60000 +#endif + +#ifdef RGBLIGHT_ENABLE +# define RGBLIGHT_SLEEP +# define RGBLIGHT_LIMIT_VAL 200 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +#endif + +// If you are using an Elite C rev3 on the slave side, uncomment the lines below: +#define SPLIT_USB_DETECT +#define SPLIT_USB_TIMEOUT 1000 diff --git a/keyboards/kyria/keymaps/drashna/keymap.c b/keyboards/kyria/keymaps/drashna/keymap.c new file mode 100644 index 000000000..bdb00e596 --- /dev/null +++ b/keyboards/kyria/keymaps/drashna/keymap.c @@ -0,0 +1,372 @@ +#include "drashna.h" + +uint8_t is_master; + +#ifdef OLED_DRIVER_ENABLE +# define KEYLOGGER_LENGTH 10 +static uint32_t oled_timer = 0; +static char keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"}; +static uint16_t log_timer = 0; +// clang-format off +static const char PROGMEM code_to_name[0xFF] = { +// 0 1 2 3 4 5 6 7 8 9 A B c D E F + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x + 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', // 1x + '3', '4', '5', '6', '7', '8', '9', '0', 20, 19, 27, 26, 22, '-', '=', '[', // 2x + ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ', // 3x + ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ', 16, ' ', ' ', ' ', // 4x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 5x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 6x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 7x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 8x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 9x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ax + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Bx + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Cx + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Dx + 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ex + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ' // Fx +}; + +void add_keylog(uint16_t keycode); +#endif + +#ifndef UNICODE_ENABLE +# define UC(x) KC_NO +#endif + +/* + * The `LAYOUT_kyria_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ + +// clang-format off +#define LAYOUT_kyria_base( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \ + ) \ + LAYOUT_wrapper( \ + KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \ + LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ + OS_LSFT, CTL_T(K21), K22, K23, K24, K25, KC_NO, KC_NO, KC_NO, KC_NO, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \ + KC_MUTE, OS_LALT, KC_GRV, KC_SPC, BK_LWER, DL_RAIS, KC_ENT, OS_RGUI, UC(0x03A8), UC(0x2E2E) \ + ) +/* Re-pass though to allow templates to be used */ +#define LAYOUT_kyria_base_wrapper(...) LAYOUT_kyria_base(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_kyria_base_wrapper( + _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, + _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, + _________________QWERTY_L3_________________, _________________QWERTY_R3_________________ + ), + + [_COLEMAK] = LAYOUT_kyria_base_wrapper( + _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, + _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, + _________________COLEMAK_L3________________, _________________COLEMAK_R3________________ + ), + + [_DVORAK] = LAYOUT_kyria_base_wrapper( + _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, + _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, + _________________DVORAK_L3_________________, _________________DVORAK_R3_________________ + ), + + [_WORKMAN] = LAYOUT_kyria_base_wrapper( + _________________WORKMAN_L1________________, _________________WORKMAN_R1________________, + _________________WORKMAN_L2________________, _________________WORKMAN_R2________________, + _________________WORKMAN_L3________________, _________________WORKMAN_R3________________ + ), + + [_NORMAN] = LAYOUT_kyria_base_wrapper( + _________________NORMAN_L1_________________, _________________NORMAN_L1_________________, + _________________NORMAN_L2_________________, _________________NORMAN_R2_________________, + _________________NORMAN_L3_________________, _________________NORMAN_R3_________________ + ), + + [_MALTRON] = LAYOUT_kyria_base_wrapper( + _________________MALTRON_L1________________, _________________MALTRON_R1________________, + _________________MALTRON_L2________________, _________________MALTRON_R2________________, + _________________MALTRON_L3________________, _________________MALTRON_R3________________ + ), + + [_EUCALYN] = LAYOUT_kyria_base_wrapper( + _________________EUCALYN_L1________________, _________________EUCALYN_R1________________, + _________________EUCALYN_L2________________, _________________EUCALYN_R2________________, + _________________EUCALYN_L3________________, _________________EUCALYN_R3________________ + ), + + [_CARPLAX] = LAYOUT_kyria_base_wrapper( + _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________, + _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________, + _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________ + ), + [_MODS] = LAYOUT_wrapper( + _______, ___________________BLANK___________________, ___________________BLANK___________________, _______, + _______, ___________________BLANK___________________, ___________________BLANK___________________, _______, + KC_LSFT, ___________________BLANK___________________, _______, _______, _______, _______, ___________________BLANK___________________, KC_RSFT, + _______, _______, KC_LALT, _______, _______, _______, _______, KC_RGUI, _______, _______ + ), + [_LOWER] = LAYOUT_wrapper( + KC_F12, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11, + _______, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE, + _______, _________________LOWER_L3__________________, _______, _______, _______, _______, _________________LOWER_R3__________________, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_RAISE] = LAYOUT_wrapper( + KC_F12, _________________RAISE_L1__________________, _________________RAISE_R1__________________, KC_F11, + _______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS, + _______, _________________RAISE_L3__________________, _______, _______, _______, _______, _________________RAISE_R3__________________, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_ADJUST] = LAYOUT_wrapper( + KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET, + VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, + _______, _________________ADJUST_L3_________________, HPT_TOG, HPT_FBK, MG_NKRO, UC_MOD, _________________ADJUST_R3_________________, TG_MODS, + _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, _______ + ), +// [_LAYERINDEX] = LAYOUT_wrapper( +// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +// ), +}; +// clang-format on + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef OLED_DRIVER_ENABLE + oled_timer = timer_read32(); + add_keylog(keycode); +#endif +#ifndef SPLIT_KEYBOARD + if (keycode == RESET && !is_master) { + return false; + } +#endif + } + return true; +} +void matrix_init_keymap(void) { is_master = (uint8_t)is_keyboard_master(); } + +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } + +void add_keylog(uint16_t keycode) { + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) { + keycode = keycode & 0xFF; + } else if (keycode > 0xFF) { + keycode = 0; + } + + for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) { + keylog_str[i] = keylog_str[i - 1]; + } + + if (keycode < (sizeof(code_to_name) / sizeof(char))) { + keylog_str[0] = pgm_read_byte(&code_to_name[keycode]); + } + + log_timer = timer_read(); +} + +void update_log(void) { + if (timer_elapsed(log_timer) > 750) { + // add_keylog(0); + } +} + +void render_keylogger_status(void) { + oled_write_P(PSTR("Keylogger: "), false); + oled_write(keylog_str, false); +} + +void render_default_layer_state(void) { + oled_write_P(PSTR("Layout: "), false); + switch (get_highest_layer(default_layer_state)) { + case _QWERTY: + oled_write_ln_P(PSTR("Qwerty "), false); + break; + case _COLEMAK: + oled_write_ln_P(PSTR("Colemak"), false); + break; + case _DVORAK: + oled_write_ln_P(PSTR("Dvorak"), false); + break; + case _WORKMAN: + oled_write_ln_P(PSTR("Workman"), false); + break; + case _NORMAN: + oled_write_ln_P(PSTR("Norman"), false); + break; + case _MALTRON: + oled_write_ln_P(PSTR("Maltron"), false); + break; + case _EUCALYN: + oled_write_ln_P(PSTR("Eucalyn"), false); + break; + case _CARPLAX: + oled_write_ln_P(PSTR("Carplax"), false); + break; + } +} + +void render_layer_state(void) { + oled_write_ln_P(PSTR("Layer:"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("Lower"), layer_state_is(_LOWER)); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("Raise"), layer_state_is(_RAISE)); + oled_write_P(PSTR(" "), false); + oled_write_ln_P(PSTR("Mods"), layer_state_is(_MODS)); +} + +void render_keylock_status(uint8_t led_usb_state) { + oled_write_P(PSTR("Lock: "), false); + oled_write_P(PSTR("NUM"), led_usb_state & (1 << USB_LED_NUM_LOCK)); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("CAPS"), led_usb_state & (1 << USB_LED_CAPS_LOCK)); + oled_write_P(PSTR(" "), false); + oled_write_ln_P(PSTR("SCL"), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); +} + +void render_mod_status(uint8_t modifiers) { + oled_write_P(PSTR("Mods: "), false); + oled_write_P(PSTR("Sft"), (modifiers & MOD_MASK_SHIFT)); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("Ctl"), (modifiers & MOD_MASK_CTRL)); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("Alt"), (modifiers & MOD_MASK_ALT)); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("GUI"), (modifiers & MOD_MASK_GUI)); +} + +void render_bootmagic_status(void) { + /* Show Ctrl-Gui Swap options */ + static const char PROGMEM logo[][2][3] = { + {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}, + {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, + }; + oled_write_P(PSTR("Boot "), false); + oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui); + oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("NKRO"), keymap_config.nkro); + oled_write_P(PSTR(" "), false); + oled_write_ln_P(PSTR("GUI"), !keymap_config.no_gui); + oled_write_P(PSTR("Magic "), false); + oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui); + oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("GRV"), keymap_config.swap_grave_esc); + oled_write_P(PSTR(" "), false); + oled_write_ln_P(PSTR("CAPS"), keymap_config.swap_control_capslock); +} + +void render_user_status(void) { + oled_write_P(PSTR("USER: "), false); + oled_write_P(PSTR("Anim"), userspace_config.rgb_matrix_idle_anim); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("Layr"), userspace_config.rgb_layer_change); + oled_write_P(PSTR(" "), false); + oled_write_ln_P(PSTR("Nuke"), userspace_config.nuke_switch); +} + +// clang-format off +void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(qmk_logo, false); +} + +# ifndef SPLIT_TRANSPORT_MIRROR +void render_kyria_logo(void) { + static const char PROGMEM kyria_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0,192,224,240,124, 62, 31, 15, 7, 3, 1,128,192,224,240,120, 56, 60, 28, 30, 14, 14, 7, 7,135,231,127, 31,255,255, 31,127,231,135, 7, 7, 14, 14, 30, 28, 60, 56,120,240,224,192,128, 1, 3, 7, 15, 31, 62,124,240,224,192, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0,240,252,255, 31, 7, 1, 0, 0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135, 1, 0, 0,255,255, 0, 0, 1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192, 0, 0, 1, 7, 31,255,252,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,254,255,255, 1, 1, 7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30, 7, 1, 1,255,255,254, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0,255,255, 0, 0,192,192, 48, 48, 0, 0,240,240, 0, 0, 0, 0, 0, 0,240,240, 0, 0,240,240,192,192, 48, 48, 48, 48,192,192, 0, 0, 48, 48,243,243, 0, 0, 0, 0, 0, 0, 48, 48, 48, 48, 48, 48,192,192, 0, 0, 0, 0, 0, + 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31, 7,255,255, 7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0, 63, 63, 3, 3, 12, 12, 48, 48, 0, 0, 0, 0, 51, 51, 51, 51, 51, 51, 15, 15, 0, 0, 63, 63, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 48, 48, 63, 63, 48, 48, 0, 0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 15, 63,255,248,224,128, 0, 0, 3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128, 0, 0,255,255, 0, 0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15, 3, 0, 0,128,224,248,255, 63, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 62,124,248,240,224,192,128, 1, 3, 7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15, 7, 3, 1,128,192,224,240,248,124, 62, 15, 7, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 3, 7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15, 7, 3, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + oled_write_raw_P(kyria_logo, sizeof(kyria_logo)); +} +# endif +// clang-format on + +void render_status_main(void) { + /* Show Keyboard Layout */ + render_default_layer_state(); + render_keylock_status(host_keyboard_leds()); + render_bootmagic_status(); + render_user_status(); + + render_keylogger_status(); +} + +void render_status_secondary(void) { + /* Show Keyboard Layout */ + render_logo(); + render_default_layer_state(); + render_layer_state(); + render_mod_status(get_mods() | get_oneshot_mods()); + + render_keylogger_status(); +} + +void oled_task_user(void) { + if (timer_elapsed32(oled_timer) > 30000) { + oled_off(); + return; + } +# ifndef SPLIT_KEYBOARD + else { + oled_on(); + } +# endif + + update_log(); + if (is_master) { + render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + } else { +# ifdef SPLIT_TRANSPORT_MIRROR + render_status_secondary(); +# else + render_kyria_logo(); +# endif + } +} + +#endif + +#ifdef ENCODER_ENABLE +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + // Volume control + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + // Page up/Page down + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } +} +#endif diff --git a/keyboards/kyria/keymaps/drashna/rules.mk b/keyboards/kyria/keymaps/drashna/rules.mk new file mode 100644 index 000000000..c1a37f5c5 --- /dev/null +++ b/keyboards/kyria/keymaps/drashna/rules.mk @@ -0,0 +1,22 @@ +OLED_DRIVER_ENABLE = yes # Enables the use of OLED displays +ENCODER_ENABLE = yes # ENables the use of one or more encoders +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_STARTUP_ANIMATION = yes + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = yes # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs + +BOOTLOADER = atmel-dfu + +SPLIT_TRANSPORT = mirror diff --git a/keyboards/orthodox/keymaps/drashna/config.h b/keyboards/orthodox/keymaps/drashna/config.h index 4719c2269..585c91640 100644 --- a/keyboards/orthodox/keymaps/drashna/config.h +++ b/keyboards/orthodox/keymaps/drashna/config.h @@ -34,41 +34,40 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* key combination for magic key command */ #undef IS_COMMAND -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)) \ -) +#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT))) #ifdef RGBLIGHT_ENABLE -# define RGB_DI_PIN D3 -# define RGBLED_NUM 16 // Number of LEDs -# define RGBLED_SPLIT { 8, 8 } - -# define RGBLIGHT_HUE_STEP 12 -# define RGBLIGHT_SAT_STEP 12 -# define RGBLIGHT_VAL_STEP 12 -# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 -# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2 -#endif // RGBLIGHT_ENABLE +# define RGB_DI_PIN D3 +# define RGBLED_NUM 16 // Number of LEDs +# define RGBLED_SPLIT \ + { 8, 8 } + +# define RGBLIGHT_HUE_STEP 12 +# define RGBLIGHT_SAT_STEP 12 +# define RGBLIGHT_VAL_STEP 12 +# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 +# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2 +#endif // RGBLIGHT_ENABLE #ifdef AUDIO_ENABLE -# define C6_AUDIO -# ifdef RGBLIGHT_ENABLE -# define NO_MUSIC_MODE -# endif -#endif //AUDIO_ENABLE +# define C6_AUDIO +# ifdef RGBLIGHT_ENABLE +# define NO_MUSIC_MODE +# endif +#endif // AUDIO_ENABLE #undef PRODUCT #ifdef KEYBOARD_orthodox_rev1 -# define PRODUCT Drashna Hacked Orthodox Rev.1 +# define PRODUCT Drashna Hacked Orthodox Rev .1 #elif KEYBOARD_orthodox_rev3 -# define PRODUCT Drashna Hacked Orthodox Rev.3 +# define PRODUCT Drashna Hacked Orthodox Rev .3 #endif -#define QMK_ESC_OUTPUT D7 // usually COL +#define QMK_ESC_OUTPUT D7 // usually COL #ifdef KEYBOARD_orthodox_rev1 -# define QMK_ESC_INPUT D4 // usually ROW +# define QMK_ESC_INPUT D4 // usually ROW #else -# define QMK_ESC_INPUT D2 // usually ROW +# define QMK_ESC_INPUT D2 // usually ROW #endif #define QMK_LED B0 #define QMK_SPEAKER C6 diff --git a/keyboards/orthodox/keymaps/drashna/keymap.c b/keyboards/orthodox/keymaps/drashna/keymap.c index bf6b62b41..2dbe18634 100644 --- a/keyboards/orthodox/keymaps/drashna/keymap.c +++ b/keyboards/orthodox/keymaps/drashna/keymap.c @@ -1,35 +1,12 @@ -/* -This is the keymap for the keyboard - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2017 Art Ortenburger - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H #include "drashna.h" -#ifdef INDICATOR_LIGHTS -extern userspace_config_t userspace_config; - -uint8_t last_mod; -uint8_t last_led; -uint8_t last_osm; -#endif - +/* + * The `LAYOUT_orthodox_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ // clang-format off #define LAYOUT_orthodox_base( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ @@ -38,7 +15,7 @@ uint8_t last_osm; ) \ LAYOUT_wrapper( \ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \ - KC_TAB, ALT_T(K11), K12, K13, K14, K15, OS_LALT, OS_LGUI, OS_RALT, RAISE, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ + LALT_T(KC_TAB), K11, K12, K13, K14, K15, OS_LALT, OS_LGUI, OS_RALT, RAISE, K16, K17, K18, K19, K1A, RALT_T(KC_QUOT), \ KC_MLSF, CTL_T(K21), K22, K23, K24, K25, LOWER, KC_SPACE,KC_BSPC, KC_DEL, KC_ENT, RAISE, K26, K27, K28, K29, RCTL_T(K2A), KC_MRSF \ ) #define LAYOUT_orthodox_base_wrapper(...) LAYOUT_orthodox_base(__VA_ARGS__) |